Jump to content
SAU Community

Recommended Posts

Hi guys,

I took my R33 to be tuned. The Tuner didn't end up tuning to a suspect headgasket leak after overheating.

He said it pressurised the overflow bottle with coolant and has a constant stream of bubbles when trying to bleed the cooling system.

I tried to bleed the cooling system myself and there are some bubbles after 500km of driving it so no air should be present especially after a fair few heat cycles. But not a constant stream maybe a couple bubbles every minute or so.

Does this sound like blown headgasket?

If so, can I get away with resurfacing the head, putting a MLS headgasket on and ARP headstuds?

Can anyone confirm if you can take head off without taking cams out and reinstall it with cams in and fit the arp head bolts in?

Can someone link me to an engine manual I can either buy or download?

Much appreciated, can't wait to get car back on road. 

Thank you.

Id be using a stock headgasket as they have more tolerance to the mating surfaces..
Yeah 100% agree with this. There are usually pretty specific roughness ratings required for a good seal on an MLS.

Dont just assume that MLS are always better. Std gasket will be fine by the sounds of what you are after. If you build an engine from the ground up, thats the time to think about MLS.

ARP head studs are a better idea.

On 10/15/2017 at 7:31 AM, 89CAL said:

Yeah 100% agree with this. There are usually pretty specific roughness ratings required for a good seal on an MLS.

Dont just assume that MLS are always better. Std gasket will be fine by the sounds of what you are after. If you build an engine from the ground up, thats the time to think about MLS.

ARP head studs are a better idea.
 

 

On 10/13/2017 at 5:25 AM, AngryRB said:

Id be using a stock headgasket as they have more tolerance to the mating surfaces..

I agree with this, however the tuner recommended a MLS headgasket and has already placed the order so I am stuck with going with it now.

Ended up pulling the head off, did have a minor leak in the gasket incase anyone reading this in the future. Horrible job to get the head off not fun at all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Order for the 2025 model R35 GT-R were accepted from 3rd March and 26th August the last order rolled off the production line at the Tochigi plant. Concerning the R35 GT-R replacement, current Nissan CEO Ivan Espinosa said "Nothing has been decided about the GT-R at this time, but we are well aware that everyone is waiting. The GT-R will evolve and reappear in the future. Please be patient until that day comes." Nissan has a lot of issues with management and finances so take Espinosa's words with a big grain of salt. From what discussions I've had and read about here in Japan, not a lot of people are confident about Nissan's future, let alone the next GT-R. 
    • Thanks. We getting some parts along too so he will be solving the speed issue like next week so i will let you know what he came up with.   
    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
×
×
  • Create New...