Jump to content
SAU Community

R34 problems


Joshnew6
 Share

Recommended Posts

Hey guys! I'm running 25 pounds of boost on E85 in my 96 R34, when the pedal is flat to the floor it starts breaking up dose anyone know any reason why this might happen?

Link to comment
Share on other sites

57 minutes ago, Joshnew6 said:

I was told that I should gap them down from 0.8 to 1.1m 

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

Link to comment
Share on other sites

This topic will probably help you Josh,

As stated above if smaller gapped plugs don't work you'll need to upgrade your coilpacks, the three options what come to mind are Splitfires (around $500), yellow jackets ($300), or yaris coil pack mod ($150ish)

 

Link to comment
Share on other sites

  • 1 year later...

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

Link to comment
Share on other sites

  • 4 weeks later...
  • 3 weeks later...
On 3/18/2019 at 7:14 PM, GTSBoy said:

Other way around.  Stock is 1.1mm, gapped down means smaller, ie 0.8mm.

Gapping them down can (and will) help if the coils just aren't good enough to run against the boost....but these days any misfire should be taken as a reason to upgrade the coils.  Yaris, Audi, R35 GTR, etc are all options these days.

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

Link to comment
Share on other sites

48 minutes ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Link to comment
Share on other sites

1 hour ago, SKY5HW said:

gapping down to .06mm is suggested when running high boost with e85 does that sound right?

 

32 minutes ago, Ben C34 said:

0.6mm bro, 0.06mm is not cool!

 

Yes gapping plugs down is reccomemend if coils aren't powerful enough

Note word with emphasis. It's a really weak if. The real recommendation is to improve the coils. Gapping down plugs is a bandaid. Bandaids should not be used where proper fixes exist.

  • Like 1
Link to comment
Share on other sites

On 16/11/2020 at 6:36 PM, Joshnew6 said:

just for closure, I was a newbie to everything to do with Rb's, I was running 25 Psi on E85 with spitfire coils, and the problem ended up being that I was running cheap copper plugs, changed to iridiums and problem solved!!

 

This really doesn't make much sense, unless your copper plugs were old and fouled and the problem was fixed with new plugs. Iridiums dont give you a better spark than coppers, they are just supposed to last longer. But on a modified high performance engine you dont tend to get that longevity out of them and need to replace them more often anyway. The price difference between coppers and iridiums is why most people on here will be running coppers. 

 

But yeh, I agree with GTSBoy here, gapping plugs is SO 2010. Nowadays R35 and Audi R8 conversion kits are a dime a dozen, I'm amazed 'Splitfire' and 'feeler gauges' are still words that people know.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Does this count as a time trial as well? I got all gold in the master super licence (1 lap time trial) and received a McLaren MP4/4 for my trouble.  If anyone else has done this, did you ride the wall right around the first long right hander at Lake Louise snow track to get gold? I couldn't do it any other way... best I could do without riding the was was within 2 tenths of the gold time.
    • I definitely get the low power, sporty car to drive to smash gears but not be doing eleventy million miles an hour! It makes all the normal drives fun!   Rev match tune sounds like the funs! I didn't know the NC had a DBW throttle!   As for me, still have the Skyline, it still has the Barra in it. It's been pushed to the side of the workshop at the moment. Pretty much waiting on me finishing the wiring, and dropping new fuel lines in. Got myself an ACDC Tig end of last year so been teaching myself TIG welding to build a few things for the Skyline. The missus wrote off her GTB liberty at the end of last year, and got it back on salvage rights stupid cheap. It's also still registered, so will mean easier for me to take to the track already done most of the panel damage, just playing "clear the workshop" to make space to pull the motor and box out, fix some oil leaks, replace the clutch, and replace a few minor broken things.  Also got a Lathe at the start of the year, which is adding to the annoyance of no space, which is another reason I'm trying to build things to get more space, to get the Lathe back in a final home for it. It's a BIG lathe, can turn a 355mm diameter, and 1metre between centres... Got it at a steal! So between it and the TIG and old MIG welder, I'll be fabbing some fun little shit up But we've had a lot of shit stuff happening at home, so it's slow going getting things done. But one step at a time!
    • I love Catalunya.  Got a 1:54.632. The AMG is a hoot.
    • I hadn't got that far, my main worry was the connection to the actual calipers themselves. I'm just using new (ish) stock brake lines in the stock setup. I've just had a stud welded to the knuckle that is a little lower than the original stud (so my knuckles have two studs each side) to not have it be stretched so far in previous BBK setups, so the "block" (in the second picture) mounts a little lower for me and I hope I don't need to change anything. I may have even changed the connection to the calipers in the past and have since forgotten I did that. I may not have. Guess how I'm gonna find out. Source: hopium
    • It's more so I'm using the 1x piece line from HEL that goes from the body to the caliper. There's no middle block/mount like the HFM ones or the GKtech ones. There are certain angles/suspension compression where the line actually slightly contacts the ARB. Below of how mine sit (not my photo): How I want it:  
×
×
  • Create New...