Jump to content
SAU Community

Gtx3076r - want longer flutter/dose

HUAWEI

By HUAWEI,
in Engines & Forced Induction

 Share

Recommended Posts

HUAWEI Enthusiast

HUAWEI

Posted
Posted

Hi all. I have a gen 2 3076. It has a 4” intake about 40-50cm long with a stainless steel pod. I am also running an fmic but with a smaller core. Would I be able to get a longer flutter/dose by shortening the intake and reducing diameter to say 3”? Or better off getting a larger front mount. Cheers

no need to flame me about power levels and bad effects of compressor surge etc. currently running speed density, e85 348rwkw happily :) just want some extra noise to boot. 

Link to comment
https://www.sau.com.au/forums/topic/477806-gtx3076r-want-longer-flutterdose/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted (edited)

The country, located south of Albania, East of Greece, North of Syria and Iraq and west of Iran is word filtered to "the sphincter of the universe" and has been for many many years. It didn't used to be fair, but it kind of is these days.

I forgot about it when typing an unrelated use of the name of that country to represent a large, noisy bird with ugly wattles and beady eyes.

Edited by GTSBoy
  • Haha 1
Lithium Grand Master

Lithium

Posted
Posted
2 hours ago, GTSBoy said:

The country, located south of Albania, East of Greece, North of Syria and Iraq and west of Iran is word filtered to "the sphincter of the universe" and has been for many many years. It didn't used to be fair, but it kind of is these days.

I forgot about it when typing an unrelated use of the name of that country to represent a large, noisy bird with ugly wattles and beady eyes.

When I first went to Oz for WTAC a few years ago I arranged to catch up with @Mick_o and @Piggaz for BBQ and rums and me and Mick were sorting out plans for the evening via PM on SAU. 

I could get 3 bottles of spirits in duty free so took an order for them for the evening shenanigans, and was somewhat bemused to be asked for a bottle of "Wild Spincter of the universe".  I double checked he wasn't just joking around and he repeated "Wild sphincter of the universe, Rare breed. definitely."

So yeah, there was a real awkward conversation with the customer service at Sydney duty free until it suddenly dawned on me wtf was going on.  Bloody Australians haha 

  • Like 2
  • Haha 4
Dose Pipe Sutututu Grand Master

Dose Pipe Sutututu

Posted
Posted

GTX compressors generally only make truck/bus style dose, you need the old school 6+6 blade design, they dose sick. So downgrading your turbo might be the only solution.

And to get decent dose, you need long AF FMIC pipe work. If you look at the best dosing cars, their pipe work is super long.

 

  • Like 2
Ben C34 Grand Master

Ben C34

Posted
Posted

I'm in for maximum dose. No one is judging around here. Except for judging people for having no dose.

 

What you really need is  a heaps heavy turbine/comp wheel combo. Wonder how you would go mounting some extra weight off the back of the turbine and compressor nut to keep that bad boy spinning.

actually that's a pretty good Idea that I need to bring to market. Dose nuts. Really long and heavy compressor nuts.

None of this light weight crap. Lead, or that other heavy thing. I'm all over this. No one steal this idea ok guys.

  • Like 1
Ben C34 Grand Master

Ben C34

Posted
Posted
37 minutes ago, Lithium said:

When I first went to Oz for WTAC a few years ago I arranged to catch up with @Mick_o and @Piggaz for BBQ and rums and me and Mick were sorting out plans for the evening via PM on SAU. 

I could get 3 bottles of spirits in duty free so took an order for them for the evening shenanigans, and was somewhat bemused to be asked for a bottle of "Wild Spincter of the universe".  I double checked he wasn't just joking around and he repeated "Wild sphincter of the universe, Rare breed. definitely."

So yeah, there was a real awkward conversation with the customer service at Sydney duty free until it suddenly dawned on me wtf was going on.  Bloody Australians haha 

Oh man. That's rough!

robbo_rb180 Grand Master

robbo_rb180

Posted
Posted
36 minutes ago, Dose Pipe Sutututu said:

GTX compressors generally only make truck/bus style dose, you need the old school 6+6 blade design, they dose sick. So downgrading your turbo might be the only solution.

And to get decent dose, you need long AF FMIC pipe work. If you look at the best dosing cars, their pipe work is super long.

 

i'll happily swap my old school 3076 for the gtx. Can even fab up a hektic intake pipe

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • funkymonkey
      Jacks that fit under GTR lips that can reach the subframe?

      By funkymonkey · Posted

      I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...