Jump to content
SAU Community

Need help on R32 gtst

HarveyDanger
 Share

Recommended Posts

HarveyDanger Rookie

HarveyDanger

Posted
Posted

Ok guys I got an issue I’d like to hear your thoughts on. I have a r32 gts-25 non turbo that I swapped a rb20det into a few months back. Also added split dump, full 3” TBE, nistune, wideband, and other gauges. So when warm it has always had a breakup in boost at WOT. It was getting to around 11psi on my boost gauge. So I also had a 45v1 rb25 turbo that I had planned to throw on when I was diagnosing the break up, since I would already have everything apart. This past weekend I installed the turbo and used the actuator off the 20. Replaced coil packs/ gapped to 0.8/ changed afm and still had the breakup. So tonight I was out driving. I pulled over and disconnected vacuum port to BOV to see if there was any difference, and boom, the misfire/hesitation under WOT was gone. She ran and drove great, even though it had flutter. But the weird thing is I am only getting 7 psi constantly even though I changed the actuator off the 20 that I personally have had hitting 11psi for months. I’m hoping the couple beers I’ve had this evening might be having me miss something obvious...sorry for the novel. Thoughts please!

Link to comment
https://www.sau.com.au/forums/topic/475432-need-help-on-r32-gtst/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

If you disconnect a bov it will leak when there's boost in the system. Pressure helps keep it shut.

Do you have a wideband? If leaking boost out of the bov made it run right it would be crazy lean otherwise.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
    • MBS206
      Hi everyone.

      By MBS206 · Posted

      I believe @Duncan has given it a crack at Mt Buller before (in actual race conditions)
×
×
  • Create New...