Jump to content
SAU Community

Recommended Posts

Ok Bob you'll need to confirm that with Terry/Motive.

I'm not sure what the process is for that but while we have involvement with it (it's mostly our members) it's separate to the entries here.

Ok Bob you'll need to confirm that with Terry/Motive.

I'm not sure what the process is for that but while we have involvement with it (it's mostly our members) it's separate to the entries here.

OK....... Thanks Kat.

Bob.

We have it Des.

As I've said all along, don't panic. If you put your name in this thread, we'll crosscheck and let you know with plenty of time if it doesn't line up.

That's why I'm closing our entries earlier.

Bit of info from Andrew around the day:

Gates open to traders and Heritage Display at 0730
Gates open to pre-entrants at 0800
Gates open to on day entries at 0900
Gates open to general spectators at 1000
Racing starts at 1000
Gates to leave open at 1300
Event closes at 1700
** Passengers can buy spectator tickets on arrival

GT-R Radial Pro Shootout and Pro/Exhibition runs are being held at: 1130, 1130, 1430 and finals at 1330

Heritage display open times are 1100, 1300 and 1500
This is where the cars are opened up

Final schedule will be released week of event and all entrant will be given a map and schedule on arrival

We have it Des.

As I've said all along, don't panic. If you put your name in this thread, we'll crosscheck and let you know with plenty of time if it doesn't line up.

That's why I'm closing our entries earlier.

No worries! Thanks Kat... Andrew just sent me an email saying i paid him but he doesnt have my form... lol

I told him i submitted to you - and just sent him a copy for his reference... he said no worries =)

Thanks for this!

Bit of info from Andrew around the day:

Gates open to traders and Heritage Display at 0730

Gates open to pre-entrants at 0800

Gates open to on day entries at 0900

Gates open to general spectators at 1000

Racing starts at 1000

Gates to leave open at 1300

Event closes at 1700

** Passengers can buy spectator tickets on arrival

GT-R Radial Pro Shootout and Pro/Exhibition runs are being held at: 1130, 1130, 1430 and finals at 1330

Heritage display open times are 1100, 1300 and 1500

This is where the cars are opened up

Final schedule will be released week of event and all entrant will be given a map and schedule on arrival

for those that bought the display mega pack and have VIP entry, are they with the 7.30 crowd?

for those that bought the display mega pack and have VIP entry, are they with the 7.30 crowd?

I was wondering this also.

Because being part of the SAU crew, we would all be put together i assume, but do we still get a larger display area if we have paid for it in the pack?

  • Like 1

You're more than welcome to join us as a forum member Jase. Pop SAU on the form and get it over to us if you're keen :)

Hey Kat,

I will be entering my GTR in the club display. Can you please confirm the SAU NSW email address so I can send in my form

Jase

Edited by gts25



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...