Jump to content
SAU Community

Recommended Posts

Ok, here's the situation. A good friend of mine is buying a new car, that has had nearly every modification on the planet done to it. He has asked me my opinion of whether he should buy it or not, whilst i do appreciate it's a great car, i couldnt say that it's what i'd really recommend for him to do - or something i would do myself, as he's previously had 2 other fully completed cars which have gone bad for him (not that all completed cars go bad) and he's always wanted to start off fresh.

I dunno, i feel that building up a car, doing your own big or small modifications and little touches here and there is what makes it YOUR car? This certain car is soon to be in some magazines as the owner has basically completed the project, so i think allot of people will always look at it as so and so's car.

I myself have always bought stock (or as close as possible to stock) to build up to scratch, and basically never let a workshop touch mine unless it's serious tuning or something i have no idea about so i feel inclined to give my friend the opinion that is he should buy something closer to stock and build to represent himself as the car build up journey is always the most fun (well sometimes not!! haha).

I know that he does want to have a car that represents who he is, i do think he's a little scared of.. how should i put this... "driving a slow car to begin with" if you know what i mean, as he always seems to want to chop everything the easy way. Eg, buying a car with instant huge hp.

I do believe that my opinion will influence his decision to buy or what not, as he keeps asking me if he should do it or not, i don't want to be a prick friend and give my buyist advice.

What do you guys reckon?

p.s yes, i am bored at work haha.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/
Share on other sites

Its nice to build up your own car with mods, your own touch etc.. but its ALOT cheaper to buy one already done, plus less stress, but also less fun...

depends what he wants, to spend more money to build what he wants and learn along the way, or to just have a nice already built car to drive..

I love my car, but if i had the chance to go back, i'd be tempted to buy one that had been modded already, but with what i want.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948135
Share on other sites

I reckon it saves a lot of headaches, and in the long run, he'd be saving a HUGE amount of money.

If you add up the amount of money that it costs to do all the "fully sik" mods to a car, it comes to a small fortune.

If you buy a car that has already had everything done to it, there's no need to spend any more $$ on it.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948421
Share on other sites

why go through the "oh i wish it was faster" soon as you get it.. when if already modified it will be faster or handle better than other stock cars to begin with.. all it can go from there is even faster. Most of the "basics" are a little boring anyhow if you ask me (bleed valve, exhaust system, etc). You save a heap of money.

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948535
Share on other sites

Sorry, I dont respect a guy i know who bought a fully worked tx3.  

The guy couldnt even tell me how his boost controller worked or how to adjust his bov.

:) i think these guys are funny. I've enjoyed modding my own car, wouldn't have it any other way really.

-rb25

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948675
Share on other sites

The only problem I see in buying an already highly modded car is that it would have been driven hard. Why would the seller have done the mods in the firt place? To go faster.

If the seller is a good car respecting person (you would think so driving a modded car) and lets it warm up before caning it, uses good oils etc. Then I don't see a problem, unless possibly the seller knows that there is a major problem with the car that the buyer might not pick up.

I wouldn't really care if it is known as the other person's car, stick some different wheels on it, and hey presto it's now 'yours' :)

Link to comment
https://www.sau.com.au/forums/topic/46742-bought-not-built/#findComment-948827
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The oil pressure sensor for logging, does it happen to be the one that was slowly breaking out of the oil block? If it is,I would be ignoring your logs. You had a leak at the sensor which would mean it can't read accurately. It's a small hole at the sensor, and you had a small hole just before it, meaning you could have lost significant pressure reading.   As for brakes, if it's just fluid getting old, you won't necessarily end up with air sitting in the line. Bleed a shit tonne of fluid through so you effectively replace it and go again. Oh and, pay close attention to the pressure gauge while on track!
    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
×
×
  • Create New...