Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Can anyone confirm if the front kit would clear OEM R34 GTT 17x7.5" wheels (+35 I think)?

Perhaps give AOR a call. There isn't a huge amount of clearance on my 18" wheels and I think AOR suggest >= 17" racing wheels.

My 17x9.5 +18 with a 10mm slip on clears my fronts. Id say due to a smaller caliper on the rear I wont have any clearance issues!

My 17x9.5 +18 with a 10mm slip on clears my fronts. Id say due to a smaller caliper on the rear I wont have any clearance issues!

OEM wheels?

  • 1 month later...

My teks as above clear the brakes. About 5mm clearance though probably not ideal but they do. Either TC105N or Gram lights 57DR in 17s are next on the list for me as I don't want 18's. Hoping I can have the sizes I have always wanted, but ill be getting measurements before purchasing anything.

  • 3 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Nope. I already tried that with a mates pair of wheels. The inner barrel wont clear the caliper... :angry:

Sorry is this in reference to the R34 GTT stock wheel? By the barrel do you mean the inner diameter or the wheel?

I'm running 20mm spacers all around not sure if that will help with clearance?

  • 2 weeks later...

No 33gtr wheels don't clear, doubt 34 gtt wheels would clear too.

What are people running brake master wise with the front and rear kit? I have a bm44 standard and my pedal is spongy. Fitted a HFM BM57 and the rear brakes locked up and the pedal was rock solid after been applied a few times. BM50 time?

Had a bm57 installed when the fronts were installed based on the recommendation on the AOR website and follow up discussions during the front group buy. All good so far.

  • 3 weeks later...
  • 2 weeks later...
  • 4 months later...

For anyone who missed out, there is a new group buy started for the AOR adapter kits.

Edited by SLVR32GTR

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...