Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

Dug up some old data prior to the motor blowing up. Managed to crack the 200km/h barrier down the main straight of Wakefield Park - this back up the car was making some decent power till it spat ring lands (we all knew it was going to happen).

Machinist should be back soon from his last minute holiday and I'll get the crank back then it's party time (maybe). 

I have a track day I'm running with Yez Racing guys so would be nice to have the car running. Let's see!

Screenshot_20170719-213312.thumb.png.9f06d90ae0a44fef359361f181702eb0.png

  • Like 1
  • 1 month later...

3x months later I've gotten my crank back, what an adventure with that shop. Not to mention they decided to charge me more as well, what arseholes.

Anyhow that aside, I've gotten my cam covers powder coated black because stealth is best.

20170911_081606.thumb.jpg.b3ceb345af31d832b6d0be981b0aa7f3.jpg

 

  • Like 3
  • 3 weeks later...
  • 2 weeks later...
18 minutes ago, GTofuS-T said:

Size?

Are they much lighter?

Went yalla habibi spec, 18x9.5 +22. Has some homosex 245 wide tyres, once the car is running again OR when I decide to put a motor and gearbox into it I will get the guards cut/reshaped to allow 265 semis to fit under the guards and look stock. No gay stretch no gay camber.

And funny enough, the Rays 57S aka Gram Lights are indeed lighter than the OEM GT-R wheels.

 

15 minutes ago, admS15 said:

Much betterer

Thank you sir, need to make the car look good before it runs lol

  • Like 1

Pull your finger out and get cracking son. FYI, i have 18 x 9 +22 all round with 265/35. Fit good. Rear guards are rolled a bit, running -2 camber and front has unrolled +20mm fenders. With 265 on 9 inch there is about 5-7mm clearance to the upright.

  • 2 weeks later...

Decided the block should be painted black, so it got painted black.

Also the stock pistons were given a clean, looking good.

So I decided to get new rings, new ACL race bearings, new ARP rod bolts, new ARP 2000 mains, Spool crank collar, Spool Billet N1 oil pump gears installed and lastly the OEM water/oil heat exchanger was deleted. 

Motor is still stock lol.

Special thanks goes to Matt at Redsun Motorsport & Mechanical for dealing with my bullshit and also pointing out some cock ups with a previous shop that did my crank collar install.

20171022_191940.thumb.jpg.2fcb1a134fd251d8d55cf1f8239a6e15.jpg

  • Like 6

Spent part of Sunday going through my collection of nuts and bolts from last year. Not fun, also turns out the service manual doesn't tell you of bolt lengths to use lol.

Modified RWD pickup installed, one day this motor could go into a GTR lol.. 0.1L smaller but higher compression, has VCT, billet oil pump gears so it won't go bang! 

20171029_105641.thumb.jpg.7908d38818b4e073890bd7dcf5b5e13a.jpg

Installed water pump, ancillary bracket as well as the alternator. Whilst installing the water pump with gasket maker I then rummaged through the box and found a gasket for it lol.. too bad so sad.

Another hiccup was that the Stagea engine mount brackets/arms are no good in the R33 so will need to source RWD ones. Then as I was installing the knock sensors followed by the OEM oil pressure sensor - I realised the NEO uses a different one so derp.. need a R33 one.

20171029_123755.thumb.jpg.d012ed1b4bed6ffe8aa3d7c4c46fc2ac.jpg

  • Like 3
13 hours ago, ActionDan said:

Worth redoing the water pump or you confident in the gasket maker? 

 

Nissan manual advises to use gasket maker, so should be on point. 

I really hate putting it together.

I have never used anything but gasket maker. The gasket looks like a piece of a4 paper cut roughly into the shape of a dick anyway, would much prefer liquid gasket

  • Haha 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
    • Welcome mate. Any pics? Even with a DE I'd be well happy if I had that as a 1st car. 
×
×
  • Create New...