Jump to content
SAU Community

Recommended Posts

  • 2 months later...
  • 3 weeks later...

Thanks my dudes. 

Going to get the paint finally sorted in a few weeks, unfortunately I was struck with the old "Low hanging exhaust", so I need to get myself a Tig to remake it, not the worst thing in the world. 

On 6/30/2018 at 7:04 PM, Callum14 said:

let’s be real no one really cares. 

Come on, no need to be like that. People are subscribed to this thread (myself included) which says the exact opposite! 

  • 2 weeks later...

Listen to somebody who has spent more money on cars than you could ever dream of. The car you have will be everything you want it to be if you just stick to it. They are a great chassis and the suspension is ahead of most cars from early 2000 so the only difference between your car and and a truly fast, safe car is the components that make them that way. Get good suspension, tyres, brakes but most of all read everything on these forums and do it right. Oh, and power of course but only if the engine is up to it. About 270 to 300rwkw is where most people would be happy. If you are young, then now is the time to try an engine rebuild or paint the car yourself or change suspension etc. Youtube is your friend.

Yeh I’ll eventually chase some power, but got other debts/stuff to pay for. 

Hard enough convincing the misso to let me paint it haha, but she’s cool with it all. 

And thanks Prank, everyone has a story to tell I guess!

Anyway small update, paint in 2 weeks, in anticipation I found some coupe pods (would have liked Sedan pods but these were $40) hard to see in photo but it makes it look so much better  

3A030A8C-09FA-4876-BF79-8B7CEAC20743.thumb.jpeg.5d8a8d35db622a32aab3bb66c817f616.jpeg

 

Also installed my clutch pedal, have a manual brake pedal to go in (or if I cbf just cut this one down) 

0B644800-B409-479C-BADA-27F6747F80AD.thumb.jpeg.59752b55489c76515048c26d026e8726.jpeg

Wont even look for a gearbox until Paint is done. But will start collecting bits and pieces. 

  • Like 1

I remember years ago we converted a XYGT Falcon from auto to manual and after driving a manual in my own car I didn't test how the pedals feel. So we finished the job, original brake pedal from the auto still in place. Trouble is, I hadn't gotten used to the pedal placement as the clutch was in the same place as my car. We were heading out to Penrith, long before the roads had stop lights at the intersection of The great western Highway and Mamre Road, and as I came to the stop sign I put my foot on the accelerator instead of the brake because the brake pedal was so far to the left. 

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Just now, skylinecouple said:

We flew across the Great Western Highway at close to 100kph and hit absolutely nothing on a Saturday afternoon with traffic everywhere. Change the brake pedal.

Jesus, yeah I just cut it down when I converted my Sylvia and it was fine, but I have a manual one to go in so might as well do it. 

A friend bought a Daihatsu something or other which came from the factory as an auto. Brake pedal had the same problem. To the left. He had just been down the shop to get oil in his normal car as he was doing an oil change on the Daihatsu. Got in the little bastard after topping up the oil, put it in reverse and smashed the accelerator to the floor thinking it was the brake.

Trouble is, he had the drivers door open at the time and it hooked onto the fence beside the driveway. Broke the fence, bent the door hinges, crushed the door itself and rammed the car behind him, his car. 

You may get used to the pedal but it's not funny when somebody else drives it. Well, in the Daihatsu it was, but not any other time.

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

2 hours ago, skylinecouple said:

Just thought I'd ask, have you decided on a colour if you paint it ? Black is good but damn, hard to keep clean or shiny. What was the original colour ?

I've been set on just staying black and going KH3 Black, but I've seen a few in KN6 grey/black, and it makes it pop a little more. 

I hate swirl marks, but too much more effort going from dark to light. 

  • 1 month later...

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

On 9/29/2018 at 6:57 PM, skylinecouple said:

Looks great. Couple of good polishes and it will look like Darth's helmet. Don't go too dark on window tinting. Makes it cop bait. Black paint, black tint, black tyres. It's all a bit much. 

I hate dark tint. I drive a low car, the last thing I want is to give them a reason to pull me over haha. 

It looks low but it's not really (apart from the exhaust)

Need to get:
- New Exhaust
- Manual conversion. 

 

Also trying to take some nice pics to upload. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...