Jump to content
SAU Community

Recommended Posts

Engine out. That looks serious! Hopefully serious upgrades not seriously broken.

After my upgrades, I am sitting at 360 awkw @ 20psi. I did a subset of the original plan. The main thing is just how much nicer the car is to drive with modern injectors, better ignition and e85.

2 hours ago, Robzilla32 said:

Engine out. That looks serious! Hopefully serious upgrades not seriously broken.

After my upgrades, I am sitting at 360 awkw @ 20psi. I did a subset of the original plan. The main thing is just how much nicer the car is to drive with modern injectors, better ignition and e85.

All preventative thankfully...

-head gasket

-head studs

-oil pump gears

-general inspection

-and engine bay respray

 

what turbos you go to make 360 @ 20psi?

All preventative thankfully...
-head gasket
-head studs
-oil pump gears
-general inspection
-and engine bay respray
 
what turbos you go to make 360 @ 20psi?
That sounds like some good items to tick off before more go faster bits.

Still using -9s but 2psi more plus e85 etc.
56 minutes ago, Robzilla32 said:

That sounds like some good items to tick off before more go faster bits.

Still using -9s but 2psi more plus e85 etc.

good results, definitely could pump a few more psi in there now you're running E85 if you wanted.....

25 psi if you have head studs, head gasket etc shouldn't be too much of an ask.....

On 11/15/2018 at 7:38 PM, Robzilla32 said:

After my upgrades, I am sitting at 360 awkw @ 20psi. I did a subset of the original plan. The main thing is just how much nicer the car is to drive with modern injectors, better ignition and e85.

That's a lot of power for -9's, especially only at 20psi.  What other mods do you have?  

Edited by TXSquirrel
That's a lot of power for -9's, especially only at 20psi.  What other mods do you have?  
Performance stuff:
Plazmaman intercooler (the smaller one not 100mm)
1000cc injectors
Walbro 460
AC Delco coils

Other stuff that may be relevant but probably marginal benefit:
Built engine
Trust front pipes
Apexi exhaust
Apexi pods
3 hours ago, Robzilla32 said:

Performance stuff:
Plazmaman intercooler (the smaller one not 100mm)
1000cc injectors
Walbro 460
AC Delco coils

Other stuff that may be relevant but probably marginal benefit:
Built engine
Trust front pipes
Apexi exhaust
Apexi pods

Are you still running factory intake piping?

Edited by mr_rbman
2 hours ago, Robzilla32 said:
3 hours ago, mr_rbman said:
Are you still running factory intake piping?

Yes. Factory intake piping, BoV and manifolds.

that's what i wanna hear ;) 

12 hours ago, mr_rbman said:

Are you still running factory intake piping?

I got this divided charge pipe made not too long ago, if you are unsure about buying a whole intake piping kit.

http://www.gtrusablog.com/2018/04/split-twin-turbo-pipes-by-alex.html

10OUdmM.jpg

BHVgJMv.jpg

This is what it looks like installed in mine.

MOS0ZwH.jpg

16 hours ago, Robzilla32 said:

Performance stuff:
Plazmaman intercooler (the smaller one not 100mm)
1000cc injectors
Walbro 460
AC Delco coils

Other stuff that may be relevant but probably marginal benefit:
Built engine
Trust front pipes
Apexi exhaust
Apexi pods

Are you running any cams?  

I'm still running factory air box, so maybe that's my problem.  Or maybe because I'm running R35 injectors at factory fuel pressure.  I read somewhere that R35 base fuel pressure is 1 bar higher and that's why it can get that much power out of 570cc.  Not sure if that's true.

Are you running any cams?  
I'm still running factory air box, so maybe that's my problem.  Or maybe because I'm running R35 injectors at factory fuel pressure.  I read somewhere that R35 base fuel pressure is 1 bar higher and that's why it can get that much power out of 570cc.  Not sure if that's true.
Just to clarify, the power output is based on e85 and not 98.

My cams are factory.

I recall reading that the air box is good for 400kw. I just felt like hearing some more whoosh.

As for the injectors, mine were rubbish and needed to be replaced regardless of any power goals. I thought that you needed a higher cc rating than 570 to support e85 (on an RB26).
10 hours ago, TXSquirrel said:

I got this divided charge pipe made not too long ago, if you are unsure about buying a whole intake piping kit.

http://www.gtrusablog.com/2018/04/split-twin-turbo-pipes-by-alex.html

10OUdmM.jpg

BHVgJMv.jpg

This is what it looks like installed in mine.

MOS0ZwH.jpg

already running the divided piping, pretty much a necessity...

 

6 hours ago, Robzilla32 said:

Just to clarify, the power output is based on e85 and not 98.

My cams are factory.

I recall reading that the air box is good for 400kw. I just felt like hearing some more whoosh.

As for the injectors, mine were rubbish and needed to be replaced regardless of any power goals. I thought that you needed a higher cc rating than 570 to support e85 (on an RB26).

ye 570cc injectors will get you nowhere near 400....

Mine should be fairly close to your modification list once finished @Robzilla32, only I'm keeping factory airbox but i'll be running some mild cams and slightly larger turbos...

My goal is 350kw without e85, that's why I thought the 570cc would get the job done.  I rarely drive mine and a full tank would last 2-3 months, so I can't really run e85.  I also thought running R35 injectors with R35 AFMs should be a friendly combo to Nistune. 

Getting closer at 315kw during my last pull.  Bought a 76mm Plazmaman but yet to install it, still waiting for my tuner's dyno to be repaired...

10 minutes ago, TXSquirrel said:

I also thought running R35 injectors with R35 AFMs should be a friendly combo 

Nah, who told you that?

Any injector is Nistune friendly, especially on Feature Pack 1 and 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...