R33 Fitment

[TLinny23]

Hey guys. I want to run 18x10.5+20 on my r33 Gtst. I'm planning on rolling my fenders if needed and getting extended studs as well. Anyone ever run this setup and maybe have pictures and a description on what they had to do. Thanks

[Hadouken]

Sure

[GTSBoy]

Why not?

[Ben C34]

Do it

[iruvyouskyrine]

Are you running atmospheric blow off valve?

[Hadouken]

Will affect fitment

[KiwiRS4T]

Why the extended studs?

[Ben C34]

All the thread

[TLinny23]

Reason for studs is that I have a 5 mm spacer on the front right now. The amount of thread that the lug nut grips to is just not enough for me to feel comfortable. It's kind of a last minute resort thing.

[GTSBoy]

What's a lug nut?

[GTSBoy]

Or more to the point, what is a lug that is held on by the nut?

[niZmO_Man]

You should run 205 wide tyres.

[75coupe]

G O O G L E I S Y O U R F R I E N D

http://www.sau.com.au/forums/topic/437712-r33-fitment/

[TLinny23]

I probably read about 20 different threads about r33's and searched pages for hours and somehow I didn't come across that thread. Thank you

[75coupe]

First result

[PranK]

Hey guys just posting shit - go to wasteland. Took 11 replies before a helpful one.

[R31 drift pig]

Seriously. We get it. A lot of you guys don't like fitment/hellaflush/whatever you want to call it. Fine. No worries. Doesn't mean you have to bag on EVERY f**king person that asks a question related to it. Kinda tired of reading it to be honest.

I may not like everything you do to you cars, but I won't talk shit about you or your car for doing so.

To the OP, I ran 18x10.5 +15 on my 33, quite low, some camber and a rolled/flared guard. Used a 235/40 rear tyre too. Had room for wider if needed, but not much more.

Edited March 10, 2016 by R31 drift pig

[PranK]

To the OP, I ran 18x10.5 +15 on my 33, quite low, some camber and a rolled/flared guard. Used a 235/40 rear tyre too. Had room for wider if needed, but not much more.

This.

Looks unreal! More pics?

[R31 drift pig]

Couple... Thanks for the kind words.

Was a bit rough then, and now no longer has that wheel combo on it, now has GTR +35mm rears, and 18x10/18x12 Work VSKF's, more low, and fresh paint.

[R31 drift pig]

To the OP, It'll just need a good roll/flare in the back, 235/40, 245/40 or a 245/35 tyre, it'll fit fine. Yours will sit 5mm further in, which is equal to pulling 1 degree of camber out. 1 degree negative = 5mm top of wheel in.

If you get a bit aggressive with the roller, you could pump enough to fit a 265/35 if you wanted to, which was my plan, but was easier to fit over fenders.

Hope that helps.

Edited March 10, 2016 by R31 drift pig