Jump to content
SAU Community

Recommended Posts

Ok Bob you'll need to confirm that with Terry/Motive.

I'm not sure what the process is for that but while we have involvement with it (it's mostly our members) it's separate to the entries here.

Ok Bob you'll need to confirm that with Terry/Motive.

I'm not sure what the process is for that but while we have involvement with it (it's mostly our members) it's separate to the entries here.

OK....... Thanks Kat.

Bob.

We have it Des.

As I've said all along, don't panic. If you put your name in this thread, we'll crosscheck and let you know with plenty of time if it doesn't line up.

That's why I'm closing our entries earlier.

Bit of info from Andrew around the day:

Gates open to traders and Heritage Display at 0730
Gates open to pre-entrants at 0800
Gates open to on day entries at 0900
Gates open to general spectators at 1000
Racing starts at 1000
Gates to leave open at 1300
Event closes at 1700
** Passengers can buy spectator tickets on arrival

GT-R Radial Pro Shootout and Pro/Exhibition runs are being held at: 1130, 1130, 1430 and finals at 1330

Heritage display open times are 1100, 1300 and 1500
This is where the cars are opened up

Final schedule will be released week of event and all entrant will be given a map and schedule on arrival

We have it Des.

As I've said all along, don't panic. If you put your name in this thread, we'll crosscheck and let you know with plenty of time if it doesn't line up.

That's why I'm closing our entries earlier.

No worries! Thanks Kat... Andrew just sent me an email saying i paid him but he doesnt have my form... lol

I told him i submitted to you - and just sent him a copy for his reference... he said no worries =)

Thanks for this!

Bit of info from Andrew around the day:

Gates open to traders and Heritage Display at 0730

Gates open to pre-entrants at 0800

Gates open to on day entries at 0900

Gates open to general spectators at 1000

Racing starts at 1000

Gates to leave open at 1300

Event closes at 1700

** Passengers can buy spectator tickets on arrival

GT-R Radial Pro Shootout and Pro/Exhibition runs are being held at: 1130, 1130, 1430 and finals at 1330

Heritage display open times are 1100, 1300 and 1500

This is where the cars are opened up

Final schedule will be released week of event and all entrant will be given a map and schedule on arrival

for those that bought the display mega pack and have VIP entry, are they with the 7.30 crowd?

for those that bought the display mega pack and have VIP entry, are they with the 7.30 crowd?

I was wondering this also.

Because being part of the SAU crew, we would all be put together i assume, but do we still get a larger display area if we have paid for it in the pack?

  • Like 1

You're more than welcome to join us as a forum member Jase. Pop SAU on the form and get it over to us if you're keen :)

Hey Kat,

I will be entering my GTR in the club display. Can you please confirm the SAU NSW email address so I can send in my form

Jase

Edited by gts25



  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...