Jump to content
SAU Community

Recommended Posts

Pedestrian Safety Help

Hello!

Had to make an account because i have no idea how to tackle this situation i am in. I own a 370gt Coupe, 2009, and the other night i was driving around as i watched 2 kangaroos hop out infront of me and off to the side, but little did i know a 3rd kangaroo would jump into the side of my car!

This made a loud bang and the hood popped up (Pedestrian Safety System). No exterior damage, just the dirt off his body at the end of the drivers side door just before the wheel.

So im just wondering how to get the hood to retract back to its original position and to get rid of the warning light, unsure if i have to go to a Nissan dealer or if there is any other way.

Any help is appreciated.

Cheers,

Scott

Link to comment
https://www.sau.com.au/forums/topic/467534-pedestrian-safety-help/
Share on other sites

Unfortunately, those things are like airbags. It's a one-time deal. You need to replace them with new ones.

I'm contemplating unplugging mine and replacing them with little adapters that keep the BCM happy. May not be the legally appropriate thing to do but I don't have a heart to care enough.

You could always ask a dealer for a quote. As for the parts, if you can score them from a wrecked vehicle, you could be in luck but I wouldn't know the probability of that. In which case, grab the part number pertaining to your series and search for it on Google, particularly from Amayama, who seem to be a pretty good source for Jap parts. Failing that, your dealership's spare parts division would be the only other way.

Having recently resolved a problem with having to replace my rear seat, I've found the price from Amayama and the price from Steve Jarvin's spare parts division works out to be pretty much even. I'd rather pay a small percentage more with the local guys, if nothing else, to kick their arse if they got it wrong despite my best description and triple-checking with them.

Thanks for the reply Max! Amayama seems like a good site, thankyou for that!

I just took the car down to a private panel beater i know. He said he can attempt to get rid of the whole system and try to get the bonnet down. I would rather get rid of it rather then have it all setup again, because it is too much of an inconvenience and how often does one hit a pedestrian? Is this a Japanese safety law?

If all that fails, i believe i will head to the dealer. Fingers crossed the bonnet is flush and the system is gone!

Getting the struts out isn't the problem. It'll be the annoying error light in your dash that will piss you off because it's nagging at you that you have them both disconnected. That's where you need a couple of plugs which have little electronic modules within (which I have yet to see for myself and inspect) to fool the system into thinking they're plugged in and ready to go.

I believe this is becoming a standard feature worldwide. My European buddies tell me a lot more modern vehicles are made curvier and with all these fancy features in the interest of pedestrian safety, reducing the risk of them flying through your windscreen, etc. I can't say I agree with the practice but there you go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...