Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

SAU Nickname: JDSracing

Car Make and Model: 95 R33 GTST

Circuit Name: Wakefield

Lap time: 1:12.4

Modifications

Engine: Front Mount / Exhaust / 9 psi

Power: approx 160kw

Suspension: Tanabe Circuit Coilovers, Tein Tie Rods, Natetune Castor Rods

Tyres: dead RT215s (on the belts now)

Brakes: standard discs / calipers with RBF600, Ferodo DS2500s, braided lines

Body weight: unknown

Still a bit off the pace, but getting there slowly. Give me another 12 months and a bit more experience and I'll hopefully catch up to the top 10 (assuming the tail end doesn't get too much faster!)

SAU Nickname: Peterm13

Car Make and Model: 96 200sx S14

Circuit Name: Sandown

Lap time: 1:40

Modifications full exhaust,pod(with shield), 7psi.

Engine: SR20det 5spd

Power: 130-140kw

Suspension: stock

Tyres: Pirelli Dragon, 235-45-17

Brakes: standard

Body weight: standard

I just started sprints this year, only managed to do sandown twice and the island twice.

By next meeting (feb/march 08 ) will have FMIC and hopefully coilovers ! :w00t:

  • 1 month later...

not from me! :thumbsup:

After a bit on instruction from Paul K (Aussie Car champion 2006) I started doing ok!

but then it just got too wet so I was doing a few "slides" away from everyone!

I had one stuff up though, the straight just before last turn - I came in too hot, went past the braking point, and went off into the mud! :) was just sooooooooooo wet there!

Unfort a lancer EVO hit a wall and the bloke went to hospital :(

Greg (v s p e c ) had many spins :(

I got John Boston out there in my car with Georgie in the passenger seat, I said to him "make sure she has a grin on her face!"

He was putting on a great show!!!! He said my car needs more power though :( haha and the front end grip wasnt too bad, car seemed predictable, he enjoyed it!

not from me! :thumbsup:

After a bit on instruction from Paul K (Aussie Car champion 2006) I started doing ok!

but then it just got too wet so I was doing a few "slides" away from everyone!

I had one stuff up though, the straight just before last turn - I came in too hot, went past the braking point, and went off into the mud! :) was just sooooooooooo wet there!

Unfort a lancer EVO hit a wall and the bloke went to hospital :(

Greg (v s p e c ) had many spins :(

I got John Boston out there in my car with Georgie in the passenger seat, I said to him "make sure she has a grin on her face!"

He was putting on a great show!!!! He said my car needs more power though :( haha and the front end grip wasnt too bad, car seemed predictable, he enjoyed it!

1:20 isn't bad at all for a first time effort in pouring rain. I was hoping you'd get a dry run though, to see how you'd go against my time :)

EVO hit a wall? how on earth did that happen? Was it the main straight wall or did he spear off somewhere up the back?

hahah yeah slightly wet :thumbsup:

Apparantly was understeering last turn...and snapped back and well over corrected then went drivers side into the wall right at the start, The tyre wall, near the joining of the armco barrier along the straight.

post-24539-1200878890_thumb.jpg

Hi All,

Down to a 1.06.2 at Wakefield on the old motor.....hopefully the new motor gives me a bit more grunt out of the corner to crack into the 1.05's

Down to a 1.44.4 at Eastern Creek with an even older motor(built in 1992)....next year 1.43's or bust.

Oh yeh the car....GMS R31....doubt the Stagea would do those times...lol

Much difference now that the place has been resurfaced?

SAU Nickname: Jetwreck

Car Make and Model: R31 GTS (or GMS R31)

Circuit Name: Easter Creek

Lap time: 1.44.4 (natsoft)

Circuit Name: Easter Creek

Lap time: 1.06.2 (natsoft)

Modifications

Engine: RB20

Power: Enough....but we always want more

Suspension: Ah...no answer

Tyres: Kumo

Brakes: What ever suits the circuit.

Body weight: 1,200KG

Circuit Name: Easter Creek

Lap time: 1.06.2 (natsoft)

I guess your talking about Wakefield?

I think it was still the old surface the last time I went...not sure though as I hadn't been there for about 6 years before that......It was at the Fujitsu Super Taxi Weekend in March 2007!

SAU Nickname: Jetwreck

Car Make and Model: R31 GTS (or GMS R31)

Circuit Name: Easter Creek

Lap time: 1.44.4 (natsoft)

Circuit Name: Easter Creek

Lap time: 1.06.2 (natsoft)

Modifications

Engine: RB20

Power: Enough....but we always want more

Suspension: Ah...no answer

Tyres: Kumo

Brakes: What ever suits the circuit.

Body weight: 1,200KG

Circuit Name: Easter Creek

Lap time: 1.06.2 (natsoft)

Which GMS car is it? They are works of art and sound great :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
    • Pull codes via the self-diagnosis procedure. As far as I can tell this is just a sign of transmission issues but not a code unto itself.
×
×
  • Create New...