Jump to content
SAU Community

Recommended Posts

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work.

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work

i assume your talking about the M35 transmission? how much power would that be able to handle roughly

Edited by JosephFoley440

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

I wouldn't think the M35 trans bolts up - he would be talking about the WGNC34 trans.

Frankly I would give the R32 a miss and look for a small auto performance car.

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

That is trick but the box alone is $15k-$30k plus the padel air shift unit

c34 4wd stadea box would be the most cost effective way to do it

Then there is a company in sydney that make a T350-T400 auto adaptor kit to suit the GTR but these are really a race application setup

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

I don't have an objection to an auto GTR (I know some people do) but its more that you will need to go to a lot of trouble and expense to get an auto that will hold a lot of power. Also when you go to sell it after getting bored with being out-dragged at the lights by Honda Civics (unless you stall it up and do a full noise launch which can get a bit tiresome/embarrassing) you won't get your money back.

  • Like 1

Yeah I agree, the stagea box will be fine unless you are putting out some serious numbers, it will be by far the easiest option to fit and wire up.

And I reckon, if you want a GTR and you need an auto, go for it! It's your damn car, do what you like

  • Like 5

I would think the stag box would be plenty strong enough for a stock 32 GTR for cruising duties

Obviously if he wanted to race the car it would need something stronger like the TH350-400 or even 700 might be enough once built

Well the OP did say 400-500Hp, the stag box built should be good to a reliable 450 (abused) from what ive read about them.

If he wants more power than that, then open the cheque book and look at the T400 option for reliability.

It really does come down to his need due to his disability and his power goal.....everyone should have the right to do what they want to their car.

If he is concerned about reliability, dont constantly rape the car racing everyone.......lots of people out there running lots of power on stock manuals but they dont clutch dump and bang the gear shifts, avoiding the need to buy a OS88.

  • 4 weeks later...

The biggest issue you'll face is that the auto is controlled by the ecu. You could run the 26 off the 25 ecu with either an SAFC to put 2 afm signals into 1 or a selin dual maf translator kit. There is some jiggery pokery to get the tps and iac to work correctly on the 26 using the 25 computer.

The up side is that series 1 auto stageas go for next to nothing for one that has a ratty body.

You could even set the auto up on an aftermarket controller, but I'm uncertain on cost.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...