Jump to content
SAU Community

Recommended Posts

17 hours ago, Spec-s Gttt said:

Call this guys up dude they pretty good tune cars and mods speak to sam

From what you've posted appears to be a graphics mob, a car audio installer and a panelbeater? Where does tuning fit into it?

1 hour ago, AC34GTT said:

Anyone have experience with Race Pace in Bayswater?

Yes, a forum favourite. Did fantastic work installing some tricky mods and tuning my GTS-T with a very safe and "factory" feeling tune - would happily re-use.

I've nothing but good things to say about Racepace. Although, I will admit they aren't the cheapest around, but at least you know it will be done right the first time. (In my experience).

16 hours ago, Birds said:

Yes, a forum favourite. Did fantastic work installing some tricky mods and tuning my GTS-T with a very safe and "factory" feeling tune - would happily re-use.

 

16 hours ago, Steve85 said:

I've nothing but good things to say about Racepace. Although, I will admit they aren't the cheapest around, but at least you know it will be done right the first time. (In my experience).

 

Good to know! Now I've gotta decide between Racepace and Chequered!

  • 2 weeks later...
On 05/06/2017 at 3:55 PM, AC34GTT said:

I've heard nothing but good things about Chequered Tuning. But they are an hour each way from where I live...

 

May I ask what work you had done at Chasers? Just tuning?

Car was stock originally - They installed power fc, PFC boost controller, injectors, fuel pump, and high flow, then tune. 

  • 4 weeks later...

Finally got my r33 gtst tuned at chequered.
Car made 258rwkw at 17-18 psi peaking to around 20psi in the midrange.
Hks gtrs turbo, blitz return flow cooler, good 3 inch exhaust, 1000cc xpurts and other supporting mods.
Car now makes full boost at 3500rpm in comparison to full boost at 5000rpm it made with the OP6 hypergear highflow at chasers.

  • Like 1
  • 3 weeks later...
On 6/8/2017 at 9:44 PM, vxsr33 said:

Personally I've been to chasers for a tune and i wasn't too happy with the outcome. At the time i had a hypergear g3 r34 highflow turbo on my r33 gtst, blitz return flow cooler, full exhaust and all supporting mods.

I was happy with the power of 250rwkw at 16psi, what i wasn't happy with was the fact the car was making full boost at 5000rpm.
When i saw the dyno sheet i had a chat to paul the tuner about why it was so laggy and he basically just told me it's the turbo and he can't do anything about it.

Even though i had a return flow cooler, exhaust was a bit restrictive (wasn't too bad though) and the bigger turbo i don't think i should have been reaching full boost no where near that late. I wasn't happy to not get any suggestions or solutions other than to get another turbo.

Not trying to bag chasers out or anything just sharing my experience, heaps of other people have been very happy with their service. Other than that the car felt way smoother to drive, idled perfectly, cold start was perfect aswell.

Imo if you have a hypergear turbo go to chequered since they deal with hypergear all the time.

Can't blame the tuner if you bought a shit turbo and have a less than healthy engine. 

On 8/3/2017 at 1:22 PM, vxsr33 said:

Finally got my r33 gtst tuned at chequered.
Car made 258rwkw at 17-18 psi peaking to around 20psi in the midrange.
Hks gtrs turbo, blitz return flow cooler, good 3 inch exhaust, 1000cc xpurts and other supporting mods.
Car now makes full boost at 3500rpm in comparison to full boost at 5000rpm it made with the OP6 hypergear highflow at chasers.

Much better choice of turbo!

Sounds like the tune was fine on the previous setup but the slightly tired old RB25 is letting you down a bit. As long as it drives good power is irrelevant.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...