Jump to content
SAU Community

Recommended Posts

Welcome. Welcome one welcome all - to partz for sells. Can post auswide, pm for costs.

First - Nismo adjustable fuel pressure regulator. Fairly new, and in good working order. I know this for fact, cos i'm still currently using it, but won't fit my new fuel rail so...

$100. 

20190101_162816.thumb.jpg.ad3ae5077702ae92a3d0f728a062cb01.jpg

 

GK Tech poly subframe bushes. These are BRAND NEW - didn't even make it to the garage, and are still in the box. Bought them to address roll centre correction but achieved the same by cutting the top off the whiteline bushes I already had installed so didn't use these. My loss, yo gain. Fits a number of vehicles; details here on the GK Tech website - https://au.gktech.com/polyurethane-rear-subframe-bushes

$110.

20190101_174621.thumb.jpg.8a3817f66949bf5ac2d80309a5a907f8.jpg20190101_174625.thumb.jpg.b842849d10a49d7cf9a7b980c7b6f5a3.jpg

 

Apexi SAFC NEO. In excellent working order and worked well for me, but now have a standalone ecu. In good working order as pics show. Has a strip of thermotape across the top (protect it from being roasted when parked in sun) - not an issue, but to mention it for detail of condition. Other than that, bloody choice bruv.

$200.

20190101_163100.thumb.jpg.e97bcc1c6e5d1405d4df75d164d17616.jpg20190101_163034.thumb.jpg.4a1cff2a01e93a3e24690182e0a77c57.jpg20190101_163051.thumb.jpg.eb85da45851d6041f2d8810c8b315077.jpg

 

 

 

 

Tein S-Tech springs, full set of front and rear- for R33 gtst plus others. Bought when I thought my coilovers has developed a knock but they hadn't, so these are test-fitted only - otherwise brand new still in box. These are the firmer type around 4.5kg from memory? so halfway between usual aftermarket springs and hard coilover springs. Possibly the best lowering spring for a street car that you can get.....possibly. Saw a post about counterfeits going around - check the logo and part number printing in the pics; they're genuine Tein. 

$300

20190101_163355.thumb.jpg.baaadb6b31acfdc7838f891309d45049.jpg20190101_163415.thumb.jpg.1d02c20c57e9db8b37ad2c596548fa2f.jpg20190101_163323.thumb.jpg.726effd265a3e4d78361f8a8e32bd367.jpg

 

also have

- r33 gtst auto non abs tailshaft - R$30

- set of 6 r33 stock injectors - $20

- R33 gtst front LCA's, welded braces/boxed with Hardrace rubber bushes, VGC. $50

- R33 gtst stock front and rear camber arms, rear traction arms - $20 a set.

- GkTech hubcentric wheel spacers for R33/34, S14/14 etc - in 10mm, 13mm and 15mm thickness - $25 a set

also - ARP main stud set for RB25DET - BRAND NEW still in box...although as you will know, these come in a plain white box as not an 'official" ARP product in their usual logo'ed box (put together by their dealers? - genuine ARP though). Bought for the engine rebuild I never got around to rebuilding. Only thing is I used the lube sachet for my head studs, so no lube but otherwise complete. 

Think they're around $350? steal then at $250.

no we're not done yet - B&M oil cooler - multipurpose, but I used it as a auto trans cooler. Thick solid construction, laughs off flying road pebbles with ease. Comes with ducting and custom hardlines and mounting brackets - is 100% bolt on to your existing factory mounting points and rubber lines, for R33 gtst, in drivers side front of wheel arch.

$100

2084923555_BMcooler.thumb.jpg.adcfdb9dbb7e6dfb5756a69b73fd2485.jpg

 

Stainless steel intake pipe and silicone joiners for r33/r34 gtst. Has the fitting for BOV return (2 in fact, if you're running aftermarket instead) and PCV return line. Also thermotape-wrapped for your pleasure.

$50

20171002_122450.jpg.18adb77f2b02e996d1071c72b33be939.jpg

20171002_122441.jpg.e456920dd614a75be0a5b06c2d0b2722.jpg

 

Are you able to measure the length of the R33 LCA's? Need new ones for my s15 if they are the same (think they are)

Bushing to balljoint would be great, cheers.

6 hours ago, iruvyouskyrine said:

Are you able to measure the length of the R33 LCA's? Need new ones for my s15 if they are the same (think they are)

Bushing to balljoint would be great, cheers.

ehhy for sure my friend for sure, i do for you. It measure 395mm from tip to tip shown 'ere.

1089440322_controlarm.thumb.jpg.39fff1ebde827067c1b983c6ce0d295d.jpg

 

B&m trans cooler and intake pipe now sold. Cheers to Rustynuts for a very smooth transaction.

Pm replied Josh.

price drop on Tein springs, $250, and further info

SPECIFICATIONS
- Front Spring Rate: 4.1 kgf/mm
- Rear Spring Rate: 4.4 kgf/mm
Ride Height Drop (ECR33)
- Front: 32mm
- Rear: 30mm

On 1/4/2019 at 7:45 AM, iruvyouskyrine said:

Sweet i will measure mine tonight and get back to you, cheers

FYI, R33 arms don’t have the hole w/cup for the S15 swaybar link. Bump stop is also slightly different. 

  • 3 weeks later...

Nismo FPR now off vehicle, ready to go.

Also have - BrakeWest s/steel braided lines. These are ADR compliant/stamped, and a very high quality line - same layout as stock with the mounting blocks built into the lines. Think Nismo but a little more heavy duty construction. Used but in extremely good condition. Front only sorry, I still use the rear lines. 

$40, or add $15 postage anywhere in Oz.

20190127_115059.thumb.jpg.01bf2c19c38141613a5ddba3d9e1145e.jpg

20190127_115106.thumb.jpg.4e049930bfa544b2bb53cae8b79efd18.jpg

Another 3in stainless intake pipe. Has ports for BOV and PCV return, and is thermowrapped. This is the lower section only this time. You need to use a 2.3in>3in reducer from turbo to the pipe, and the reducer pictured is 3in>3.5 (I have now gone 3.5in all the way so this section not needed). So use either another bit of 3in routed to your afm/filter/whatever, or go 3.5 (gave me a little better throttle response).

$50, or add $18 posted anywhere in Oz. 

20190127_115029.thumb.jpg.60fefed31d57d469f5e3af93513a2e3d.jpg

20190127_115034.thumb.jpg.f5194d5a1114867b996a2842f05a80fd.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...