Jump to content
SAU Community

Recommended Posts

5 hours ago, vxsr33 said:

The rs3s also dont make a lot of road noise which is good.

Hardsteppa, i will check out the RSRR next time i need a new set of tyres. Thanks

I'd go a ride in a car with RSR/RSRR before deciding, from all I've read they're cheap and stick well but very noisy. Some have compared the noise to the KU36, which I run, and that's certainly a noisy tyre.

RS3's are meant to have a good balance between price/grip/wear/noise.

i run RSR on the GTR and would never complain about road noise... They have a slight hum but you don't really notice it after a while. And that is even with a relatively quiet exhaust. 

  • 1 month later...

it is indeed.

had Rs3's for a few months and yeah they're not bad, but...ad08r's now on all four wheels and wow..I can honestly say, never experienced anything like it. Best tyre I've ever used.

I've had ad08r on my car for a while now. Done a few track days on them and driven daily, they still have 85% + tread and grip the same as when new. Compared to cheap motorsport Street tyres, rsr, 123s etc. These actually last and it will be a long time before you see their performance drop off. Easily the best road tyre I have used that can handle and work well on the track (never used rs3 to compare though). I've recently been using A050 semis for my last 2 track days and have only managed to go 1 second quicker. If I don't end up going at least another sec quicker, I'll be going back to ad08r.

  • Like 1
3 hours ago, -S- said:

Can anyone comment on re71r ? Will these tyres be a waste if used for street only? I think these are on par with the ad08r ?

The new re71r's are amazing.  I was strongly debating mounting a set but a great deal came up that I couldn't pass on.  They are hugely popular in auto cross in the states.  If you drive spiritedly, you would enjoy the extra grip but I doubt you would get anywhere close to their limit on the street.  I haven't even hit the limit on my 003's.  In the end, they're one of the best street tires you're going to find, but to determine if they are worth it to you would be dependent on your driving style.

I initially wanted re003 as i think the re003 would last longer than the re71r... plus maybe the re003 would be better on the wet too compared to the re71r... then again i think the tread wear rating for both are 200 and 210 respectively so not much difference. (I could be wrong) but thanks for the feedback! Might really look into it. ..

 

2 hours ago, -S- said:

I initially wanted re003 as i think the re003 would last longer than the re71r... plus maybe the re003 would be better on the wet too compared to the re71r... then again i think the tread wear rating for both are 200 and 210 respectively so not much difference. (I could be wrong) but thanks for the feedback! Might really look into it. ..

If the RE71R is a rave-worthy tyre, then the RE003 is a long way from that.  I put them on my car.  Previously having used AD08Rs and before that various KU36s etc.  The RE003 has nowhere near as much dry grip as the AD08R, so should be at least as far behind the RE71R.  The RE003 is pretty good in the wet, no argument.  The life expectancy looks to be pretty reasonable.  I'm going to get a lot more life out of them than the AD08Rs, which is the main reason I decided to try them.

FWIW, I'd probably use the RE003 again, even with lower grip levels.  They're still a pretty good tyre.

ok i'm revising my vote. AD08's are great, and hopefully they should last a while, but, RSRR's are the best (grippiest dry, and I also found them fine in the wet)  tyre I've used. Don't last long, but, don't cost that much either.

  • Like 1

Don't slap me around here but I'm running NS2R's by Nankang.

Semi Slicks very good in the dry and in the wet I had traction in 1st my old Bridgestone R002's didn't.

Not saying the best tyre but pretty good so far.

Have 1000km on them but that's first review.

 

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...