Jump to content
SAU Community

Recommended Posts

this is a copy and paste from another forum as my build has been going on for many years, but thought i would finally share it on here.

I have owned the car for since 2002 and until 2007 it was my daily driver and has 254000kms on the body. 

during those years the car ended up with:

  1. Link GTS plug-in
  2. 255L walbro pump
  3. VG30 turbo
  4. FMIC
  5. 3" exhaust
  6. K&N filter
  7. Exedy 5 puk HD clutch

the car was making 180rwkw's, in 2009 after the car sitting round for two years i decided to turn the car into a more track focused car so i went about buying bits. 
vr4 450cc injectors 
R33 RB25DET gearbox 
nismo 1.5way LSD 
BC red adjustable coilover shocks 
adjustable front and rear camber arms, whiteline sway bars 
adjustable front caster arms, rear "traction" rods 
locked hicas 
racetech 4009w seat 
monza harness and stripped interior

 Step17.jpg.d0663edaa254d6f4ba1dbc034495b036.jpg

skyline_inside_touched1.jpg.225f25dc9c9474ab32d8354501c6cc62.jpg

the car was ready for its track day abuse

hairpin.jpg.ad94d2ba9e1339a5a3bc6d1143885f8b.jpg

it survived it's first track day so it got a new set of wheel

skyline_outside3.jpg.11778e32126182b7e14d29d804ed2751.jpg

and went back for more....

sad_skyline3.jpg.97dbfeba4d74d31b1f33a20661f7924a.jpg

i managed to spin every bearing in the bottom end so it was goodbye to the RB20. that was in 2011

this started the long awaited RB30 build that i first started getting bits for in 2004. which has taken 8 years to do (two children, buying a house, getting married all done in that time)

so new parts were purchased:

all the ARP bits:

ARPGoodness.jpg.bee8db6b7e65c2049e58e1d2062a47d1.jpg

a new Exedy triple plate clutch 

clutch_zps24c032e9.jpg.e1cac78e4cf35114279a986d72726f40.jpg

a Borg Warner s360sx turbo with a .91 twin scroll housing

turbo-small.jpg.b15c74a6a9ef400205c872fd4680ea47.jpg

ethanol sensor

ethsensor_zps2eca9889.jpg.012caff484b658908e50e0d4f8722dfb.jpg

Custom CP pistons 8.75:1 and MRP rods with ARP 2000 bolts

20140628_135236_zpsc1b3842a.jpg.86d355f228c8c44b4dcdcffcfa5c8689.jpg

the block was sent to Colliers in Levin for machining and balancing, then taken into my garage, painted and assembled

20140628_162122_zps720e63d1.jpg.64af82fd09ca059240953336940977ca.jpg20140628_135354_zps068bc63b.jpg.e4a9778870f2fd0a353e4e46070eb9c8.jpg20140628_190641_zps413f2002.jpg.259d2fff471e3fdb9d0898012e807f42.jpg

some Tomei 256 poncams were added along with some Kelford valve springs

2014-11-15170558_zpsaa6db7a6.jpg.e9cebc988ee472b2f6736acf0c217f98.jpg

clutch and gearbox fitted then it went into the car

20160109_171412_zpsxcbqnkad.jpg.3f68b19e3c8f594c1261173e661f7fc3.jpg20160109_163411_zpsfvbgrxmi.jpg.3b80c4252d08d29517e267aa2a1ab71f.jpg

more parts were ordered, fitted and fabricated

Greddy intake manifold

20150523_175047_zps661r9lju.jpg.01f43e2fc470f6ce20f843c615693bd6.jpg

-10 fuel rail

20151126_215229_zps6ouwnea3.jpg.d0227558256262c923077eb4f37d17a8.jpg

double pass radiator

IMG-20161101-WA0011_zpsotjstrhx.jpg.2b7ebc3ead0e4393306c5b58b373a1d1.jpg

66mm waste gate

wastegate1_zpsd6909699.jpg.012913063e3349477002c828b07684b6.jpg

Sinco custom RB30 twin scroll manifold

20160308_193022_zpspq0ngpfp.jpg.9ef3232b2226a9da04d95c0dcbc8b072.jpg

custom 4" exhaust fabricated by a mate

20160917_143213_zpswzfwgikn.jpg.1128cecff930cbd36348ef5c3e6d9de7.jpgreceived_10154842234343816_zps1prcrexm.jpeg.e8b37e241b87065317f6207cd17adbb6.jpeg

i then decided that re-wiring the car would be a fun thing, so my mate did all the hard work and i supervised.

20170610_175333_zps6qc5pqpp.jpg.b6f23231c7fa09a93858b69037d819af.jpg

IMG-20170614-WA0004_zpsxs60tolo.jpeg.1478914990efcfec0f5e53147fb45486.jpeg

and so the car was ready for the dyno

69697916_3484973428195168_1424323077906366464_o.thumb.jpg.bdfac6c7aada495e56ee36ecd4888162.jpg

one run in tune and a full tune later the car is now road legal

high boost (17PSI) on BP98 pump gas

20190825_061552.jpg.f7bb2bf331b441194c271945de7d48f1.thumb.jpg.ef661717a327db08efc2a60d8eda9e9b.jpg

then we moved to Ethanol and on 60% got the below results

334563722_allboostsettings.thumb.jpg.c63e5aa0e7c5d02377c4c360f0e8cf22.jpg

1411265133_allboostsettings2.thumb.jpg.50b73f31035a4549746d2f0291b8d6d7.jpg

wookiee.thumb.jpg.0923a5a441eb22d8162fba75df37f042.jpg

and some videos

 

 

and a video a mate did from a dyno day after the run-in and before the full tune when we made the car run a bar of boost

 

 

skyline_outside3.jpg

  • Like 5
Link to comment
https://www.sau.com.au/forums/topic/478769-r32-gts-t-rb30-sedan/
Share on other sites

On 9/24/2019 at 12:08 PM, PranK said:

Oh man, I love this!! 

Any future plans? Or happy as it is (yeah right) ?

Cheers, plans are to enjoy it and get it to the strip and track to see what high gear and high boost feel like

On 9/25/2019 at 5:50 PM, KiwiRS4T said:

What a clean understated looking car! Love the four door look. I want it!

Thanks RS, yeah it doesn't get many looks from people until I lean on it

forgot to mention, current specs are:

RB30E block with S2 R33 RB25DET head 
CP 8.5~7:1 pistons
MRP rods, arp2000 bolts
ARP main studs
Oil pump drive adapter
RB25DET oil pump
Tomei 256 x 8.5 poncams (NVCS)
Lightly ported r33 s2 head
Genuine greddy intake manifold
VH45 throttle body
6x XSpurt 1550cc injectors with flex fuel sensor
150mm intercooler
Sinco twin scroll exhaust manifold
66mm precision waste gate
Borg Warner S300SX 8375 w/ twin scroll .91 housing
4inch exhaust from turbo to back
Vipec i88 ECU 
NZ Wiring cam trigger kit

  • 1 month later...
  • 2 weeks later...
  • 3 weeks later...

So catch can has been made up and it was time for the drags (Dec 7-8). Because the car makes a bunch of hp and to try get it down the track without breakong driveline parts we are running boost by gear (1st 7psi, 2nd 10psi, 3rd 14psi and 4th+5th is 17psi).
Due to weather there was only one day of racing, and unfortunately at our local track you don't get many runs in a day.
So my first run was full of adrenaline and monkey driving, but did a [email protected].
Second run was once again full of adrenaline and monkey driving, this time did a [email protected]. needless to say I was stoked with that run.
For the next run we changed the launch control and turned 4th and 5th up to 20psi. The car launched way better then the first two runs but
Unfortunately I got lots of axle tramp and hooked second while axle tramping, apparently my axles didn't like this and snapped both axles at the CV ends.
So that was the end of my weekend, but we suspect the car would have done an 11 if it had held. For next time I am going to get a clutch slipper valve, put Bilsteins in the back and not run my 18's... Some videos and pictures attached.

IMG-20191207-WA0021.jpg

received_2503557003252235.jpeg

received_516150555649641.jpeg

IMG-20191207-WA0013.jpg

20191215_102706.jpg

IMG-20191204-WA0012.jpeg

  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Food for thought, the stock oil filter thread is a 3/4-16 UNF, which has an ID of about 10 to 12mm (according to ChatGPT lol). Now compare than to an 10AN, which has an ID of about 14mm (Raceworks is 14.2mm, Speed flow is 14.27mm).  
    • Yep, totally get that. However hooking in for Generator back up is only a few hundred bucks for the wiring. You could put a couple of those in (for different circuits explicitly) and run a couple of baby generators. Bonus, you can balance them across different circuits, and now have backups in your backup. I'm looking at buying places that won't even have water etc, and I don't mind the idea of getting off the electric grid either, even with everything you've said. This country already has enough power outages that even the mains grid isn't that reliable anymore. I do agree though on spending a bit more to get better gear, and to add some extra redundancy in to the system too.
    • You can set hard reserves on your battery system, and it can't be discharged past that.  
    • That sounds like an excellent idea. But total self-sufficiency means exactly that. You have no-one else to blame when your system faults out and you have no power for a week or two while it gets fixed. You'd have to go the whole hog and get a diesel genny and all the switchover gear, to get you through such times. And, despite the fact that over 20 years, my system has been pretty reliable**, I have seen so many inverter explosions (or less dramatic deaths), panel and roof JB fires, and so on, over that time, to know that the stuff is the same as any other bulk Chinese manufactured stuff. The failure rate is well above zero - both on the equipment and on behalf of the meth addled installation labour force. And then..... warranty and means of redress against the supplier you bought the gear from. Best I can tell is that only a handful of solar companies are still around within 5 years of starting their advertising pitch. They disappear and phoenix like crazy. So, as per 1st paragraph, I suspect the only way to is go balls deep and spend maybe 2-3 times as much as you might think, so that you have every base covered. Plus, know and understand your gear intimately, so you can diagnose problems, sort them out yourself, etc, etc. Plus, probably have to consider upgrading various parts as the years pass, to maintain compatibility with newer stuff, performance and reliability, etc, etc. Whereas, remaining attached to the grid has an ongoing cost that keeps going up even if you use bugger all power from it. But it does provide the fallback in case of the worst case with your own gear. You either pay up front or as you go, I suspect.
    • Add more solar panels to the array. Call the electricity company and tell them you're moving out... Live off grid electric wise
×
×
  • Create New...