Jump to content
SAU Community

Loss of Power in Boost?

Selli160

By Selli160,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Selli160 Explorer

Selli160

Posted
Posted

Got a basically stock 99 RB25Det Neo Stagea. Just recently had to replace all the coil packs because one had failed so I got some brand-new spit fires for the old girl. About a week after installing them stated to feel like the car was down on power a little when I got on boost. After driving around for a bit I could tell something was up. first gear almost felt like the car was NA with what felt like no extra power when I got on boost.  Second wasn’t as bad had a little extra power on boost but still nowhere near where it was before. 3rd 4th 5th Also sort of felt off (But it’s kind of hard to tell in the high gears). To sum it up Car feels Absolutely normal driving around normally (Not getting on boost). But as soon as you get on boost there is no power. The car sort of hesitates and throughout the rev range the power will tend to fluctuate come in and out a little bit. I’ve been driving it sparingly for the last week and have also noticed that some days it feels like its NA with almost zero power. Others its not so bad. And one day this week the car feels almost normal. So, it’s a little intermittent. Not too sure what’s going on

My first reaction was "it’s probably just a boost leak" but my boost gauge was still siting on 12psi like normal and I’ve got the reference line for it coming directly from the intake manifold so there’s no funny business going on in between.   

Other Thought was it had something to do with spark.  so, I got all new sparkplugs and just got a brand-new set of coils.  I just left the plugs with the stock 1.1mm gap and tested each coil pack/coil pack wire and plug to see if I’m getting a nice blue spark which I am. So that’s crossed of the list

From what I can tell I must have something to do with fuel. Not sure exactly what could be only guess is dying pump, blocked fuel filter, blocked injectors. Note about 3 weeks before all this I used some of that liquid injector cleaner that you put in your fuel tank. possibly dislodged a bit of gunk somewhere in the fuel system and is causing issues?? I have no real way to test the fuel pressure let alone the whole system. Haven’t really messed around much with fuel stuff all that much in my time so any ideas or tips or tricks for trouble shooting would be greatly apricated.

Could it be possible something is stuffed with the ecu???

Link to comment
https://www.sau.com.au/forums/topic/479434-loss-of-power-in-boost/
Share on other sites
Ben C34 Grand Master

Ben C34

Posted
Posted

Can still be a boost leak.

Turbo will be working its   guts out, heaps hotter intake air and higher back pressure..

to test for boost leaks you need to pressure test.

My vote is boost leak.

 

Selli160 Explorer

Selli160

Posted
  • Author
Posted

Hhmm Yeh could still definitely be possible. I might have to look into a pressure test. Still it’s a substantial loss of power just for some higher intake temps. Plus its only the stock turbo and I’ve already got it basically maxed out at 12psi. If it had to work any harder it’d probably disintegrate.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

Replace the fuel filter under the bonnet. Cut it open to see if it is full of crap. While its off turn on the key to see if a decent spurt of fuel comes out. You really need a fuel pressure gauge.

Pressure test the system ...make up a plug with a tyre valve in the end and put it in the  outlet pipe from the turbo and see if it will hold 20 psi.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...