Jump to content
SAU Community

Recommended Posts

Hey guys new to the forum and I've started modding my R33 GTST, so I've decided to go with the flex fuel option with the Link G4 ECU that's I've bought.
I've also bought a Walbro 450 E85 fuel pump.

I was recommended to get this fuel rail and injector package by my tuner so I want confirmation from you guys whether or not I should get it.

Mods are: pod filter, front mount, stock turbo (stock boost), 3 inch straight through exhaust with a decat, one hot dog and muffler.

11182225_1038655736147658_76848444121649

For stock plenum. Top feed 1000cc injectors.

Edited by Dan93
Link to comment
https://www.sau.com.au/forums/topic/459479-fuel-rail-and-injector-choice/
Share on other sites

Definately the best option going with that for the injectors only thing you will need to change on the aeroflow rail kit to fit the 1/2 size injectors on stock manifold is smaller spacers (8mm) and Orings for the plugs that go into the stock manifold are to big so you need slightly smaller diameter Oring.

Easiest way is talk to Scott on here or look at hes site http://scottyscustoms.com.auhe will sell you the kit with everything ready to bolt in at a good price.

  • Like 1

Definately the best option going with that for the injectors only thing you will need to change on the aeroflow rail kit to fit the 1/2 size injectors on stock manifold is smaller spacers (8mm) and Orings for the plugs that go into the stock manifold are to big so you need slightly smaller diameter Oring.

Easiest way is talk to Scott on here or look at hes site http://scottyscustoms.com.auhe will sell you the kit with everything ready to bolt in at a good price.

Ok well the kit consists of everything specifically for the RB25det non NEO, so I would assume that everything that is in that kit is perfect for it.

Has anyone used this kit yet? Also it's $750. Does that seem to be a decent price for what it is?

Quite a bit of money for a modest performance increase (based on running E85) . You will need a retune. Why not wait until you get a new turbo? The new rail is not necessary but if you want one its not that expensive I guess.

Quite a bit of money for a modest performance increase (based on running E85) . You will need a retune. Why not wait until you get a new turbo? The new rail is not necessary but if you want one its not that expensive I guess.

Hasn't been tuned yet as that ECU isn't in yet. I'm doing the fuel setup beforehand so it gets done in one go with no retune needed.

What do you mean "I'm doing the fuel setup beforehand so it gets done in one go with no retune needed" ?

Does this mean you plan to drive around for a while with these injectors in without tuning it?

I will either drive the car to the tuner and install it there or I will do it all at home and then get it put on a tow truck and taken to the tuners.

That kit won't just bolt in, not unless they have made different rail spacers. Do you have a link? Where is the kit from?

Also the lower plenum adapters won't fit into the stock plenum without changing the Orings to thinner ones. The rail kits are designed for Greddy plenums.

Ah, Garage7 in the watermark. Ring them and ask? I doubt they will know what you are talking about, and it will be your mechanic's problem when it doesn't fit, which you will have to pay for.

Alright guys thanks for the help. Has anyone dealt with garage7 in Adelaide before? They seem to be pretty damn good and a lot of help.

If you're on Facebook do a search for garage7 and look at their photos. Says it's a solution for stock plenum on rb25dets non Neo conversion from side to top feed.

Just looks like an Aeroflow rail kit to me, unless the pictures don't show the short spacers and second set of Orings?

I can only assume Garage7 are buying the whole kit including injectors from Aznew, which is my supplier, and they don't include either. I need to make the spacers to suit the short 40mm injectors.

Call them and ask, it's the only way to be sure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...