Jump to content
SAU Community

Recommended Posts

Hello every one!

I recently bought a skyline gts-t rb25, and I need to replace the clutch because it is slipping. I have been trying to research but cannot decide what would be best for my needs.

I will only be driving on the road, and not track, and the car is not highly modded. I understand a puck or ceramic button type would not be suitable for this.
Therefore I would not like something with an extreme clamp pressure? what is the stock clutches clamp pressure ? what is high ? what is low ? is this the only thing that effects stiffness of the pedal?

Is it worth getting a "heavy duty" clutch? or will this be too stiff or cause unnecessary wear and tear ?

what is meant by stage, 1, 2 ,3 and 4 clutches ?

what are the pros/cons between single and multiple plate clutches? are they equal in difficulty to install ?

Also finally, I would like to ask, if the clutch has been slipping, how likely it is the flywheel may be damaged and need replacing?? (I know you can get it machined, I just mean cracked or scorched or whatever.)

I whole heartedly thank anyone who can help me with advice, or perhaps link me to some already on the internet.

xoxo

Link to comment
https://www.sau.com.au/forums/topic/465109-which-clutch-to-buy/
Share on other sites

Same clutch here. Glad to know yours is holding up fine at that level, hoping to nudge 350kw when I install my 30DET.

Same here. 4 years on NPC 10" single plate carbotic. 2 years on 300kw 25. 2 years on 340kw 25/30 and has done 6/7 drift days and thousands of street km.

Same here. 4 years on NPC 10" single plate carbotic. 2 years on 300kw 25. 2 years on 340kw 25/30 and has done 6/7 drift days and thousands of street km.

have done the cheeky 2nd gear clutch dump stationary too :)

have done the cheeky 2nd gear clutch dump stationary too :)

I have done more than my fair share of that too haha. Have dropped third on the spot with shitty old 215's as well haha. Decided I should cut that out because I really do like my gearbox

haha 2nd and 3rd are being being too gentle I do 4th stationary limiter drops nismo twin and box still live on haha

  • Like 1

Exedy Cushion Button :yes:

No

Mine failed after about 8 months with 250rwkw

NPC is much better. Never ever had a drama. Got it rebuilt when I put my new engine in but that was only to extend the life. Still looked great after 3 years

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...