Members Rides

[Veilside R33]

Hey guys i think its about time we started up our own local members rides thread.

basically all u need to enter are the details of the mods done, perhaps what u have planned and most importantly some PICS!!!

should come in handy for us to put some rides to peoples names, and essentially help us to get to know more bout each other and our cars.

lets try to keep it as clear of clutter as possible so try not to hold conversations if possible) and hopefully if we get a few posts it can be made into a sticky.

anyway heres mine to get us started.

http://www.pbase.com/yld_sky/yldsky

fully stock

[Terminal]

I'm not doing anything else, so i'll share

1993 R33 Gunmetal Grey

17" shadow chrom rims (dunno what sort)

3" custom turbo back exhaust

HKS Pod + Z32

Blitz BOV

Turbosmart boost controller

Lowered

Gunmetal interior

Planned:

400R front bar under construction

Stagea

[choochoobaa]

havnt posted here in a long while but im bored so here i am.

hi to everyone that does not know me which, i think, is everyone.

1993 r32 gtst

lowered

Veilside front and skirts

3" turbo back exhaust

alpine sound system with tv that doesn't display much

turbo timer

aftermarket steering wheel

and the best thing of all... the word skyline lights up an aqua colour at the back (hope that makes sense)

the rest is stock due to lack of funds

oh and the car is white

[Aurora]

The ACT Roll Call is really the same thing Andrew

But hey, why not start a new one

1996 GTS25t Series II

HKS Type S Intercooler

Power FC and Hand controller (in the mail as we speak)

Blitz Type S Electronic Boost Controller (10psi)

Trust Air Filter

3" Dump pipe/front pipe

High Flow Cat

3.5" Cat back

Cusco Coilovers

DTM 18x9 and 18x10 wheels, Falken ST115 255/265x35

Plans are to get the Power FC in, Fuel Pump, Injectors, Cams and Whiteline suspension. The Cusco ones are stiff as a bitch. Also got all my stereo gear waiting to go into the car.

[SkyGTRline]

Hey all..... I dont post to much on ere, but ill put some decription to my name.

Name :Andrew

Got an R32Gts-t

Blue with purple purl

Final Konnexion Full bodykit (one of a kind)

Stock rims

Stock zorst with Twin tip Muffler

Alpine Stereo system

Plans: 18-19inch rims, 3" zorst Turbo back, RB26 Conversion... All to come....

Nothin much done yet...

[Gus-]

well i dont have a car yet. but plans for a car are a R31 series two silo. grey on grey and silo rims but sprayed black. then prolly a GTS1 front bar made up and a nice barrel tip (inspiration for me name)

or a DR30 imported from japan but that will probly come second

[r33skylinegtst]

Why not...

I'm Graham, 17 i own a black '96 R33 GTS-T. Got pics of it in my gallery and also here http://gossie.actewagl.net.au

Current mods are just what the previous owner put on it... from memory;

- Kakimoto Exhaust System

- Cusco Front + Rear Strut Bar

- Pod Fliter

- BOV

- NISMO Dashboard

- Turbotimer

That's about it i think. Nothing too serious. Planned mods

- New stereo system (putting that in at Christmas) Clarion headdeck + Alpine 6.5" rears

- 17" or 18" wheels... that won't happen for a while though

- Subwoofer(s) + amp

I don't get to drive it till November though, it's my 18th pressie. If you see it on the roads though give a wave, it'll prolly be one of my parents driving with me in the passenger seat

[Stirlo_GTR]

Hey Boys & Girls.

I'm Stirlo,

New Car is a Gunmetal R32 GTR SKyline,

mods:

- HKS Super Dragger Exhaust turbo back

- Air Pods

- Full suspention Package & Front/back strut bars

- Std Wheels painted white

- hmm more to come.

[NJR 34GTT]

Howdy,

Nathan, the happy owner of an r34 GT-T.

White

Nismo bodykit

Tein HAs

APexi Pod

Don't really wish to divulge more specs on engine etc as I don't think its a good idea posting for thieves to get a nice list.

Few plans down the track but have to save for a house too

[tridentt150v]

Full lock nismo diff

Nismo G Max II clutch

Tein coil over height and ride adjustable

Super advan wheels 245/255 yokohama advan tyres

hks pod filter

Z32 AFM

blitz 700x600x70 fmic

hks evc

blitz turbo timer

apexi turbo gauge

Greddy gauges x3:oil pressure, oil temp, exhaust temp, mounted in a dash pod

cusco adjustable alloy rear GT wing

alloy oil cooler

Apexi alloy radiator

master cylinder brake brace stop bracket

3 1/2 exhaust hks viper 5" s/s muffler

cusco front top bar on suspension

MP3 player

300kph nismo speedo

different front bar

carbra

momo ‘racing’ steering wheel

razo gearknob and accelerator pedal

project U front discs [brakes]

GTR front calipers

And I'm told its, a bigger turbo [i haven't seen a std one, so looks no diff to me, but I suspect it is just an upgraded std one]

bigger injectors

aftermarket ECU, no markings that I could see, so don't know what sort

Some mods it came with, some I’ve bought and installed myself

Plans to upgrade the turbo and the fuel pump [and maybe a FC with hand controller].

I'm not in Canberra, but I'm closer to it than any other SAU section, will meet up one day.

Pics in the SAU gallery.

[Amaru]

Well most of you have seen my car...

1992 R32 GTR -- white

it goes psssccchhhhhhh

[Fitzpatrick Speed Works]

A few know my car but seen as though its never on the road (read blown up) here we go oh and this is how it will be when its finished in october!!!

BCNR32 GTR :: 10th month 1993

ENGINE: RB30/RB26 Hybrid

ENGINE MODS:

Tear dropped /Knife edged/Cross Drilled/ balanced, ground and linished FMS prepped Crank

O ringed/ torque honed and line honed block

Clevite 77 H- Series NASCAR bearings

FMS crank girdle and mains

Custom FMS sump/ oil capacity 9 litres/ trap-doored and custom swirl and windage trays

FMS oil pickup

R34 GTR N1 Oil pump,

Jun crank collet

Brass welsh plugs

Nismo main end bearing

Eagle H-Beam rods with ARP 2000 rod bolts

Arias 20”thou forged pistons with floating gudgeon

Compression 8.4:1

Chromium rings

FMS customized waterpump

FMS modified rb30 tapped head threads and ARP bolts

HKS head gasket

CC’d head chambers

Ported and polished rb26 head

HKS Step 2 valve springs and retainers

HKS step pro inlet cam 272/ 10.8mm lift

HKS step pro exhaust cam 272/ 10.8mm lift

HKS adjustable cam gears

Custom made Skylines Performance exhaust manifold 316 stainless

HKS t45 s/ Modified with t51 h-trim compressor and exhaust wheels

Modified rear housing .86 A/R rear housing

HKS 48mm external wastegate

Mandrel bent 3 inch 316 stainless intercooler piping

Trust SPL drag core 600x330x128mm/ Custom endtanks

FMS modified and chromed plenum

FMS custom fuel rail

rochester 1000cc injectors

HKS Rom chipped standard computer

SX rising rate fuel reg

Bosch twin 928 (500hp) fuel pumps

Mallory 110 lift pump

RCI foam filled aluminum fuel cell

FMS surge tank

FMS ½ inch dual fuel lines

Davies craig thermos

FMS developed Gilmer drive power steer 2 inch

FMS modified single stage power steer pump

Stock AFM’s

HKS twin pod filters

FMS oil cooler kit

DRIVETRAIN/ UNDERNEATH

Full 3.5 inch exhaust

HKS 6 inch muffler

3 inch cat

OS GIKEN triple plate clutch

chromoly billet flywheel

FMS hicas locking bar and removed hicas

FMS short shifter

Bilstien coil ride height and damper adjustable coilovers

Full nolethane bushes

Whiteline oversized swaybars and adjustable control arms

Camber kit

EBC green stuff pads

OTHER STUFF

18x10 inch work VS wheels with 265/35/18 rubber

Momo peddles

FMS gearknob

Custom parcel tray and wiring through car, light weight un-backed carpet

Stripped and painted boot

Apart from that she’s stock

[leech_]

Apart from that she’s stock

thats almost as stock as mine lol Um i will get my details up soon

[Jay95R33]

Finally got a picture of the Stagea !!

Mods include...... nothing !! Totally bone stock standard Oh, expect for the (just put on today) R34 GTt wheels.

But it does have the full black leather interior and duel sunroofs if that counts for something.

My long term goal is 200awkw It'll be a total sleeper, the only exterior mods will be the wheels.

J

[Gus-]

mmmmmm. very nice jay. Those rims look good!

[Jay95R33]

Thanks. Yeah they are much better than the stock ones.

[NJR 34GTT]

Where did you source them from? Figure at some stage someone will steal my centre caps and will need replacements.

[Jay95R33]

I got them second hand a few months ago from someone in Sydney. $400 for the 4 rims with all the lock nuts etc.. Wasn't too bad, I've seen better bargins around but you've got to be quick.

J

[banger]

Datsun 1200 Ute

Candy apple red

CA18DET (pretty rooted, to be replaced soon!)

s13 5 speed gearbox

GT28 @16psi

Plazmaman front mount intercooler

22mm whiteline swaybar

3.9 Borg Warner diff

V8 tailshaft

EMS Stinger 4424

Type 1 BOV

Front: 180b struts w/ verada disks

and commodore calipers

Rear: Reset inverted leaf.

Commodore brakes

3" exhaust back to 2" tip

FR17" Simmons

Custom oil catch can

pics at:

http://www.alwayssideways.com/qikdatute.asp

[jnr_j]

Name: John

Nissan Skyline R33 GTS25t Series 2

12/1995 (first full series 2s)

5 speed manual

Metallic Silver

ABS

3 Point Immobiliser

HKS Sequential BOV

Apexi Power Intake

Apexi Turbo Timer

Nismo Clear Side Indicators

Pivot Boost gauge

Pivot Air/Fuel tweaker type thingy

Aftermarket (HKS?) Cat Back twin exhaust

Aftermarket Cat

TEIN springs/shocks, lowered

Linearetta rims

(225/235)/45ZR17 rubber

Endless racing pads on front

Pioneer DEH-P6450 Head Unit

JL Audio TR690-TXi 6x9 Rear Speakers

Response AA-0435 4 Channel x 100W RMS Amplifier

http://users.tpg.com.au/johnkg/skyline/index.html