Jump to content
SAU Community

Recommended Posts

Good time Ian, you must have had some fun.:rofl:

Hi Gary, yes it was a lot of fun racing at Oran Park, i found it quite dificult really but i enjoyed it and i think it like Wakefield teaches you to drive better. Different to Eastern Creek where its just fast. The R33 was going really well yesteday, the only thing was that the rear tyres started rubbing on the alluminium spring supports and was making heaps of smoke under acceleration. But it wasn't until the drive home that the Hi Cas light started flashing on and off and the Indicators wouldn't cancel and the Turbo started making a different spool up noise. Also for some reason the steering wheel wasn't centered. Were checking it all out cause I want to have it all going for Round 4 at EC in 3 weeks time.

Thanks Gary

Ian.

Hi benm. Yes that was me, I had the only Skyline racing yesterday at Oran Park.

Ian

I had the other burgundy r33 parked not far from you out the back in the pits (spectating). I didn't realise you were SAU and everytime I was out in the pits you had about 10 people around ur car so didn't say hello.

I Was there watching from about midday - 3pm. Looks like your rear end was quite loose most of the day, very twitchy coming off the bridge (from memory you even spun there once) and also the following right-left. I timed 2 of your sessions and you were doing pretty consistent 23-25's even with the ass end all floating around.

That ex race car Alfa was only doing 1:20's and afew MX5's were doing 1:23's (going by my timing). A couple of those open wheel things were down in the 1:14's and were screaming down the straight, loved it.

Looked like a pretty decent day except for only getting 3-4 timed laps per session (which was about every hour). I think they could have let a few more cars on the track or allowed 6-7 timed laps for each group but then again looks like their was plenty of other organisation going on behind the scenes. Probably 1 of the best trackdays as far as turnout and organisation.

Where can I find more info on those sprint days? Future trackdays/costs etc?

http://www.nswrrc.com/

Forget the slicks, just get out there and give it a punt. :rofl:

Super Sprints are great fun, but days like last Friday are a lot better value as you get 20mins sessions, and the pace of the driving is a lot mroe relaxed wiht regards to passing other cars.

And if like me you run into trouble you still have plenty of time to get thing sorted and get back out there.

I had the other burgundy r33 parked not far from you out the back in the pits (spectating). I didn't realise you were SAU and everytime I was out in the pits you had about 10 people around ur car so didn't say hello.

I Was there watching from about midday - 3pm. Looks like your rear end was quite loose most of the day, very twitchy coming off the bridge (from memory you even spun there once) and also the following right-left. I timed 2 of your sessions and you were doing pretty consistent 23-25's even with the ass end all floating around.

That ex race car Alfa was only doing 1:20's and afew MX5's were doing 1:23's (going by my timing). A couple of those open wheel things were down in the 1:14's and were screaming down the straight, loved it.

Looked like a pretty decent day except for only getting 3-4 timed laps per session (which was about every hour). I think they could have let a few more cars on the track or allowed 6-7 timed laps for each group but then again looks like their was plenty of other organisation going on behind the scenes. Probably 1 of the best trackdays as far as turnout and organisation.

Where can I find more info on those sprint days? Future trackdays/costs etc?

Yes benm, I noticed your car parked there and thought it looked great. I think it was mostly me not knowing the track and trying too hard at the wrong time. I was comming off the bridge in 3rd gear and the rear wheels were spinning and just a little further down the track, the road drops down and its off camber.

I had 6 runs on the day which was pretty good.

If you want to compete in the next Supersprint its at EC on Saturday 4th June. Its hosted by Mini Car Club. I havn't recieved the supp regs yet but when i do I can let you know who the Secretary is and all you have to do is contact the Secretary and their is always vacancys. You need a CAMS 2S Licence which cost around $80 and you can get directly through Skylines NSW Branch, but might be quicker downloading the Licence Application from CAMS and forwarding it on. The days racing is around $150. You also need a fire extinguisher and long sleve and trousers and fireproof shoes (leather). There are 4 more meets after EC. Oran Park South, EC, Oran Park GP, and Oran Park GP.

If you want you can contact the Secretary of the Mini Car Club and ask directly for the supp regs and entry form or when i find out i can let you know.

Cheers benm

Ian

OK for anyone that is interested. The next Round of the NSW Supersprint Chps is at Eastern Creek on Saturday 4th July. It is hosted by Mini Car Club and the Secretary of that club is.

Club Name: MINI CAR CLUB OF NSW

http://www.miniclub.com.au

Club Contact: JOAN VAUGHAN

Address: MINI CAR CLUB OF NSW

PO BOX 164

MORTDALE

NSW 2223

Telephone: 9153 7635 (Home)

9153 7635 (Business)

Fax: 9153 7635 (Business)

Email: [email protected]

Event Types: SPEED,MOTORKHANA,ROAD,RALLY,SOCIAL

Hi Roy, I understand what your saying about Club days at a circuit are good value for money and overtaking is much more frequentthan Supersprint days, although overtaking in Supersprints is fine under most circumstnces. Most of the damage i've seen is caused by someone losing control and getting banged by somone who can't avoid running into. I've gotta consider that what i'm driving is how i'm getting home. LOL.

Ian

Were you in the maroon R33 yesterday?

Hey benm, I just got the official results from CAMS and out of all the cars that competed on Sunday, I was the 9th fastest overall. Behind a few Open Wheelers, Clubmen with Carbon Fiber guards and Suzuki Halebusa engines. What I love most about the whole thing is that I drove the car to the circuit with 4 semi slick tyres and wheels on the back seat and in the boot and 2 passengers and a full tank of fuel. Nothing lightened including Stereo and Air Conditioning...the works. I finished 2nd in SV Class overall behind a full on racing Alfa. I am winning SV Class overall after 3 rounds and I change the tyres after the races and drive home to Forster all in the same day. That's satisfying.

Ian

That's a great result, nothing like a car that you can take to the track with minimal effort.

I liked the variation in cars, everything from datto 1600's thru to vr commodores it was interesting to watch especially all the cars that visited the sand trap at turn 1 :P

Keep us posted on the following events (im likely to forget unless someone reminds me) and i'll be out to spectate again.

  • 2 weeks later...

SAU Nickname: clayoth

Car Make and Model: WRX

Circuit Name: Philip Island

Lap time: 1:47.44

Circuit Name: Winton

Lap time: 1:33.98

Lap time: 1:38.20 (R spec tyres)

Circuit Name: Calder

Lap time: 1:04.64

Circuit Name: Sandown

Lap time: 1:23.43

Lap time: 1:24.86 (R spec tyres)

Modifications

Engine: 2.13l

Power: 180 kw atw (221kw for Winton)

Suspension: Apexi N1

Tyres: Dunlop Slicks

Brakes: CSC

Body weight: 1150

I would estimate that slicks are worth the noted amounts of time over R spec tyres at the following tracks:

Phillip Island - about 4 sec

Winton - 3 to 4 sec

Sandown - 2 to 3 sec

Calder - about 1 sec

It would be fun to get a data logger, road tyres, r spec tyres and slicks together and see what the differences are on the same day at the same track.

...

It would be fun to get a data logger, road tyres, r spec tyres and slicks together and see what the differences are on the same day at the same track.

LOL, ive got the data logger and the semis, feel free to lend me the slicks:)

Interior.jpg

Problem is i dont have a cage so not allowed to run slicks:(

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...