Jump to content
SAU Community

V35 rb26 conversion

Ali
 Share

Recommended Posts

Ali Rookie

Ali

Posted
Posted

Hey fellas,

Just recently joined on this, and I need a bit of input.

At this very point I am getting a rb26 built to slap in my 2005 v35. Has anyone on here undergone this ? Please educate me if so. On what I may face during this swap over, and what I can do to eliminate any hiccups.

 

thank you in advance 

Link to comment
https://www.sau.com.au/forums/topic/473819-v35-rb26-conversion/
Share on other sites
Leroy Peterson Grand Master

Leroy Peterson

Posted
Posted

Google it. There's a few builds around, mostly from early 2000's when V35/G35 was newer.

Everyone seems to completely agree it's a waste of time and money.

What would the car be used for? Would you be doing all the work yourself?

  • Thanks 1
Ali Rookie

Ali

Posted
  • Author
Posted (edited)

Well you can turbo the original engine. But compression on it is always different to get it up and running you’re looking at about 8 plus thousand. So I don’t get the idea of being cheaper! 

 

The RB 26/30 doing all the internals on the bottom end, custom plenum on the head.

fabricating new engine mounts 

Slight fabs for the gear box 

computer/tune 

12g 

With the work that’s getting done I’m looking about 400kw on the rear.

trust me guys not much more expensive then turbo charging the vq35dett engine 

Edited by Ali
Ali Rookie

Ali

Posted
  • Author
Posted

@Leroy Peterson as I stated in my initial post, has anyone undergone this process to there v35. I am just starting this process now. I never asked for help just wanted to know if anyone on here has done it.  

My Brother and I, are doing it. 

 

@Ben C34 Sydney Australia. Setting it up for the quarter mile & street car 

GTSBoy Grand Master

GTSBoy

Posted
Posted
2 minutes ago, ADDSKI said:
On 4/20/2018 at 9:20 AM, GTSBoy said:
3.5L > 2.6 L.
More sense would be to swap in VQ37HR + boost.

well if you going to make such an effort. Why not a VK45DE.

Well, now we're talking about choosing between a much more modern all alloy V6 that is more likely to fit into the engine bay, or a vintage all iron low performance V8 that is likely to be too long, too heavy, too wide.......

ADDSKI Contributor

ADDSKI

Posted
Posted
Well, now we're talking about choosing between a much more modern all alloy V6 that is more likely to fit into the engine bay, or a vintage all iron low performance V8 that is likely to be too long, too heavy, too wide.......
You can't be serious. Annihilate all. Watch old yes and no.https://youtu.be/dE76eJjVIac.
To be honest V35 wheelbase platform has far far greater capabilities and stability than any Rb26 could ever offer
ADDSKI Contributor

ADDSKI

Posted
Posted
You can't be serious. Annihilate all. Watch old yes and no.https://youtu.be/dE76eJjVIac.
To be honest V35 wheelbase platform has far far greater capabilities and stability than any Rb26 could ever offer
They are all alloy engine, that produce 254kw as base. Nismo racing in Super Gt series opt for this motor over the Nissan Gtr VR38DETT.....OH YES YOU CAN MAKE IT FIT.
sonicii Veteran

sonicii

Posted
Posted
1 hour ago, ADDSKI said:

well if you going to make such an effort. Why not a VK45DE.

There has been some with VK56DE (at least in a 350Z), but it is very tight fit and no space left for turbo charging.

I suspect you could extra better performance with a boosted VQ37 than an NA VK, as well as being easier to fit.

ADDSKI Contributor

ADDSKI

Posted
Posted
There has been some with VK56DE (at least in a 350Z), but it is very tight fit and no space left for turbo charging.
I suspect you could extra better performance with a boosted VQ37 than an NA VK, as well as being easier to fit.
Yeah I just thought the original idea wouldn't be worth doing. So just through in the idea of VK45DE

Sent from my SGP611 using SAU Community mobile app

GTSBoy Grand Master

GTSBoy

Posted
Posted
1 hour ago, ADDSKI said:
1 hour ago, ADDSKI said:
You can't be serious. Annihilate all. Watch old yes and no.https://youtu.be/dE76eJjVIac.
To be honest V35 wheelbase platform has far far greater capabilities and stability than any Rb26 could ever offer

They are all alloy engine, that produce 254kw as base. Nismo racing in Super Gt series opt for this motor over the Nissan Gtr VR38DETT.....OH YES YOU CAN MAKE IT FIT.

Sorry, was thinking VH with the iron block thingo.  But nevertheless, 254kW from 4.5L is not strong.  VQ37VHR makes essentially the same stick from just over 80% of the capacity.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Anyone running the VQ37VHR with forced induction?

      By GTSBoy · Posted

      Wrong question. There's no point in spending the rather large sum of cash and effort to add turbo, without taking it to the "sensible" limit of the motor itself. If you have to upgrade injectors, etc, then so be it. That is a tiny fraction of what it will cost you to turbo it.
    • GTSBoy
      Starter motor replacment teeth count.

      By GTSBoy · Posted

      Measure voltage at the starter solenoid terminal when the key is at start and it has clicked. If it is really low, then the suspicion falls on the ignition switch (contacts or wiring thereof) as causing a voltage drop instead of sending enough volts to throw the solenoid all the way to engage the starter itself. If it is a decent voltage, then the suspicion is on the solenoid. Might have s horted coil, or might hva dirty contacts. Rip the starter off, dismantle, clean up contacts and inspect winding. It might not be possible to see if there is a short in the winding though. I have a spare starter here that I could measure the resistance of the coil, as a guide to about what it should be, if you need a comparison. <parts hoarder>No you cannot have it.</parts hoarder>
    • oHBoy.
      Starter motor replacment teeth count.

      By oHBoy. · Posted

      lights are on just the one click.  
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Absolutely matters because, while a temperature change will eventually reach a sensor at the end of a static line, the response time is far far far too slow to be useful. Might as well not have a temp gauge at all.
    • f00stx
      Anyone running the VQ37VHR with forced induction?

      By f00stx · Posted

      When I was eyeing off the 370GT (after deciding I didn't want to spend 30-40k+ to relive my early 20s in an R33) I thought it'd be a good project to add a turbo to it. Now that I have a 370GT, and I've had a couple of chances to open it up, I'm pretty stunned by how much power it makes 🫠 Honestly, the way the VVEL opens it up, it almost feels like there's a little turbo tucked away in there somewhere. It's like Nissan looked at VTEC and said "hold my beer" 😁 Has anyone thrown a turbo into their 370Z or 370GT? Is there a conservative boost level you can run without having to upgrade the fuel system, or are bigger injectors and a bigger pump a given?
×
×
  • Create New...