Jump to content
SAU Community

Recommended Posts

Hi all,

Currently in the middle of replacing the timing chain on my VQ25DD (2002 M35 Stagea).

While I've got the engine at TDC, and the crankshaft mark and intake cam sprocket marks lined up with the old chain markers. I've found that the top stretch of old chain between intake cam sprockets was too spread apart, so that the new chain can't reach the last tooth to make the new chain marks align with the sprockets.

Hopefully the photos make it clear what I mean. Comparing that section of the old and new chains you can see the difference in length of about half a chain link. The two photos of the cam sprockets show one mark lined up, and the other as best I can make it reach - one tooth too short for the sprocket mark.

The best thing I can think to do is stow the tensioner on one or each of the cam chains and that might give me enough play to nudge the chain over that last tooth. 

Any better ideas or if this is ok to do, or even work as I'm hoping?

hoping @scotty nm35 might be able to weigh in...

Also looking for recommendation on the silicone/rtv product to use to reseal the case on when the time comes.

cheers!

 

IMG_2632.JPG

IMG_2631.JPG

IMG_2630.JPG

IMG_2629.JPG

This might be a silly question (as I don't know these motors at all), but in your chain side-by-side photo, you have 2 pink marks on the top (new?) chain lined up with 2 orange marks on the other chain. I can see the 3rd mark on the top chain is orange.

So whilst all 3 marks on the bottom chain are orange, is there any possibility that you're lining up the wrong marks there?

With the silly question out of the way - I note that the cam gears have slotted holes. Would these be to provide you with the 1/2 a tooth's worth of adjustment to account for chain stretch?

This might be a silly question (as I don't know these motors at all), but in your chain side-by-side photo, you have 2 pink marks on the top (new?) chain lined up with 2 orange marks on the other chain. I can see the 3rd mark on the top chain is orange.
So whilst all 3 marks on the bottom chain are orange, is there any possibility that you're lining up the wrong marks there?
With the silly question out of the way - I note that the cam gears have slotted holes. Would these be to provide you with the 1/2 a tooth's worth of adjustment to account for chain stretch?


No such thing as a silly question.
Photo colour may be misleading, the old chain is two pink for cams, one orange for crank. The new chain is the same but old chain has slight colour fade.

As it happens, I’ve resolved the issue by slightly rotating the cams as required using the hexagonal ring. This is actually mentioned in the manual I just found for the 2003 G35 coupe. Just have to be very careful you’re not turning the cams to break a valve.

I also realised each intake and exhaust cam sprocket marks align with subtle bumps formed on the inside of the rear chain case at TDC. This let me determine that the LHS cams were slightly off mark while the RHS were on mark. Made it easy to choose which one to turn to fit the chain and also have some confidence you’re within reasonable margin of safety as you move the cams a degree or two.
  • 1 month later...
  • 1 month later...

@scotty nm35hey mate completely of topic - I’m trying Message you on sau but can’t get a hold of you re: injector wiring for c34 rb25det - can you pm me so I can’t get in contact 

  • 4 months later...
2 hours ago, Riccardo said:

Can anyone help where too buy one of these timing chain kits for the Vq25dd stagea. Can only find on ebay. Can you only get them from Nissan? 

No you can also get them from Ebay. Have you tried messaging Nicko or Hutchwilco?

  • 1 month later...
On 04/03/2020 at 6:16 PM, Riccardo said:

Can anyone help where too buy one of these timing chain kits for the Vq25dd stagea. Can only find on ebay. Can you only get them from Nissan? 

You can buy those kits in your local Nissan dealer but you will have to wait roughly for about 6 weeks to get all spares parts delivered from Japan, dont think any dealer across the country would have those kits stock up.

Anyway I've purchased my parts in Dubai long time ago and a wallet damage was around $2000 for a full cart of extra parts you would also need if you pop her cherry for a full replacement of any worn/defected internal parts.

 

  • 2 weeks later...
On 3/4/2020 at 11:01 PM, KiwiRS4T said:

No you can also get them from Ebay. Have you tried messaging Nicko or Hutchwilco?

How's it going?

Just came across this: they also sell the parts

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...