Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...
  • 1 month later...

What did you put in it Kat?

And does it go.....  clunk de clunk de clunk?  I hate that.

Mine is the V-spec and from what I can see it's a pain to put a 'normal' diff back in but looks like I have no choice with what I do with the car.

Is there an option other than to a 1.5 now? Is there a tru-track available anyone?

12 hours ago, DJBarnstar said:

Does the Nismo 1.5 go clunk de clunk de clunk?

I personally have not done my diffs to confirm or deny, though that is what i will be doing. 

@Piggaz Should be able to answer that for you if he is nice enough....

12 hours ago, DJBarnstar said:

Does the Nismo 1.5 go clunk de clunk de clunk?

The GT PRO is quite cranky with the Nismo oil it comes with. I switched to the OSG 80W-250 and it shuts it up by 85%. This was with solid alloy diff bushes but I've ditched them and put some Nismo rubber bushes in. Haven't driven the car yet but it should be a lot better again.

  • Like 2

I think you can get quafe for the rear as well. It also might be worth checking that the fluid is topped up for the rear diff. Right side of  the boot from memory.

Or you could sell it back to me.... :P

  • Like 1
On ‎15‎/‎11‎/‎2016 at 5:10 PM, DJBarnstar said:

Does the Nismo 1.5 go clunk de clunk de clunk?

 

On ‎16‎/‎11‎/‎2016 at 5:41 AM, Piggaz said:

The GT PRO is quite cranky with the Nismo oil it comes with. I switched to the OSG 80W-250 and it shuts it up by 85%. This was with solid alloy diff bushes but I've ditched them and put some Nismo rubber bushes in. Haven't driven the car yet but it should be a lot better again.

Like Piggas says.  Diff goes clunkety clunk even on the lowest setting.  Change the oil and it becomes liveable.

  • Like 2
  • 4 weeks later...
1 hour ago, DJBarnstar said:

Should I try and swap the current Nismo end caps with someone for stock GT-R ones?

 

I'm leaning that way.

 

What do you think?

20161216_200529.jpg

20161216_200547.jpg

I have a brand new set in packaging if you wish to swap. A bit of money your way too.

And thanks for the lead Anfanee. 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...