Jump to content
SAU Community

Recommended Posts

On 04/07/2025 at 9:21 AM, Duncan said:

nah, I'd heard the same, they are not doing well with heat management for track use; they are a street use only thing (sure high power, but not high power over a sustained period)

 

On 04/07/2025 at 9:33 AM, GTSBoy said:

I think that's true for a lot of new performance cars. Just have to watch them being lapped at the 'ring to see how many start squealing about engine or trans temp by the time they get to the climb out of Breidscheid.

Everyone I know with a90 supra at time attack aren't having issues with 3-5 fast laps so far and one is decent powered one too.
Saw a k24 swapped 86 with a 8hp70 and big slicks and aero which had no drama's at QR and Manton Park.

I've stuck a 25 row cooler in my setup with 8hp45/50 in the hopes of keeping the oil cool as I plan on some racing next year that 20-30min sessions. I've also geared my car so won't be using 7th and 8th gear too.

@Dose Pipe Sutututu just needs to get that samsonas in already and have that tassie guy fit a head and rev it too 11ty thousand rpm. 

  • Like 2

@robbo_rb180 I already have a NEO head on the shitbox 😎

Just needs beehive springs so I can rev it past the 8600 rpm limiter, then again pointless too, turbo is out of puff lol.

Wen da gods let me win lotto eh?

  • Like 1
1 hour ago, Dose Pipe Sutututu said:

@robbo_rb180 I already have a NEO head on the shitbox 😎

Just needs beehive springs so I can rev it past the 8600 rpm limiter, then again pointless too, turbo is out of puff lol.

Wen da gods let me win lotto eh?

After I win the lottos...
So sounds like Samsonas, valve springs, a new bigger turbo, and maybe a super charger like all the school kids are dreaming of for twin charging, and you'll have the perfect daily driver. :P
Oh, and maybe Bosch motorsport ABS for you too. :P

Don't think I even need a super charger to be honest.

Moving to a G35-900, would easily go over 500kW and also come on earlier.

Bosch Motorsport ABS would be amazing, and weld in proper side intrusion bars. I feel unsafe in the shit box on the street. Way too many numpties where I live, accidents daily.

I think I now dislike Century batteries and shall never buy another one.

2.5 years in and the battery on the VW shit box is toast. Barely could start the car, even after I gave it a good zap on the charger overnight. It has been getting weaker and weaker over the past 2 to 3 weeks.

Luckily, there's a 36 month warranty period. Brought it back to Supercheap Auto and they swapped it with a new one, the process took 5 minutes. So good!

PXL_20250711_000304822.thumb.jpg.6015f567f60f4c73f7d94afe4c944b76.jpg

Oh yeah, if you own or have owned a VAG shit box, standard shopping list of errors when you pop in a new battery 🤣

IMG-20250711-WA0002.thumb.jpeg.1925c4f88d130a5fef59676798dc0c4c.jpeg

IMG-20250711-WA0004.thumb.jpeg.8bdf6fe837091155e29d1a35ce8e06af.jpeg

And yes, I incremented the serial number to restart the charge strategy. Apparently the VW forum gods believe there is a timed battery charge strategy that reduces the charge with age so it doesn't speed the battery's deterioration over time. 

Screenshot_20250711-1033182.thumb.png.207e2eb868b776fc0b89c9ffa7e0c0a0.png

 

Other than that, Skyline still sucks.

 

6 minutes ago, No Crust Racing said:

Are you telling me I'm going to need a code reader etc to just change the battery when it dies... 

Why did I let you talk me into allowing Kate to buy this car lol

 

It's recommended, however I can assure you a good amount of people don't bother.

FWIW, the OEM battery lasted 4.5 years and I changed it prematurely too, I reckon could have stretched it to 5 years.

  • Like 1
2 hours ago, Dose Pipe Sutututu said:

I think I now dislike Century batteries and shall never buy another one.

2 hours ago, Dose Pipe Sutututu said:

It has been getting weaker and weaker over the past 2 to 3 weeks. 

PXL_20250711_000304822.thumb.jpg.6015f567f60f4c73f7d94afe4c944b76.jpg

Hmmm, what do you mean by getting weaker? And where did you get that test done?

I've been wondering about my battery because the cold starts crank super slowly. The voltage is fine. Not sure if cranking amps can be checked at home. Battery is 4+ years old.

36 minutes ago, soviet_merlin said:

Not sure if cranking amps can be checked at home.

Not properly. You need to be able to dissipate 100 amps or so to doing it meaningfully. You can do it indirectly by watching to see how far the voltage falls during cranking. Unplug the coils or something else to prevent it from starting so you can get a good couple or three chugs. It also helps if you have the multimeter set up reading before you start, and that it has max/min functions. So you can catch the real minimum without having to watch the screen, which often doesn't update fast enough to show the real max/min in dynamic situations. Or use a digital oscilloscope, which can be obtained for <<$100 from Aliexpress (although I'd argue for paying up to ~$200 for a nicer one).

A >4 yr old battery will very likely be well down the path to the knackery. Many only last 5-6 years these days.

The cold weather lately will definitely make it worse.

  • Thanks 1
46 minutes ago, soviet_merlin said:

Hmmm, what do you mean by getting weaker? And where did you get that test done?

I've been wondering about my battery because the cold starts crank super slowly. The voltage is fine. Not sure if cranking amps can be checked at home. Battery is 4+ years old.

how do you know voltage is fine? 

quick easy test is connect DMM up and put it on max/min mode, remove fuel pump fuse, crank car for 3-5s, go check min voltage

You'd be surprised how many "healthy" batteries are showing under 10v during this test in cold weather. 

  • Thanks 1
26 minutes ago, GTSBoy said:

Not properly. You need to be able to dissipate 100 amps or so to doing it meaningfully. You can do it indirectly by watching to see how far the voltage falls during cranking. 
...

A >4 yr old battery will very likely be well down the path to the knackery. Many only last 5-6 years these days.

The cold weather lately will definitely make it worse.

Thanks! Supercheap has a sale on this weekend so might be a good opportunity to get a new one. I do have a decent multimeter so I'll give it a try either way.
 

19 minutes ago, No Crust Racing said:

how do you know voltage is fine? 

quick easy test is connect DMM up and put it on max/min mode, remove fuel pump fuse, crank car for 3-5s, go check min voltage

You'd be surprised how many "healthy" batteries are showing under 10v during this test in cold weather. 

Hah, you got me! I do not. All I know is that the battery holds charge and sits at an okay level before I start the car. Doing the full charge and rejuvenation cycle on a trickle-charger seems to not really make a difference to the cold start behaviour. I'll try and measure it during cranking and see what it does. It's likely terrible; it certainly feels terrible. 


I'll be happy if it is really just the battery and I don't have to dick around with the alternator or starter motor.

56 minutes ago, No Crust Racing said:

how do you know voltage is fine? 

quick easy test is connect DMM up and put it on max/min mode, remove fuel pump fuse, crank car for 3-5s, go check min voltage

You'd be surprised how many "healthy" batteries are showing under 10v during this test in cold weather. 

I find most vehicles dip into the mid to high 9 volt range, even with a good battery.
Hitting the low 9s, and especially hitting into the 8s is pretty indicative of a dieing battery.

The other part to look at is the battery voltage after the battery has been fully charged. They should be sitting at 12.8V, as lead acids are dieing, they head down low and lower. Often getting as low as 12.0 - 12.2. You'll start seeing this when the engine is cranking over slowly.

Interestingly, depending on the vehicle, when batteries get really bad, you can see some REALLY funky things going on. From very low voltages, to higher than 16V too. Something I totally didn't expect! This part of the super low and super high voltages I've been seeing on motorbikes, I need to do some further studies on cars. I suspect cars will act a little bit different though for a couple of reasons.

2 minutes ago, MBS206 said:

I find most vehicles dip into the mid to high 9 volt range, even with a good battery.
Hitting the low 9s, and especially hitting into the 8s is pretty indicative of a dieing battery.

The other part to look at is the battery voltage after the battery has been fully charged. They should be sitting at 12.8V, as lead acids are dieing, they head down low and lower. Often getting as low as 12.0 - 12.2. You'll start seeing this when the engine is cranking over slowly.

Interestingly, depending on the vehicle, when batteries get really bad, you can see some REALLY funky things going on. From very low voltages, to higher than 16V too. Something I totally didn't expect! This part of the super low and super high voltages I've been seeing on motorbikes, I need to do some further studies on cars. I suspect cars will act a little bit different though for a couple of reasons.

Can't remember the last time I saw a good, healthy battery dropping into the 9s during cranking, 

Too many variables to say anything about it with any certainty though. 

A float voltage of 12-12.2 is tired AF and given how AGMs handle high C rate and DOD, will just die faster and faster with each cold start. 

 

2 hours ago, soviet_merlin said:

Hmmm, what do you mean by getting weaker? And where did you get that test done?

On cold start cranks, you can tell the starter motor isn't as "crisp" sounding.  Especially cars with stop/start "technology" (not really technology, it's garbage).

Test was done at Supercheap Auto, it's part of their warranty claim process.

 

2 hours ago, soviet_merlin said:

The voltage is fine.

Not often a good definitive test, as the battery may still show a "healthy" voltage - like mine, in the test you can see it's showing 12.41V

 

24 minutes ago, MBS206 said:

to higher than 16V too

I've seen this too, when you jump start a car with a completely fried battery, just as bad as when you disconnect the battery terminal on a running car and see the voltage spike LOL

  • Like 1
  • Thanks 1
18 minutes ago, No Crust Racing said:

Can't remember the last time I saw a good, healthy battery dropping into the 9s during cranking, 

Too many variables to say anything about it with any certainty though. 

A float voltage of 12-12.2 is tired AF and given how AGMs handle high C rate and DOD, will just die faster and faster with each cold start. 

 

I could probably pull a few logs out of the servers at work, would show it happening a lot.
My job is in vehicle telematics, and I spend more hours than I'd like in data analysis/review for various reasons. :(

3 minutes ago, Dose Pipe Sutututu said:

On cold start cranks, you can tell the starter motor isn't as "crisp" sounding.  Especially cars with stop/start "technology" (not really technology, it's garbage).

I've seen this too, when you jump start a car with a completely fried battery, just as bad as when you disconnect the battery terminal on a running car and see the voltage spike LOL

Not just stop start. New modern cars with their stupid "smart" alternators. Even funnier is watching cars when you drop them into eco mode. A lot of them don't crank the alternator up to full charge for very long at all. EVs and how they charge their 12V lead acid battery is even worse! :O

Also, you should never disconnect the battery, on a running car. The voltage spikes can break things. Basically while it's a "battery" it is also considered a "Capacitor" within the charging system, and helps to keep those spikes non existent. Yay for alternators being inductive. :)

  • Like 2
2 minutes ago, MBS206 said:

Also, you should never disconnect the battery, on a running car. The voltage spikes can break things. Basically while it's a "battery" it is also considered a "Capacitor" within the charging system, and helps to keep those spikes non existent. Yay for alternators being inductive. :)

Oh there's no way in hell I'm doing it to modern cars.

This was on some lancer shit box decades ago with silly gauges that started beeping when the voltage was outside of operating range

  • Like 1
  • Haha 1

Holy shit, I'm glad you brought up the battery issue and I'm glad I asked about measuring it.

Old battery was at a healthy 12.82V in the morning with the car turned off. Removed the fuel pump fuse, clamped the multimeter on at min/max/average and cranked for ~3 seconds. It dropped down to 8.30V. So yeah, not surprising it struggled that much.

Picked up a fresh battery from supercheap and it's ridiculous. Haven't done a cold start yet, but man, even with a warm start the difference is night and day. I can't believe I lived with this for so long. Just blamed it on it being an old modified car.

Went with Century because convenient. If they are shit it'll be a future me problem. But just in case I set up a reminder for 30 months - 8 weeks to check on the battery state and get a warranty replacement if necessary. 

  • Like 3
42 minutes ago, soviet_merlin said:

Holy shit, I'm glad you brought up the battery issue and I'm glad I asked about measuring it.

Old battery was at a healthy 12.82V in the morning with the car turned off. Removed the fuel pump fuse, clamped the multimeter on at min/max/average and cranked for ~3 seconds. It dropped down to 8.30V. So yeah, not surprising it struggled that much.

Picked up a fresh battery from supercheap and it's ridiculous. Haven't done a cold start yet, but man, even with a warm start the difference is night and day. I can't believe I lived with this for so long. Just blamed it on it being an old modified car.

Went with Century because convenient. If they are shit it'll be a future me problem. But just in case I set up a reminder for 30 months - 8 weeks to check on the battery state and get a warranty replacement if necessary. 

So many people don't notice it, as batteries decay slowly over time.
Two big reasons people end up noticing and needing to replace batteries:

1) The cold weather. The cold not only makes it harder to turn the engine for a few reasons, but it also increases the batteries internal resistance. So this means you need MORE power to turn a colder engine, AND the battery has a lower limit on how much current it can provide.

2) Something gets modified/altered/added in the wiring, typically an aftermarket accessory, like a dash camera, or an alarm etc, and this adds a small amount extra onto the battery, and pushes it over the edge in its failing days.

But if you hadn't have read this thread, and just pushed through, chances are you might have made it through this winter, just. But come next winter, it would have been kapoot. But the fact you changed it out now, means you've instantly noticed how much nicer it is for starting, and will be less worry for you that the engine won't start now.

  • Like 2

I guess it depends how much you use a car, but my #1 reason for killing lead acid batteries is not driving the car (charging the battery) often enough,. I've got sick enough of dying batteries that I've switched to AGM; they are much more expensive but deal better with cold weather and almost always recover from being dead flat, unlike lead acid ones

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
    • It was picked up on the MOT/Inspection that the offside front wheel bearing had excessive play along with the ball joint. It made sense to do both sides so I sourced a pair of spare IS200 hubs to do the swap. Unfortunately I don't have any photos of the strip down but here's a quick run down. On the back of the hub is a large circular dust cover, using a flat head screw driver and a mallet I prised it off. Underneath will reveal a 32mm hub nut (impact gun recommended). With the hub nut removed the ABS ring can be removed (I ended up using a magnetic pick up tool to help). Next up is to remove the stub axle, this was a little trickier due to limited tools. I tried a 3 leg puller but the gap between the hub and stub axle wasn't enough for the legs to get in and under. Next option was a lump hammer and someone pulling the stub axle at the same time. After a few heavy hits it released. The lower bearing race had seized itself onto the stub axle, which was fine because I was replacing them anyway. With the upper bearing race removed and the grease cleaned off they looked like this The left one looked pristine inside but gave us the most trouble. The right one had some surface rust but came apart in a single hit, figure that out?! I got a local garage to press the new wheel bearings in, reassemble was the opposite and didn't take long at all. Removing the hub itself was simple. Starting with removing the brake caliper, 2x 14mm bolts for the caliper slider and 2x 19mm? for the carrier > hub bolts. I used a cable tie to secure the caliper to the upper arm so it was out of the way, there's a 10mm bolt securing the ABS sensor on. With the brake disc removed from the hub next are the three castle nuts for the upper and lower ball joints and track rod end. Two of these had their own R clip and one split pin. A few hits with the hammer and they're released (I left the castle nuts on by a couple of turns), the track rod ends gave me the most grief and I may have nipped the boots (oops). Fitting is the reversal and is very quick and easy to do. The lower ball joints are held onto the hub by 2x 17mm bolts. The castle nut did increase in socket size to 22mm from memory (this may vary from supplier) The two front tyres weren't in great condition, so I had those replaced with some budget tyres for the time being. I'll be replacing the wheels and tyres in the future, this was to get me on the road without the worry of the police hassling me.
    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
×
×
  • Create New...