Jump to content
SAU Community

Recommended Posts

  • 1 month later...

Specification:  

Engine:
*CP Pistons
*Bridgeway H-Beam rods
*JRSpec GTX3582R BB turbo
*Custom Twin Scroll exhaust manifold 3mm thick stainless steel tubes + HKS gasket
*Tial MV-S wastegate + water cooling
*HKS SS 264 8.7 cams
*Ported head + HKS springs + Cometic 1.5mm
*ARP head + rods studs
*King Racing bearings 
*Nitto oil pump*Intake manifold VeilSide + DBW BMW N62 + accelerator pedal 350z
*Emu standalone + MAC + BT + DBW
*Ross Tuffbond Harmonic balancer + Trigger KIT
*Delphi 1000cc injectors
*Billet fuel rail
*Tomei Type S fuel pressure regulator + Tomei gauge
*Walbro 450LPH HP fuel pump
*NGK BKR8EIX sparks
*Radiator 52mm
*Spal VA09-AP12/C-54A double fans
*ATS Triple Carbon Spec I clutch
*AEM 21-3059DK air filter
*Precision 600x270x95 intercooler
*HKS SSQV V1 blow off


Exhaust:
*Custom stainless steel 1.5" screamer pipe + stainless steel reinforced exhaust flex pipe
*Custom stainless steel 3" V-band downpipe + stainless steel reinforced exhaust flex pipe
*Two stainless steel V-band center sections + Magnaflow muffler [11249]
*HKS Priest back box

 
Suspension:
*MeisterR Zeta-R coilovers
*Polyurethane full bush kit front/rear suspension
*Galvanized bolts and nuts
*Cusco rear camber arms
*Japspeed front upper camber arms

 
 
Braking System:
*Brembo 6pot front calipers + 360x30 disc from IS-F
*Akebono 370z 2pot rear calipers + 350x20 disc from 370z
*Brake pump BM50
*Tilton brake valve
 

Exterior:
*Car painted in Jupiter Red from Mercedes AMG
*Volk Ce28 18x10.5j +22 [rear spacer 5mm + 15mm in front]
*Hankook Ventus S1 Evo3 265/35/18 tyres
*Kics R40 iCONIX wheel nuts
*Bixenon LHD
*Fender Washers
*Auto Select Devil Wing
*Nismo rear wing end covers
*Nismo clear front indicators
*Nismo clear side indicators
*OEM spats R33 GT-R V-Spec
*Carbon cooling panel
 
 
Interior:
*Indyvidual LHD velour mats
*Dashboard cuscom from s14 and r33
*R34 steering wheel + EVO3000 mod
*BMW M custom shift knob
*Black alcantara roof liner and sun visors
*S15 black rear view mirror, room lamp, map lamp + white led
*Cusco rear strut brace
*Kansai Service tower bar
*Defi Link Meter BF 60mm DF04301 + Control Unit II DF05002

 
Audio:
*Headunit 7" Android 9.0 Octa Core station
*Front speakers - Morel Dotech Ovation 6
*Amplifier Emphaser EA 4100-500
*Subwoofer Gladen SQX 12"
*Speaker cable - Prolink OFC PRO CAV1003
*Signal cable - Prolink Futura FTC101
*Soundproofing [bulkhead, dashboard, floor, roof, rear fenders, doors, c-pillar's, rear deck, trunk] - Dynamat SuperLite + foam GMS 3mm & 10mm
*Bosch S5 74aH
 

  • 4 months later...
  • 1 month later...
  • 3 weeks later...
  • 2 months later...
  • 9 months later...
  • 2 months later...
On 26/03/2021 at 12:31 PM, max albadi said:

i have a question ....how did you manage the fuel and trunk release cable when you convert to LHD?!

Damn I really don't remember, but a big chance trunk release cable and button is from 200sx.

  • 2 months later...
  • 2 years later...

Snara, you've used a 200SX S14 firewall for your LHD conversion. Can you list specific issues you ran into and parts list? Off the top of my head I can only think of a few items.

1. Did all the AC vent plumbing line up behind the dash and are functional? 

2. What steering rack did you use?

3. What brake booster/master cylinder are you using for the brakes?

4. What pedal assembly did you use (brake, clutch and throttle)

5. Wiring Harness for the gauge cluster from RHD to LHD, was the RHD cluster harness long enough to move over to LHD? Did you cut and extend wires?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Mine is all -12, I’m running a dry sump in a billet block though 
    • HG's high flow is not "bolt on". The core is shorter, moves the comp cover rearwards in the engine bay. means you have to deal with the inlet plumbing a little bit. This is probably something to consider with every "bolt on" turbo anyway.
    • HyperGear. Just get a high flow of the stocker. Good, reliable, and should bolt on. Yes it will want things like a retune once done, so you need to factor this in to your spend too.
    • Hi. Iam looking for some "cheaper" bolt on turbo on RB25DET NEO. I do not want "big" power just better reliability than the stock turbo which is "fot now" good but is old and i do not think it has "easy" life. One the Skyline here running some "temu" china Turbo but i dont trust those... Thanks!  
    • Hi guys, Making some space/cleaning up. A whole heap of random OEM R33 GTR parts and other random bits and bobs. I will update this thread as I go. Parts are located in Moorebank NSW 2170. Pickup preferred but will post at buyers expense. Prices are negotiable. If they don’t sell it will go in the bin. Item 1: BOV return pipe. $40 Item 2: RB26 cam gears. $20 Item 3: R33 GTR torque split, oil temp, boost centre gauge. $100 Item 4: RB26 fuel rail x 2. $20 each Item 5: RB26 Recirc valves. $50 Item 6: OEM upper front arms. $20 Item 7: Royal Purple Max Gear 75w-140 1 quart/946 ml x 5. $50 each or 5 for $200. Item 8: OS Giken 80w-250 diff oil 1 litre. $25 Item 9 Eibach springs. ers-11-140-60-0140. $100 https://www.streetfx.com.au/eib140-60-0060-eibach-ers-140mm-length-x-60mm-id-coil-over-spring?_ga_campaignid=22235933977&_ga_adgroupid=180146800292&_ga_keyword=&_ga_device=m&_ga_target=pla-295238231169&_ga_locint=&_ga_locphy=9071723&_ga_matchtype=&_ga_network=g&_ga_device=m&_ga_placement=&_gcl_id=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE&gad_source=1&gad_campaignid=22235933977&gbraid=0AAAAADPiTbo1xAuvnjIWWYnezivf-BUSY&gclid=CjwKCAjwlt7GBhAvEiwAKal0cvkVE_hstv24cDiaICsIk1oznH9zAoJf3By6vR3Tpe7jmByqM6JFHBoCZYAQAvD_BwE    
×
×
  • Create New...