Jump to content
SAU Community

Recommended Posts

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work.

There is a limited auto selection that can been used for auto conversions in GTR's, the easiest conversion is using the auto from a Stagea 4WD but you wont get 5-6 gears.

From there upwards in power capacity there are stronger auto transmissions however expect even less gears.

The biggest cost is taking a auto and adapting it to take the GTR transfer case and bolt straight on, not a cheap exercise.

Your better off getting a built Stagea 4WD auto as most of it just bolts straight up, reducing the amount of engineering involved to make it work

i assume your talking about the M35 transmission? how much power would that be able to handle roughly

Edited by JosephFoley440

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

I wouldn't think the M35 trans bolts up - he would be talking about the WGNC34 trans.

Frankly I would give the R32 a miss and look for a small auto performance car.

WC34 (WGNC34 as Kiwirs4t pointed out), they ran the 2.5L straight 6, bolts straight to the rear of a RB26....obviously you will need the RS Four 4wd transmission to remain 4WD.

The M35 models got a V6 and it wont bolt up from my understanding.

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

That is trick but the box alone is $15k-$30k plus the padel air shift unit

c34 4wd stadea box would be the most cost effective way to do it

Then there is a company in sydney that make a T350-T400 auto adaptor kit to suit the GTR but these are really a race application setup

thanks for the help man much appreciated ill do some research

Kiwirs4t whys that man i know a lot of people are disappointed to see a auto GTR but I've always wanted to own one so i figure why not :)

I don't have an objection to an auto GTR (I know some people do) but its more that you will need to go to a lot of trouble and expense to get an auto that will hold a lot of power. Also when you go to sell it after getting bored with being out-dragged at the lights by Honda Civics (unless you stall it up and do a full noise launch which can get a bit tiresome/embarrassing) you won't get your money back.

  • Like 1

Yeah I agree, the stagea box will be fine unless you are putting out some serious numbers, it will be by far the easiest option to fit and wire up.

And I reckon, if you want a GTR and you need an auto, go for it! It's your damn car, do what you like

  • Like 5

I would think the stag box would be plenty strong enough for a stock 32 GTR for cruising duties

Obviously if he wanted to race the car it would need something stronger like the TH350-400 or even 700 might be enough once built

Well the OP did say 400-500Hp, the stag box built should be good to a reliable 450 (abused) from what ive read about them.

If he wants more power than that, then open the cheque book and look at the T400 option for reliability.

It really does come down to his need due to his disability and his power goal.....everyone should have the right to do what they want to their car.

If he is concerned about reliability, dont constantly rape the car racing everyone.......lots of people out there running lots of power on stock manuals but they dont clutch dump and bang the gear shifts, avoiding the need to buy a OS88.

  • 4 weeks later...

The biggest issue you'll face is that the auto is controlled by the ecu. You could run the 26 off the 25 ecu with either an SAFC to put 2 afm signals into 1 or a selin dual maf translator kit. There is some jiggery pokery to get the tps and iac to work correctly on the 26 using the 25 computer.

The up side is that series 1 auto stageas go for next to nothing for one that has a ratty body.

You could even set the auto up on an aftermarket controller, but I'm uncertain on cost.

  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...