Jump to content
SAU Community

Recommended Posts

Running oil temperature in turbo Skylines/Stageas?

Hi,

Has anyone got an oil temperature gauge in their Skyline/Stagea, eg GTT. GTR etc?

Whats your normal running temperature?

I just installed an R32 GTR triple gauge cluster in my RB25DET NEO Stagea. The oil temp gauge goes from 70-150 deg C.

My engine already had an oil temp sender.

Cheers,

Brendan

Same as above, 85' C.  But on a stinking hot day +45'C you can see 100-120'C and then its time to slow down or stop.  But it has to be hot, bushfire weather tar melting hot.

I went to Albury on the Hume Highway when the big bushfires were in Vic, it was 48'C and the car was way too hot so I was sitting on like 90km/h in a 110 zone.  I had a HP come up and tailgate me for 20km or more.  But coming into Holbrook a car coming the other way caught his attention, he did a U turn and was gone....only time I was glad it was so hot that I had slowed down :).

2 minutes ago, tridentt150v said:

Same as above, 85' C.  But on a stinking hot day +45'C you can see 100-120'C and then its time to slow down or stop.  But it has to be hot, bushfire weather tar melting hot.

I went to Albury on the Hume Highway when the big bushfires were in Vic, it was 48'C and the car was way too hot so I was sitting on like 90km/h in a 110 zone.  I had a HP come up and tailgate me for 20km or more.  But coming into Holbrook a car coming the other way caught his attention, he did a U turn and was gone....only time I was glad it was so hot that I had slowed down :).

Sorry to go off topic but we never see those kinds of temps here. Does the aircond cope to make the car bearable inside?

It nearly did....I had it going [to survive], but it cut out twice once near Holbrook and as we came into Albury,  Then is was down windows, grin and bear it - any breeze was better than none.  I had it on full blast and it only just cooled the cabin so was expecting it to cut out at some stage.  It is the only time it has done it though.

I was glad I was only travelling 200km that day...going to a 21st.

And long story short but worked fine going home that night until I pulled up for fuel at Tarcutta, then the car battery decided to die [age and heat related].  2am and the servo had no jumper leads.  The guy behind the counter was good though, came out and we push started it with the missus in the drivers seat.  Thankfully only really needed a bump and it caught.  Made sure I didn't stall it and got home by 3am.

 

I always wondered if the aircon would have been OK if the car was standard.  Bigger turbo and FMIC etc creates heat that affects the aircon system???

Thanks guys, Yeah I was just checking my gauge was working right. It seems about right. Takes a while to start moving eg less then 70deg.
.

On 8/20/2017 at 6:19 PM, KiwiRS4T said:

Synthetic oil will withstand higher temps but anything over 120 deg C is getting a bit hot. If its on the street you have a big problem. What is your water temp?

Not sure on water temp degrees, goes about halfway on the water temp gauge when once warmed up and running. It is overdue for a radiator flush.

 

23 hours ago, GeeDog said:

Do you mean that the reading actually goes from 70 to 150 deg, or that the gauge is capable of reading from 70 to 150 deg?

The gauge is capable of displaying 70-150 deg. The car seems to run between 85-90 once warmed up and running.

Ive been trying not to give it too much gas atm because its been doing weird turbo noises when fanging it (I'll have to look into this issue). So I haven't seen the max oil temp reading.

 

 

 

 

31 minutes ago, QLDR31 said:

The gauge is capable of displaying 70-150 deg. The car seems to run between 85-90 once warmed up and running.

Your original post sort of indicated that your oil temp was fluctuating between 70 & 150

My R34GTt auto is completely standard and has approximately 100,000 klms on it. The oil temperature generally ran about 90°C. or a little higher, when driving under light load when the ambient temperature was mild. As it has an oil cooler which uses the engine coolant to cool the oil, the oil temperature will always be above the coolant temperature. Generally this means the oil temperature will be at least 10°C. hotter than the coolant temperature. From my experience, driving through hilly terrain will send the oil temperature to around 100°C. or more. My air-conditioning has also cut out in stop start traffic with temperatures in the high 30s. Cruising at 110klm/hr. with air-conditioning on, in the high 30s, coolant temperature was noticeably higher than normal. I believe the air flow through the radiator is restricted due to the small aperture in the grill. What I did to correct the high running temperatures, was to fit a new viscous fan hub. So far, this has improved the temperature situation noticeably. The only disadvantage, is significantly more fan noise.

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...