Jump to content
SAU Community

Recommended Posts

Hi All,

Newby to Nissans thought I would try something different and later model to what I usually do. I’m an old dude in NSW who loves cars (any type of motorsport car is a good car). I drove a brand new GTR around Amaroo when I was younger and they are awesome cars. I’ve gone 2wd just to get to know the car a bit better and will probably look for a GTR maybe at a later date.  I like building with stock style but with hidden extras and doing some laps every so often.

So I bought this car through the forum and the car is perfect for what I want at the moment. RB20 for the moment, it might stay we will see. I’m not chasing big power but depends when I check the compression and weigh up where to spend some money. Got to find some parts and get rego.

 

 

950AB861-E97F-40A0-9712-63D9AEA21C8F.jpeg

A8A2DD52-3CD1-485D-AC56-261F29416A3C.jpeg

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/476521-r32-first-build-gtst/
Share on other sites

Nice.  That's a charcoal version of mine.

RB20 can make power, but they are nowhere near as pleasant to drive around as a 25. The extra torque, especially off idle, just makes them so much easier to drive around in traffic.  I frequently drive mine 1-3-5 or 2-5, which is not really feasible with the 20.

So I think you either turn the 20 into a 10000 rpm screamer, or plan on a bigger transplant.

Thanks 

I’ll look into it for sure, if it makes more sense I will go that way. As for torque i don’t know what that is, my other cars are NA rotarys. 

I took the roof spoiler off(not my style) 

 

 

1F01C13E-2625-4263-9316-33C7A8B57799.jpeg

92601916-545E-48A8-8B4F-A42AD3CACE36.jpeg

Edited by Ontrack

Pulled the coils off today to have a look and do a compression test. Compression was all 150 with one just over 140 so that’s fine. The fuel/cylinders smell like lacquer so that might need attention too. One of the coils doesn’t look good either. I will have to look into some new coils, I’m going to change the ECU anyway, might need to to do that a bit early now.

 

C9076DEF-D786-40CA-B0E9-A7CF6863293D.jpeg

5A705159-6AFE-4275-9A02-6718E3A21ADA.jpeg

Yes Waiting on some new Splitfire coils and will check the harness too. 

My friends keep laughing at me as they tell me it’s a P platers car. I’m suppose to be having a mid life crisis or something. I don’t understand what they are saying, so I open the boot and out comes the sub and amps. Don’t understand big systems in cars. Cars are for driving not listening to music. Don’t get me wrong music is good but engine noise is better.

 

 

44EFC1D3-E06D-40FE-9603-467B11A884A4.jpeg

2207B491-1A89-4754-AE1C-DAA0358E9EA3.jpeg

  • Like 1

Well got a bit of time and the new splitfire coils arrived. I picked up some new spark plugs too. It seems the harness is completely stuffed. I also got the injectors cleaned and flow tested.  Everything I touch falls apart so I have been replacing lots of rubber lines and working out what they do. 

Need to clean out the fuel tank next, when I bought it the guy said something about the baffles have been taken out, there is a ding in the bottom of the tank and I guess that has knocked them loose. I will look for another I think and give it a clean inside and out. Put a new pump in. I have changed the fuel lines and fuel filter up front already.   

 

2FFC636D-ADEA-4E02-83D4-3B3C32AECAFB.jpeg

Pulled the pump out today and that might be another problem. The hose is spong and melted. The tank will come out for a proper clean out and inspection. Coil harness arrived too so it might be able to be cranked over on the weekend. 

 

808136C0-AFA3-4D3F-B4E4-7AFEE57CE855.jpeg

Everything cleaned out, fresh fuel, new coils, new pump and lines. 

Primed up, gave it a crank and it started first go. Idled perfect and took it for a little drive, ran good. Need to bleed the brakes next. Then look to see about a blue slip

 

581D5304-28C9-440E-8BDA-1B3F72ADE49A.jpeg

34D92B99-1BF8-4752-93EF-B5558B578417.jpeg

  • Like 1
  • 1 month later...

Well been busy doing other cars but finally got rego this week. Didn’t need to much, got knocked back on wiper blades, headlights and rear upper arms. 

 

Funny thing was I went to pick up my son from school and a police car saw me from a distance. He had to put his lights on to get through the traffic to catch up to me. Sitting at some traffic lights he ducked in behind me, so I turned at the lights and gave it a squirt up to 60km. He follow quickly so I changed lanes, he pulled along side of me and looked at me. The disappointment on he face was priceless. I think he was hoping to find some young P plater without P’s on but got some old grey haired guy. 

 

The car drives really well, just some cosmetics to fix and it’s a nice cruiser that steps out sideways quite easy.

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...