Jump to content
SAU Community

Recommended Posts

19 hours ago, Dose Pipe Sutututu said:

Just measured it, it's 134mm. OEM requirements is about 143mm.

Looks like might need the Dayco 115847 instead.

Fuarking.

well, FWIW that is the size that the GKtech adapter is designed for (134-143). I was going to say I have one for half price but looks like they are on sale for $19 atm anyway. 

However, taking into account the feedback above on aftermarket couplings (I've got no experience with them, but surprised if they don't work out of the box) and I saw something about the Dayco coupling fouling on the GKTech adapter...it might be best just to go OEM

After all, we know you are keeping this car for 20 years and continuing to say how you want to sell it and buy the new BMW electric hover m2 instead.

  • Like 1

Thanks for the thought anyhow Duncan!

I will just return the fan clutch, I've already messaged the seller on eBay however no response.

Might just give it till about Tuesday and do an eBay return, then cry a little and order a brand new OEM unit.

3 hours ago, Piggaz said:

Sitting in the garage. More than welcome to see if it fits, was working fine only removed to suit dry sump setup.

F8F8F5C8-E25F-4010-B856-542E4CE5E794.jpeg

CFB3C2AF-8D20-4AA9-9203-41A0AA4269F3.jpeg

Might take you up on the offer on the fan hub fits.

Will do Google tonight, intensely lol.

If not 2x options, both equally costly.

1. New OEM hub

2. FFG shroud and 16" Spal fan.

 

5 hours ago, BK said:

Don't think so, part is 21U082-05U00 and they're f**king $800+ now !

It's "nearly" the same 21082-75T02

Wonder what the real difference is

24 minutes ago, Dose Pipe Sutututu said:

Might take you up on the offer on the fan hub fits.

Will do Google tonight, intensely lol.

If not 2x options, both equally costly.

1. New OEM hub

2. FFG shroud and 16" Spal fan.

 

Come get it and have a play. If it fits, great, if not return it or sell it for me. 🤣

15 hours ago, Piggaz said:

Come get it and have a play. If it fits, great, if not return it or sell it for me. 🤣

Any chance you can measure the overall height from the hub to the top side of the fan?

I feel that they're nearly the same, perhaps different height (GT-R being probably shorter than the GTS-t one, however I'm running essentially a Koyo radiator for a GT-R).

 

4 hours ago, Dose Pipe Sutututu said:

Any chance you can measure the overall height from the hub to the top side of the fan?

I feel that they're nearly the same, perhaps different height (GT-R being probably shorter than the GTS-t one, however I'm running essentially a Koyo radiator for a GT-R).

 

 

A191B6AC-3032-4EC6-90D9-0C2378752496.jpeg

A1BF0AA4-6AF7-48FF-8910-3A7290293D4D.jpeg

EB4849B2-0EA8-4BF0-8F17-BBB6BE997C7D.jpeg

50 minutes ago, Piggaz said:

 

A191B6AC-3032-4EC6-90D9-0C2378752496.jpeg

A1BF0AA4-6AF7-48FF-8910-3A7290293D4D.jpeg

EB4849B2-0EA8-4BF0-8F17-BBB6BE997C7D.jpeg

Hmm mean from the top side of the fan blade to the base of the clutch, ie if you sat the fan flat on a surface, how high would be be overall.

 

3 hours ago, Piggaz said:

100mm overall

95 for the height of the blades

919B4CF3-5112-4F42-BDA8-EF5F71EE6DD9.jpeg

6CDACD25-AB7F-4E81-A4F4-D604A667FDB1.jpeg

I'll grab it, just measured mine and seems about the same height 98mm or so.

Considering the fan blade is identical and the water pump on either motor are the same it should be good.

I'm going to assume you want to get rid of the clutch and fan blade together?

3 minutes ago, admS15 said:

I'm happy to purchase a fan blade if there's one surplus. Mine has started to get little stress cracks and could do with replacement. Just saying😉

Sounds like we a threesome in a non homosexual way.

  • Haha 1
3 hours ago, Dose Pipe Sutututu said:

I'll grab it, just measured mine and seems about the same height 98mm or so.

Considering the fan blade is identical and the water pump on either motor are the same it should be good.

I'm going to assume you want to get rid of the clutch and fan blade together?

Yeah clutch and fan together. Fan blades would be lucky to be 5000 kms old.

6 hours ago, Piggaz said:

Yeah clutch and fan together. Fan blades would be lucky to be 5000 kms old.

PM me your number bro, you can't receive PMs for some reason lol.

Thanks again @Piggaz, shit box now has a working fan clutch/hub/coupler

Weirdly enough the RB25 one is higher than the RB25, so this means the fan blade is now even closer to the radiator shroud!

I have a out 6mm before the blades kiss the top flat part of the shroud. Might trim off that flat part if it causes any issues.

 

PXL_20221220_102031577.thumb.jpg.5e964f7e053289e5bc676b3be74c8624.jpg

PXL_20221220_102421696.thumb.jpg.5c3487f66841b505bf4a176d6449e297.jpg

PXL_20221220_104438730.thumb.jpg.e2cfd87f33e948e08f81ae7e9633b0c3.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...