Jump to content
SAU Community

Recommended Posts

So last night i took my car out for the first time for a mountain run and it wasnt great, brakes were not up to par and cornering resulted in lots of understeer and generally very sloppy. I know next to nothing about setting up suspension properly, all of the suspension is stock as far as i'm aware and i have coilovers on there, it squeaks when i go over bumps currently (i'm assuming bushes are worn out) and the brakes are 4 pot front and 2 pot rear (m spec stock brakes i think), i also have 225 tyres stretched over 9" wheels all round (getting 235's soon)

my question is what should i be looking at getting suspension wise (adjustable arms etc) and what's a good brake upgrade for a 32?

Link to comment
https://www.sau.com.au/forums/topic/459470-r32-brake-and-suspension-upgrade/
Share on other sites

brembos are quite expensive even second hand, would r33 brakes, slotted & dimpled rotors, good quality pads and braided lines make a good difference? or even all that on my standard r32 brakes?

Edited by sama1500

I have been reading through a few already and at this stage r33 brakes seem like a step up from 32 ones without draining my wallet, there's not as much on adjustable arms though, I know there's plenty of different arms/joints you can get but I'm mainly interested what out of thouse would be the most helpful for a street setup and what I wouldn't need to get

Well if I'm going to be doing pads, rotors, braided lines and fluid the cost of a set of r33 calipers on top of that isn't going to be much extra, so instead of doing all that on my r32 brakes and possibly finding out it's not enough I'll need to get new rotors and pads again along with 33 brakes

just coming up with evo stuff man, i was asking more along the lines of what bolts onto an r32, eg r33/r34 brakes, other nissans etc

Evo Brembo's have a much larger pad than the 32/33/34 GTR brembo's, hence why the Alpha gear is a good option, especially if you can get the evo 10 floating rotor.

Have you looked at Ksport upgrade kits? I picked up a set second hand, 8 piston kit for $700, better than both those options for track work.

The Nissan Brembos aren't much of an upgrade over the Sumitomos in my opinion.

the alpha gear is still a bit on the expensive side, i had a look at the ksport stuff and definitely out of my budget new, 33 brakes from what i found are the same as 32r brakes (not the vspec brembos) slightly bigger callipers, and rotor thickness + diameter, and they can be found quite cheap second hand leaving money over for braided lines, good pads and slotted/dimpled rotors, keep in mind my basis for comparison is stock r32 brakes with old pads so i dont think i'd need some crazy good setup for it to be an upgrade over what i have now

the main problem i was having was suspension wise, the car was quite bad when going through tight corners, understeer everywhere, what's a good measure i can take to fix this? arms/bushes etc

i think i may opt for r33 gtst brakes, they're a straight bolt on using the same lines and everything, may not be a massive difference from r32 brakes but coupled with all the support gear i think it will be a substantial difference, anyone with any knowledge on basic suspension tuning who could give me a few tips for dialing out understeer and generally making my car handle better?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...