Jump to content
SAU Community

V36 350GT - Air-con , radio not working

Pac
 Share

Recommended Posts

Ben C34 Grand Master

Ben C34

Posted
Posted
58 minutes ago, Pac said:

Worth a thought , but i'm too old to be doing that , back in my r34 days yeah but in the v36 i'm not sure if it suits it.

No worries. You are now in the naughty corner and will not get any more help from anyone on the whole internet as a result of your choice. I dont make the rules so don't blame me.

Pac Community Regular

Pac

Posted
  • Author
Posted

Nick - No need to bite mate , i converted it about 2 weeks ago , but the GPS was acting up so i opened it up again and thats when the relay gave up on me , but now all its working.

 

Ben - Happy to be in the no hooning naughty corner but can yo at least not take away my support , its rough trying to work on this imports ..

 

 

Pac Community Regular

Pac

Posted
  • Author
Posted

Its the Xnavi unit from eBay , the guy selling it was really good her give a few directions and i figured it out after that , it took me about 2 hours to fit it properly and get it started.

I left the buttons in Japanese , since its not that heard to figure out what each one does  and it still leaves it with the JDM look , the only thing i wasn't able to connect with the wing mirror camera and the voice control  but the rest works.

I'm happy to help people with some guidance if they buy this unit on how its installed. 

Pac Community Regular

Pac

Posted
  • Author
Posted

Max , the conversion harness does come with connection to the side camera but i just don't have the energy to run more cables though the car , plus i only have the v36 for another 2 months then i'll be selling it when the new car arrives .     I still have the old unit actual i have 2 of them now since i wasn't sure what was wrong with it when it switched off i had to buy the full set from a spare parts place , so now i have a spare box and the top cover and switches.  

  • Like 1
  • 2 weeks later...
YEE-HAA Collaborator

YEE-HAA

Posted
Posted
On 3/10/2018 at 5:55 PM, Pac said:

Its the Xnavi unit from eBay , the guy selling it was really good her give a few directions and i figured it out after that , it took me about 2 hours to fit it properly and get it started.

I left the buttons in Japanese , since its not that heard to figure out what each one does  and it still leaves it with the JDM look , the only thing i wasn't able to connect with the wing mirror camera and the voice control  but the rest works.

I'm happy to help people with some guidance if they buy this unit on how its installed. 

Im interested in this unit. do you have any details, maybe an ebay item number.  Was it on the Oz site or American?  Any other details you care to divulge would be interesting to know

thanks

Pac Community Regular

Pac

Posted
  • Author
Posted
On 21/03/2018 at 9:20 PM, YEE-HAA said:

Im interested in this unit. do you have any details, maybe an ebay item number.  Was it on the Oz site or American?  Any other details you care to divulge would be interesting to know

thanks

Mate the unit was for sale on USA ebay 

https://www.ebay.com/itm/172513428008

It comes posted Estonia so it can take a 3-4 weeks to be delivered and they don't seem to have many in stock. ( I think 3 left online at the moment) 

You will need to send pictures of you current unit in operation (screen) from my understanding that some units need a monitor as well and others just need the box.

It does cost around $990 US plus $50 delivery , so you are looking at around $1400 aus . ( My guess is the prices people quote around $2500 for conversion in Australia would be the unit maybe also the monitor , a couple of hours of work installing it plus markup for the installer ) 

It does take a bit of work getting it installed since the box it replaces does have slightly  different connections but the harness provided does help it and the seller does answer any questions you have on how to install the unit.

Hope this helps you with your conversion.

  • Thanks 1
  • 1 year later...
  • 1 month later...
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...