Jump to content
SAU Community

Recommended Posts

On 3/25/2018 at 10:44 PM, rat32r said:

Just want to and you can get ls1 alternator from 140A -220A is the most I have seen. Ls2,ls3 all fit my kit but will require a different plug for charge light.

Do you know of any conversion looms to use LS2/3 alternators with the RB factory connector?

Do you know of any conversion looms to use LS2/3 alternators with the RB factory connector?

Ls2 and ls3 alternators are pwm controlled.
So unless you have a aftermarket ecu that you can program to control alternator output the stick with ls1 as it is plug and play
  • Like 1
On 2/20/2019 at 6:02 PM, rat32r said:


Ls2 and ls3 alternators are pwm controlled.
So unless you have a aftermarket ecu that you can program to control alternator output the stick with ls1 as it is plug and play

How does the voltage hold with the larger alternators? Is there a negative difference with the alternator size upgrade, that would require the "big 3" wiring setup? I doubt 140A would have an issue, but 200A+ may strain the stock wiring.

  • 4 weeks later...

Does anyone have a specification sheet for these alternators?  Primarily what is the maximum rpm it can run to(eg 9000 engine RPM)? What current does it make at what rpm?(eg 50 amps at idle? 100 amps at 2000 engine rpm?)

Thanks Matt

So im having an argument with a mate. I have just recently purchased a 140amp alternator kit from cwc. And he reckons ill need my car touch up tuned as it runs more voltage what are your guys thoughts on this should i tell my friend he needs to pay off the tea spoon or is he right?? 

Does anyone have a specification sheet for these alternators?  Primarily what is the maximum rpm it can run to(eg 9000 engine RPM)? What current does it make at what rpm?(eg 50 amps at idle? 100 amps at 2000 engine rpm?)
Thanks Matt

Hi Matt,
I have made the pulley ratio for my kits to be about to handle 10-11k rpm
As that would equate to 6-7k rpm on the ls1 motor.ls motor runs a larger diameter harmonic balancer and a smaller alternator pulley.
With the RB the balancer is smaller and the pulley is larger.
Also I have had cars running at idle with 3 Walbro 460s all on at idle with aircon on max,headlights lights on and maintains 14.2volts.
Below is a data sheet from a generic ls1 alternator a customer sent me.IMG_5940.jpg
So im having an argument with a mate. I have just recently purchased a 140amp alternator kit from cwc. And he reckons ill need my car touch up tuned as it runs more voltage what are your guys thoughts on this should i tell my friend he needs to pay off the tea spoon or is he right?? 

Hi, depending on how bad your voltage was before the alternator swap It can effect to tune.
Ie. I had a car running down to 13.2v on full load swapping to ls alternator I had 14.2 at full load. With extra voltage across the whole map.
It made the car run slightly richer than previous as noticed on the wide and when driving but didn’t do proper before alternator Dyno and after alternator swap dyno to get exact figures.
21 minutes ago, rat32r said:


Hi, depending on how bad your voltage was before the alternator swap It can effect to tune.
Ie. I had a car running down to 13.2v on full load swapping to ls alternator I had 14.2 at full load. With extra voltage across the whole map.
It made the car run slightly richer than previous as noticed on the wide and when driving but didn’t do proper before alternator Dyno and after alternator swap dyno to get exact figures.

Ok so he isnt wrong. I can tell you i drove the car today for around 3 hours as i went away with the family. And with the a/c blasting and thermos kicking in and out voltage was reading between 13.2v and 12.6v. So what your saying is worst case the car runs richer until i can get it touched up note these readings are my standard alternator not the new one coming from you

Edited by mrrb20det

It depends how accurate the injector voltage offset data has been set up. The point of the offset is to account for this exact thing, so if things are all set correctly no need to retune.

 

  • Like 1
  • 3 months later...

Received & fitted my kit from Andrew yesterday.  

Andrew was very easy to deal with and sent the alternator off asap. 

Overall very happy with the kit. It was packaged very well for postage.

Quality looks great and everything was there for a quick install. 

Have around 14.2v @idle when warm. 

I would highly recommend the kit to anyone considering it. 

 

Cheers mate  @rat32r

20190709_115123.jpg

20190709_115248.jpg

20190709_115256.jpg

20190709_121815.jpg

20190709_121821.jpg

  • Like 1

Is this the same as the https://www.ebay.com.au/itm/273533325819 kit on eBay?  Any discount for us SAUers? haha.

Does anyone know how they compare to other approaches?

https://frenchysperformancegarage.com/products/nissan-rb-high-output-alternator

https://www.rhdjapan.com/ard-low-resistance-high-output-alternator-z31-r31-r32-r33-r34-c34-c35-wc34.html

The main benefit I could see of the LS1 + adaptor approach is once you have the bracket, adapter, pulley, etc - if the alternator ever needs replacement you can just pick up cheaper LS1 140A alternator?

10 minutes ago, jrm said:

Is this the same as the https://www.ebay.com.au/itm/273533325819 kit on eBay?  Any discount for us SAUers? haha.

Does anyone know how they compare to other approaches?

https://frenchysperformancegarage.com/products/nissan-rb-high-output-alternator

https://www.rhdjapan.com/ard-low-resistance-high-output-alternator-z31-r31-r32-r33-r34-c34-c35-wc34.html

The main benefit I could see of the LS1 + adaptor approach is once you have the bracket, adapter, pulley, etc - if the alternator ever needs replacement you can just pick up cheaper LS1 140A alternator?

Yep same as the ebay kit. 

 

Have a look back through this thread, pretty sure a few people have had a wait on the ard alternators and not readily available and cheap like ls1 alternators. Pick up 2nd hand ls1 alt for $50-$100.  

As you said the advantage is being able to remove the pulley & adapter to use it on another ls1 alt if need be but if you buy a new one in the kit the likely hood of needing to replace should be pretty low. 

 

I'd send Andrew a message and get a price. His number is on the thread a few pages back.

Is this the same as the https://www.ebay.com.au/itm/273533325819 kit on eBay?  Any discount for us SAUers? haha.

Does anyone know how they compare to other approaches?
https://frenchysperformancegarage.com/products/nissan-rb-high-output-alternator
https://www.rhdjapan.com/ard-low-resistance-high-output-alternator-z31-r31-r32-r33-r34-c34-c35-wc34.html
The main benefit I could see of the LS1 + adaptor approach is once you have the bracket, adapter, pulley, etc - if the alternator ever needs replacement you can just pick up cheaper LS1 140A alternator?

I take of care of sau members just email me [email protected]
Or message 0417677905
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
    • As above, replace as many as you can afford. If anything, due to old age.
    • Can confirm previous shop that built my motor had no fking clue about oil control and caused my motor to shit itself after two track days. Current shop, Birrong Automotive, has managed to build me a motor, not to mention, has also let me tune it myself and it has yet to blow up after 7 track days. Great oiling success, yashimash.
×
×
  • Create New...