Jump to content
SAU Community

Recommended Posts

Home Built Z 'Full video build'

Hey guys,

I have not been an active member here for quite a long time, but I have owned a bunch of Turbo Nissan's over the years, including my R33 which featured in HPI magazine many years ago now. 

I was out of the game for a while doing the sensible adult thing, but now I have finally come back to what I love, cars. I know this is not technically a Skyline, so if I am no longer welcome I understand. I have always had a thing for the 240Z's, and around 12 months ago I found a very clean (and stupidly expensive) 240. 

This week I have finally been able to start work on it. I bought it as someone else's project, that they tore apart, but never got around to doing much beyond that. I saw a diamond in the rough, as it was a complete car (well all the bits are there) and it has almost zero rust. I know lots think that, but the shell is amazingly clean.
 
I have been working on another project, a '73 Porsche 911 RSR inspired build, for a while now and documenting it all in my YouTube channel. I have reached a stopping point as I am waiting for custom engine parts, so this means it is time for the Z. I first needed to replace the front wheel bearings on the 911 so I could put wheels on it and move it out of the way. I then got into doing a stocktake on my Z to see what it needed, and start formulating a plan for the build.
 
Here is the episode.
 
 
 
  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/472059-home-built-z-full-video-build/
Share on other sites

7 minutes ago, Robzilla32 said:

Looks like an awesome project. I think you will find there is plenty of Z car love on this forum so keep the episodes coming.

Thanks mate. There is something about the classic cars that is cool. This car, the way I plan on building it at least, will never be considered fast, but it will sound great and be that kind of classic cool.

Nice! This looks great!

On 18/09/2017 at 11:32 AM, Home Built By Jeff said:

I know this is not technically a Skyline, so if I am no longer welcome I understand.

Bah! Everybody is welcome! :welcome: 

  • Like 1
20 hours ago, PranK said:

Nice! This looks great!

Bah! Everybody is welcome! :welcome: 

Thanks mate.

This week I have a go at making a stud puller to do some dent repairs and I pull the engine out of the car.
 
 
Edited by Home Built By Jeff
1 hour ago, Home Built By Jeff said:
This week I stripped down my P90a head to see what I am working with. I also tackled my most difficult rust repairs to date.
 

I liked the music in that one!

  • Like 1
2 hours ago, Home Built By Jeff said:

Thanks guys. 

That has been set aside while I am waiting on all of mu custom engine parts for the US. As soon as I get them I will get back onto it and finish it up.

All good looks like a heap of videos to catch up on until then

  • Like 1
Are my 240Z's doors completely rusted out and junk? They have been covered up with a mountain of bog and paint, so this week I strip them down and see if I can save them.
 
Edited by Home Built By Jeff
  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...