Jump to content
SAU Community

Recommended Posts

Not bad, much better than A1RM on the track but still gave up after 3 hard laps. Project Mu I would do about 5 laps before shit got hairy lol

Recently just bought Type D Intima pads, I'll tell you how they go after 30th May.

Wow 700C temp rating, higher than the A1RM. How do the SR go on the track?

My Intima SS's died on the hills, need some convincing to go back to Intima after that..

I have SRs. Great street pad. But I never use the brakes so I suppose I don't really test them!

  • 2 weeks later...

Not bad, much better than A1RM on the track but still gave up after 3 hard laps. Project Mu I would do about 5 laps before shit got hairy lol

Recently just bought Type D Intima pads, I'll tell you how they go after 30th May.

How do the pads "give up" after track laps??

How do the pads "give up" after track laps??

Sorry wasn't too clear, so what I mean say after 5 or so laps, the pads become ineffective at stopping the car also known as brake fade. Once everything cools down again by either doing a cool down lap or waiting for the next session then the brakes will be back to normal again until you've given them a pounding and they "give up" after x laps.

Sorry wasn't too clear, so what I mean say after 5 or so laps, the pads become ineffective at stopping the car also known as brake fade. Once everything cools down again by either doing a cool down lap or waiting for the next session then the brakes will be back to normal again until you've given them a pounding and they "give up" after x laps.

Brake fade is not the pads, that will be your brake fluid not able to handle the temp.

Brake fade is not the pads, that will be your brake fluid not able to handle the temp.

Fluid boiling is not brake fade. That's when the pedal goes to the floor and your lunch ends up in your pants.. Fade is where the pads exceed their working temperature and stop having a decent coefficient of friction.

That's pretty lucky then, because everyone else I personally know and race with all have used A1RM, all hate them, all have had brake fade, and half of them crumbled their pads.

I personally hate them, but I hate Bendix pads even more.

I agree, my A1RM's were shot after 3 laps or so of Phillip Island in the Stagea, but that is an 1800kg wagon with R34 Brembo's and 350kw.

Great pad for spirited road driving though, mine don't make any noise, and I have never had an issue on the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • 310mm rotors will be avilable from Australia, Japan, and probably a few other places. Nothing for the front can be put on the back.
    • The filter only filters down to a specific size. Add to that, the filter is AFTER the pump. So it means everything starts breaking your pump even if its being filtered out.
    • Just like in being 14mm too small (296mm) makes it not fit, being 14mm too big (324mm) it also won't fit. You want to find the correct rotor.
    • @GTSBoy Ok so that was the shops problem...they showed R33 rotors on R34 page and i did not know 296 do not fit(and are for R33) Yes i bought "kit" with rotors and pads. Pads are ok(i have GTT calipers front and rear). They have some 324mm but no 310mm. So i dont know if they would fit. I have 17inch LMGT4s So another question. Can i fit those in the rear or they are just "too" big for that?
    • I started removing the tank a while back with the intent to give it a proper clean. Got to a bolt that I couldn't undo completely due to a diff being in the way, so just said f**k it and siphoned the gluggy old fuel out and called it a day. Looking it the tank it looks less corroded than the one in the pics for that billet hanger from Frenchy's anyway. Isn't it the fuel filters job to worry about this stuff? I scraped off most the crusty shit of the hanger but will give it another go before reinstall coz maybe the fuel and return pipes are also full of gunk  
×
×
  • Create New...