Jump to content
SAU Community

Recommended Posts

Careful guys, NSW Police have added some real firepower to the Highway Patrol squad.

Volvos.

Yep. 

Volvos.

091e4a7ed94a3106234fdaf1d80fe837

 

http://www.news.com.au/national/nsw-act/volvo-xc60-joins-nsw-police-highway-patrol-ranks/news-story/49399f5932c4c48ad9d4307fe4970c61

How do you feel about being pulled over by one of these? 

I'm surprised that Maria hasn't been pinged yet in this.

Terry-4_zps90b15608.jpg

 

Terry-15_zps5d6cddc7.jpg

 

Terry-12_zps0087aaa4.jpg

 

160132695_zpsff272c0f.jpg

 

On pickup, we haggled for a major service to have been done. The service manager said that the number of faults that they had to address between Volvo and the other brand they sell, was at a ratio of 1 to 7. 

  • Like 1

And its been good since you had it, Terry?

 

BTW, this drove past me in Pyrmont today. Sydney is competing with Dubai for crazy cop cars.

 

articleLeadwide-the-nsw-police-have-adde

 

Yes, the XC60 has been free of faults/claims for 3 years now. We did take out an extended Volvo Wty at the time of sale. Lots of poke - and it can corner without getting majorly unsettled.

 

12 hours ago, niZmO_Man said:

Also, the Volvos know how to crash safely :P
 

 

 

If my wife ever gets hostile with me, I'll swap her XC60 T6 for a new Mustang. :P

 

  • Like 1

To be honest not that I like to be pulled over. Sad to say no more being pulled over by an Australian built car. Fact: Australia per capita built the best cars in the world. Now only to be seen in wheelbase of Mustang(Falcon) and camaro (commodore)

Best cars in the world? They're battleaxes but they're hardly best value. Come on, for the money you paid on a BA back in the day, you'd get a rice burner with a way better interior and one that wouldn't fall apart after ten years.

Aussie cars failed in overall quality of construction since they had to compete against the Japanese and Koreans. Why? Because our expensive labourforce drove them to cut costs in materials.

We've always been capable of producing quality vehicles that could take a beating. We just lost sight of that since the late 90s/early 2000s and frankly, I'm surprised the car industry lasted here as long as it did.

  • Like 1

As police cars went they were an Australian export regarded as the most advanced police cars in the world. Our labour force cost can be blamed on one particular government department. OH&S

  • 2 weeks later...
READ PROPERLY: As I said per capita. Remember only 25million in this country.


While our population influences the size of our market, I fail to see how a per capita view has any bearing on what defines the best car. We either build the best vehicles as a nation or we don't.

I would've thought "per capita" is used to represent a proportion of the population in whatever category that applies to an actual person, not an object's quality.

Happy to hear your take on this though.

I do agree about OH&S driving the labour costs up bit that's only one factor. There's also the unions, cost of living, just to name a couple. I'm sure there's more that I'm missing but my argument still stands. Quality suffered since the mid-90s and it only got worse from there. Best cars in the world? No chance.
  • Like 1

I don't see why they need such high powered vehicles when they're not allowed to chase after a certain speed. This, the C63's etc.. pointless..

Edited by Gymkhana

It's more about the acceleration and braking. Particularly the braking, where many a test vehicle have failed NSW's stringent criteria.

Besides which, if you believe cops adhere to the 160km/h pursuit rule (at least in NSW), trust me, they don't and I've seen that for myself. I won't explain how.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...