Jump to content
SAU Community

Recommended Posts

I can probably hook u up for dyno time but its in Wollongong lol.
Dyno dynamics 4wd dyno raised above ground so can be an issue if mega low front ends, but can ramp up if needed

  • Like 1
13 minutes ago, jcAUSER said:

I can probably hook u up for dyno time but its in Wollongong lol.
Dyno dynamics 4wd dyno raised above ground so can be an issue if mega low front ends, but can ramp up if needed

thanks Jase!

See how despo I get, car needs to be done for mid Nov but I'm going OS soon so leaves me with this weekend only

Time for a build update, so now moved onto the bathroom upstairs.

This build I've enlisted a builder as we only have 1x bathroom so efficiency is important and working on Johnny time isn't going to work out especially as we only have 1x shower in our house.

Tiles and all the shit have been purchased. 1.2m vanity wall hung, 20mm stone top for vanity. 30x60 Porcelain tiles for floor, 30x60 Ceramic for the walls and 10x30 ceramic for the feature wall (vertical brick pattern).

New toilet suite and all taps, fittings and shit. Next to get it built then tuned (taps adjusted lol).

Oh yeah lowered its mum.

20191027_114620.thumb.jpg.1381c9dc22aa32b85b5c2f1a9b2a2640.jpg

20191027_120149.thumb.jpg.a3997ef353df8b65833ecaaf03ef8c62.jpg

20191027_124622.thumb.jpg.7fd1115b015953506c49deff7e3061df.jpg

Oh no ! No cruising for you for a while cause your cash is going into your bathroom reno ! 

And the same for me as a alloy Holden 6 Duggan head has popped up on for sale for my other project !

 

A bit of mould on the beams, but nothing worth replacing as it's not structural.

Next, to re-jig the piping to suit the new shower and all.

Btw, I'm not doing the reno this time. Paying a builder and now heading to the airport to use a bathroom/shower overseas for a week lol.

20191030_151004.thumb.jpg.9e8148daf61d6f52184eda33daea2158.jpg

Made it to the land of Samsung and Korean Fried Chicken.

20191031_183452.thumb.jpg.c227504da73a68d95380e98b39a829af.jpg

Also, you're free to help yourself to the beer fridge here and drink as much and as little as you want.

Here's a breakfast beer 

20191101_081117.thumb.jpg.1b579e95be1b3038baae9949a24e70f8.jpg

And back to build thread, went off topic a bit.

IMG-20191101-WA0001.thumb.jpg.cdf1ea7ebdabd8a455ab9e1cd8d43d36.jpg

Going full copper tray this time, no more leaks, no more cracked water proofing. This bathroom will outlive me!

 

Hmmmm . . . . beer and chicken . . .served on what looks like news paper !

Now that takes me back to my childhood with the old fish and chip shop serving the fish and chips wrapped in the Sydney Morning Herald. . . nothing tasted better . . . than news ink with your chips !

Free beer you say, next time I'm peering in your bathroom window I'll knock on the window, or you can just leave a beer on the window sill.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

I'm waiting......

602284268_images(3).jpeg.ee511fac07884ae3b2acd23ac18ada81.jpeg

So good having the father in law sending updates.

Must say this guy is quick! Now 2x days for it to dry and Monday he's going to tile it's mum.

IMG-20191101-WA0036.thumb.jpg.3a5f1f300a3ba00b031aa15f986be21d.jpg

IMG-20191101-WA0037.thumb.jpg.30cb5ead45f6ebdd7a14322c2b741b35.jpg

2 hours ago, Shyboy said:

Coming up nicely ?

No waterproofing?!!

That's next, once the screed dries up!

Living on the edge here, no shaft speed sensors ???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...