Jump to content
SAU Community

Recommended Posts

What part of Sydney are you in?  Just had the same done for my R34 by Mark at MRC Performance & Dyno in Castle Hill, very knowledgeable with all things RB, also the best troubleshooter i've been to, he's solved many issues other repuatable workshops either caused or hadn't picked up on.

They offer a really good health-check / inspection which includes a quick run on the dyno to make sure all is in order also, mention this as it's really worth the $120 odd dollars so you know what you're up against for future mods etc.

If it helps break the ice, mention Daniel with the black R34 GTR suggested you call.

https://www.facebook.com/MRCDynoServices

Edited by JGTC

What do you consider a major service?

If it's a basic fluids, plugs, filters type of thing invest in a good jack and some jack stands and do it yourself.

You will save thousands over time.

Nothing about it is hard.

If you cannot see yourself doing a timing belt, if that's required, any local good garage can do that, just get them to do the timing belt, water pump.

The problem with getting basic work done at "tuning shops" is that they cost alot of money, this is a fair thing though because you get what you pay for, usually, but that is really only required for their technical expertise, there is nothing technical about doing the basic service stuff.

Plus money saved can be better spent on parts, or shiny things for the missus to take her focus of the car parts that she found stashed in the garage.

Plus there is nothing more satisfying than working on your car.

Basic service parts cost around $100 - $150 dependent on parts required.

 

14 hours ago, eVo25t said:

I'm talking timing belt, water pump, gearbox oil, diff oil and probably needs a dyno run too. I'm stuck because I moved to a unit and dont have all my stuff anymore

 

 

I've never used one but here is an option, maybe, depends on cost though.

 

https://www.diyautogarage.com.au/about/

4 hours ago, mlr said:

I've never used one but here is an option, maybe, depends on cost though.

https://www.diyautogarage.com.au/about/

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

  • Like 1
28 minutes ago, GTofuS-T said:

I always wondered about the legalities of such a business, cool idea though. I miss the days of servicing my car on the street in Elizabeth Bay getting death stares from all the hoity toity locals :4_joy:

I would love to start up a shop like that, with a gym with only racks and free weights

Oh, and a bar

It would be just like my old garage, only without the comments of, "how long are you gonna be", "can you keep the noise down", "how much have you drunk", "do you think it's a good idea to drink and train/work on the car in the state your in".

That shit gets tiresome..

  • Haha 2
2 hours ago, r32-25t said:

Must wear safety glasses at all times, f**k that

Only a small inconvenience.

I actually aways wear safety glasses whenever I'm under the car, usually if I got shit in my eye working under the stands my head would bounce between the floor and some part of the undercarriage at least 10 times....

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...