Jump to content
SAU Community

Recommended Posts

With all this lock down stuff I have gotten into the sil80 and gone through parts to sell.
Fixed the leaking fuel lines at the fuel tank & drained the stale fuel. Updated firmware on ecu as it was late 2018 firmware.
Removed front & rear lca and knuckles from the car. Pulled out spare frame and degreased & pressure washed away all the muck.
1475838394_IMG_20200408_1025321.thumb.jpg.785c43c4d4dd18130affee6dbb72ce7d.jpg
1172855662_IMG_20200408_1025541.thumb.jpg.758c9db98cee4c63039aea22542ad7a7.jpg

I went and bought a small press and removed all the ball joints and the bushes I could
1785603003_IMG_20200408_1026021.thumb.jpg.5b474c6ad86ac379ff365af42628a549.jpg

Also started sand blasting the Brembo calipers ready for powdercoating & rebuild
527818479_IMG_20200408_1026271.thumb.jpg.b6e0193df7c8edee3f97d5303b033dd9.jpg

Got the gktech weld in plates for castor brackets & rear subrame to be done before being powder coated.
Debating wether to buy new MCA coilovers for this or put the old ones back in and buy new ones for the race car.

  • Like 1
7 minutes ago, Dose Pipe Sutututu said:

Nice work, on my to-do list as well from 7 years ago - still haven't gotten to it lol

it totally changes how they drive, never know it may make your barge almost handle like a BMW :rofl2:
Last time I did it with an energy suspension urethane kit(still going good in the race car), will get the whiteline rubber stuff this time for street car comfort.

1 minute ago, Dose Pipe Sutututu said:

You may be correct with this one - but motivation is gone lol

Once this virus stuff calms down a track day with get you motivated

  • 2 months later...

So.............
Got bored of working on the sil80 and had the need to just go drive a car with a few modern features.  Set a budget, made lists of minimum requirements, lots of car review videos and scoured the internets for a deal.
Jumped on a plane and did a road trip
 2090359320_IMG_20200619_1414301.thumb.jpg.5fffa450200a341d3b896c20e8461ca7.jpg

Plan is just to drive it while I tinker with the projects and the warranty runs out.
Remembered I bought a key chain while at the Nismo Factory last year
324936599_IMG_20200628_1716461.thumb.jpg.e8277304c637888ac2efdb2e612eff5f.jpg

Got to now get stuck into the sil80 as need to move it out the house garage.
Got a heap of parts sitting here from GKTech & Whiteline so plan this week is to weld in some plates & paint suspension arms and Brembo's. Next week install the bushes and brakes to get back on the ground.

  • Like 1

I'v looked at those as a cheap weekender a few times, keen to hear what you think of it.

Man/Auto? 

I see around the interwebs people are able to get 230-240rwkw+ out of them, but I have a hard time wrapping my head around 240rwkw from an NA v6 with exhaust/intake and a tune. 

  • Like 1
41 minutes ago, ActionDan said:

I'v looked at those as a cheap weekender a few times, keen to hear what you think of it.

Man/Auto? 

I see around the interwebs people are able to get 230-240rwkw+ out of them, but I have a hard time wrapping my head around 240rwkw from an NA v6 with exhaust/intake and a tune. 

with 11:1 CR, Wiki says it's 261kW from factory (i'm guessing at the flywheel) so seems reasonable

  • Like 1

Is that a nismo spc or something? I thought a standard 370 was like 245kw at the fly? 

245 at the fly plus what, like 30kw for a full exhaust, intake and a tune? I guess that could yield 240rwkw if it's only losing 10-12% through the drivetrain. 

I think Rob needs to do all the mods and tell us how it goes ;)


 

  • Haha 1
4 minutes ago, ActionDan said:

Is that a nismo spc or something? I thought a standard 370 was like 245kw at the fly? 

appears to be:

he NISMO version was introduced for the 2009 model year. The engine produces 350 hp (355 PS; 261 kW) at 7,400 rpm and 276 lb⋅ft (374 N⋅m) of torque at 5,200 rpm with revised ECU settings and exhaust setup.

2 hours ago, ActionDan said:

Did I miss that Rob bought the Nismo edition and I've been talking about regular pleb spc this whole time... 

You didn't look at the pic he posted? also it says it in his name/title card thing over there <<<<<<<<<

  • Like 1

To me it's just a white 370 with some red bits? I don't know enough about 370s to pick it from a side shot. 

No,  didn't review his profile card thingo either. 

But now I know that Rob is a big time baller spending large on Nismo spec stuff. 

I'll just be over here with my cheapo Silvia being a bum ;)

Edited by ActionDan
  • Haha 3
3 hours ago, ActionDan said:

Did I miss that Rob bought the Nismo edition and I've been talking about regular pleb spc this whole time... 

 

 

1 hour ago, ActionDan said:

To me it's just a white 370 with some red bits? I don't know enough about 370s to pick it from a side shot. 

No,  didn't review his profile card thingo either. 

But now I know that Rob is a big time baller spending large on Nismo spec stuff. 

I'll just be over here with my cheapo Silvia being a bum ;)

 

3 hours ago, GTofuS-T said:

with 11:1 CR, Wiki says it's 261kW from factory (i'm guessing at the flywheel) so seems reasonable

 

3 hours ago, ActionDan said:

Is that a nismo spc or something? I thought a standard 370 was like 245kw at the fly? 

245 at the fly plus what, like 30kw for a full exhaust, intake and a tune? I guess that could yield 240rwkw if it's only losing 10-12% through the drivetrain. 

I think Rob needs to do all the mods and tell us how it goes ;)


 

Yeah went full baller and got the nismo as its got a few nicer bits on it and by the time I bought a 2016-2018 sport & added a few bits it was around the same money.  Got the 7 speed auto as over daily driving manual.

Nissan says 245kw but with in my experience headers, exhaust & tune gets around 220-230ish at the wheels. Driven a few 350/370 with stillen superchargers & twin 2860s (350-440kw) and they are amazing, lots of down low torque & still nice for daily driving. For what I am doing with it (Daily/weekend club track day like my old S14), its great the way it is. 

Once its out of warranty (2024) may look at more power but I've still got the all the cheap S chassis stuff to work on and do silly things with?
 

  • Like 1
3 minutes ago, ActionDan said:

Sweet, onboard video of accelerating and some noise needed. 

Going up to Cairns in a few weeks to recce Targa course so will take the gopro. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...