Jump to content
SAU Community

If Airbags Are Deployed Does This Mean The Car's A Write Off? Low Km's Accident


Recommended Posts

Was involved in a 4 car pile up last weekend.

My pride and joy which was only imported two months ago from Japan was beat up pretty bad but the accident was under 20 km's as far as I can remember as it's all blurry after the airbags went off.

1997 R33 GTST Skyline 40th Anniversary model automatic Midnight Purple, only 98,000kms on the clock.

I want to know if my car a salvageable....

Front was pushed in just touching the front of the timing case.

Engine didn't spill oil and transmission also fine.

Bonnet bent, pretty much front end damaged.

Car was towed away. .....awaiting report from insurance company to be assessed.

Csn I get it assessed? As I believe that it's repairable...

Both passenger doors open fine.

No rear damage, just bonnet and front end.

I'd post photos if I could here but haven't figured out how to yet...post-74120-0-22206400-1464557931_thumb.jpgpost-74120-0-81008400-1464557959_thumb.jpgpost-74120-0-26437200-1464558020_thumb.jpg

Edited by mercyseat

you can get it assessed but it still up to the insurance company to if they write off.

rule of thumb is if repairs are more than 75% of insured value they write it off.

from that i can see needs

lights

fog lights

bumper

bonnet

rad support

prob radiator

prob fans

all the plastics like under tray inner liners

new steering wheel

new dash

new airbags

paint

labour

i would not be holding breath for them to fix, it is a 20 year old car and OEM parts are getting hard to get

I wasn't tailgating anyone.

It's in dispute as to the car in front slammed his brakes on first hitting two cars in front of him first.

It's insured for $10000 agreed value.

I'm hoping if they write it off of possibly buying back the salvage if it's considered a repairable write off. The car's immaculate pre accident, good resale for parts possibly, who knows.

Will decide after I hear back from the assessor's in a few day's.

Just didn't know what airbags cost to replace.

I thought the definition of tailgating was too close behind to stop if the other person hits brakes..

curious who is your insurance with?

if you buy it back getting it back on the road is an expensive process as it will be deemed a write off.

you need to show receipts for all parts and work done to get it back, go through inspections, and even then most insurance companies will have nothing to do with it.

Or track it.....

I thought the definition of tailgating was too close behind to stop if the other person hits brakes..

And what if the person in front comes to a stop from hitting vehicle in front of them abruptly and doesn't hit the brakes?

And what if the person in front comes to a stop from hitting vehicle in front of them abruptly and doesn't hit the brakes?

"Tailgating is the act of driving on a road too close to the vehicle in front, such that the a distance between the two vehicles, does not guarantee that stopping to avoid collision is possible."

It would still be considered tailgating, that is the whole point. You should allow enough time to both react and stop.

I reckon it will be fixed.

Mat from nistune hit a car that pulled out from a side road, damage looked very similar. That was fixed, and he had a front mount that was smooshed also, having said that it wasn't his fault so that might come into play.

Normally...

Front Car is not at fault unless they did something malicious or downright stupid...
Middle Car is at fault for hitting Front car.
Back car is at fault for hitting Middle car.


Quite often they'll ask the Front car if they felt 1 hit or 2 hits.
If 1 hit, the collision order was Back->Middle, then Middle was pushed into Front.
If 2 hits, the collision order was Middle->Front, then Back->Middle.

Either way, Back car is normally found at fault... the only difference is if the Middle Car is also considered at fault (aka. Did they stop in time)

I'm with a reputable insurer. There's no problems there.

As to who's fault, probably more than one person's fault but me being the last car will/have copped it. Still in shock from the damage done seemingly i actually stopped less than 100 metres prior to let the car i ran into , in front out of the side street. So from stop to accident within 100 metres is fairly unfortunate. As mentioned i blacked out and only remember the airbag going off in my face.

Was just too wet, people rubber necking the car broken down on the side lane...etc etc.

For me the car's sentimental more than money is worth. My last 1994 R33 was car jacked in Sydney back in 2004. So I'd waited over 10 years to buy another one. I'd only imported this car less than two months ago....pretty bummed out about the whole shit-suation.

Regardless I've lost $$ .

I doubt I'll buy another one knowing they're a write off at 20 km's once the airbags are deployed.

I'm with a reputable insurer. There's no problems there.

As to who's fault, probably more than one person's fault but me being the last car will/have copped it. Still in shock from the damage done seemingly i actually stopped less than 100 metres prior to let the car i ran into , in front out of the side street. So from stop to accident within 100 metres is fairly unfortunate. As mentioned i blacked out and only remember the airbag going off in my face.

Was just too wet, people rubber necking the car broken down on the side lane...etc etc.

For me the car's sentimental more than money is worth. My last 1994 R33 was car jacked in Sydney back in 2004. So I'd waited over 10 years to buy another one. I'd only imported this car less than two months ago....pretty bummed out about the whole shit-suation.

Regardless I've lost $$ .

I doubt I'll buy another one knowing they're a write off at 20 km's once the airbags are deployed.

Its just the reality of owning a 20yo car. Even when they are in top shape, insurance companies wont care and will write them off after small-ish accidents.

My car took a hit in the rear quarter panel, needed an arm and probably the rear quarter. Was insured for 30k and it was written off with Shannons.

I would say you are absolutely written off there.

IMG-20140601-00157.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...