Jump to content
SAU Community

Another Coilpack Issue?

IM-32-FK

By IM-32-FK,
in General Maintenance

 Share

Recommended Posts

iruvyouskyrine Grand Master

iruvyouskyrine

Posted
Posted (edited)

This thread is a train wreck. I approve.

Pics of RB20 coilpack setup.

Pics of compo received for the time (4 hours) it took to take maybe 10 bolts, some plugs and replace 6 spark plugs.

Edited by iruvyouskyrine
  • Replies 93
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Dose Pipe Sutututu
Dose Pipe Sutututu

box gap

GTRPSI
GTRPSI

You didnt crack it from overtighting it, you cracked it because you didnt hold the socket straight at some point while tightening. If your holding the spark plug properly and tighten hard enough you

Trex
Trex

cut head in half to inspect.

Posted Images

IM-32-FK Mentor

IM-32-FK

Posted
  • Author
Posted

I bought a set of the same spark plugs just in 0.8 now it better fix it now i got a spare set of bcpr7es -11 if anyone want to buy $10 let me know only 100km used. Btw if this doesnt fix it im gonna link it hard

IM-32-FK Mentor

IM-32-FK

Posted
  • Author
Posted

f**k YES i figured it out and it was the MOST STUPID REASON WHY!!! YOU WILL NEVER GUESS...

are you ready....?

ONE OF THE f**kING SPARK PLUGS WERE CRACKED INSIDE THE CHAMBER BECAUSE I MUST OF OVER TIGHTENED IT!!!

REALLY?? AND GUESS WHAT, as i was putting one of the new spark plugs in, I ALSO CRACKED ONE. So i put one of my old spark plugs from before i did the service back in. So tomorrow im gonna have to go buy one more spark plugs

f**k me im stupid, who would of thought tightening these spark plugs would make the white part crack??

seriously i wasted $50(coilpacks) + $60(coilpack loom) + $35(new set of spark plugs)+ the time spent travelling and the labour.

Learn this lesson from me, NEVER overtighten ANYTHING!

  • Like 1
GTRPSI Mentor

GTRPSI

Posted
Posted

You didnt crack it from overtighting it, you cracked it because you didnt hold the socket straight at some point while tightening.

If your holding the spark plug properly and tighten hard enough you will strip the threads in the head and the porcelain part will still be fine.

.

  • Like 2
Trex Grand Master

Trex

Posted
Posted

You didnt crack it from overtighting it, you cracked it because you didnt hold the socket straight at some point while tightening.

If your holding the spark plug properly and tighten hard enough you will strip the threads in the head and the porcelain part will still be fine.

.

this.

IM-32-FK Mentor

IM-32-FK

Posted
  • Author
Posted

You didnt crack it from overtighting it, you cracked it because you didnt hold the socket straight at some point while tightening.

If your holding the spark plug properly and tighten hard enough you will strip the threads in the head and the porcelain part will still be fine.

.

i was using the extension bar and it moves around the socket a bit. I got up to the third cylinder before i cracked it. I hope i didnt over tighten the first 2 cylinders...

Trex Grand Master

Trex

Posted
Posted

i was using the extension bar and it moves around the socket a bit. I got up to the third cylinder before i cracked it. I hope i didnt over tighten the first 2 cylinders...

a rubber insert in the long socket helps keep the spark plug central and will avoid cracking.

IM-32-FK Mentor

IM-32-FK

Posted
  • Author
Posted

a rubber insert in the long socket helps keep the spark plug central and will avoid cracking.

my god i have one with a rubber socket but i didnt use it, i think because the spark plug didnt go all the way in or it would get stuck in it.

GTRPSI Mentor

GTRPSI

Posted
Posted

When putting new plugs in, bottom the plug out in the hole by hand with a extension, then tighten 2/3 to 3/4 (max) of a turn extra.

So run them in till they reach the end, then tighten the last 2/3-3/4 turn more.

Just use your left hands fingers to keep the extension centered while the right hand turns the extension.

  • Like 1
admS15 Grand Master

admS15

Posted
Posted

man i feel so stupid because i even cracked one of the new ones and i think little bits of plastic fell inside the head....someone please call me stupid

because it would make me feel better :glare:

Stupid,stupid,stupid. You asked I delivered. Feel better now :)

  • Like 1
hardsteppa Grand Master

hardsteppa

Posted
Posted

i'm pretty sure some awesome dude who knows heaps about european porn...I mean, cars...said

"spark plugs don't like being dropped. A cracked ceramic insulator can cause ignition issues"

spark plugs are one of the few things I use a torque wrench for, would suggest you do the same until you get the feel for them, or follow gtrpsi's guide above.

hardsteppa Grand Master

hardsteppa

Posted
Posted

i'll also just say, I like your attitude, seriously. You were prepared to have a go at it...ok, f*ked it up, but, acknowledged your mistake and have learnt something in the process. As long as no major damage caused, not a bad result at all. Although, I you're seriously concerned bits of ceramic fell in the cylinder and you haven't run the car yet, pull out the plug and use a vacuum hard up against the hole, vacuum out any bits of insulator in there.

s2d4 Rising Star

s2d4

Posted
Posted

f**k YES i figured it out and it was the MOST STUPID REASON WHY!!! YOU WILL NEVER GUESS...

are you ready....?

ONE OF THE f**kING SPARK PLUGS WERE CRACKED INSIDE THE CHAMBER BECAUSE I MUST OF OVER TIGHTENED IT!!!

REALLY?? AND GUESS WHAT, as i was putting one of the new spark plugs in, I ALSO CRACKED ONE. So i put one of my old spark plugs from before i did the service back in. So tomorrow im gonna have to go buy one more spark plugs

f**k me im stupid, who would of thought tightening these spark plugs would make the white part crack??

seriously i wasted $50(coilpacks) + $60(coilpack loom) + $35(new set of spark plugs)+ the time spent travelling and the labour.

Learn this lesson from me, NEVER overtighten ANYTHING!

Lesson is if it was fine before you touched it, then it's you.

It's always easier to blame everything else first though.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...