Jump to content
SAU Community

v36 Key Fob Programming

DashyyPC
 Share

Recommended Posts

DashyyPC Collaborator

DashyyPC

Posted
Posted

im hoping @Chris Rogers Can possibly help me but will make the post because i cant DM him.

 

My car was imported in 2017 with 1 key. Found a place who can sell me an OEM programed pretty cheap. Just wondering if anyone in Brisbane can do it?
Nissan (Costly i know but worth a shot) Rejected me because its an import and they cant program to the certain frequency..?

Any help would be awesome.

Link to comment
https://www.sau.com.au/forums/topic/479527-v36-key-fob-programming/
Share on other sites
The Max Mentor

The Max

Posted
Posted

Agreed. Nissan are so full of shit. If you take a look at the Nissan Consult software (I have it here with my Consult III+ scan tool), our vehicles are definitely listed in there.

Maybe the dealership you spoke to doesn't have the Immobiliser auxiliary module for their scan tool but I highly doubt that. Maybe I should look to buying that module for my scan tool as a future consideration, even though I have two keys and the PIN code.

DashyyPC Collaborator

DashyyPC

Posted
  • Author
Posted

They told me they didnt have some specific pin thing for the frequency needed as its not the same as 350/370z.
Which i remember reading a while back that its not as easy to program a key here as people think.

 

But if i can find a local guy who can do it for a bit of $$.. i'd rather give them the money over nissan,

The Max Mentor

The Max

Posted
Posted
2 hours ago, DashyyPC said:

They told me they didnt have some specific pin thing for the frequency needed as its not the same as 350/370z.

That doesn't make any sense to me. My understanding with these vehicles is when you're adding a key to your vehicle, you are programming the BCM to accept its unique signature, not the other way around. So this thing about frequencies smells of horseshit to me.

2 hours ago, DashyyPC said:

Which i remember reading a while back that its not as easy to program a key here as people think.

It's a ballache to say the least, no doubt about it. One thing I can give Ford credit for is that they will allow you to program your own keyfob in their crappy Falcons as long as you already have two working keys on hand. Nissan seem to have made it more difficult but not impossible with the right tools.

I'll go through my Nissan Consult software when I get home and see what this screen is all about because I'm willing to bet that with the appropriate peripheral plugged into the Consult III+ scan tool, that ought to allow the user to plug the key into the slot under the steering wheel and add it to the BCM.
image.png.d2dc421d7efae0f171d25e43a090e907.png

The Max Mentor

The Max

Posted
Posted (edited)

If only I were that well-versed at it! I take it you don't have the little metal tag that would've been supplied by the dealer in Japan to the original owner?

I would need to buy the immobiliser peripheral for my scan tool to have a poke around and see how it works because it turns out that I can't access that menu option without it. However, according to the procedure manual, there are two PIN codes involved. One of them is the PIN code I referred to, which can be obtained by the scan tool or otherwise is physically on the BCM's label. The second code apparently has to be obtained from Nissan's website after entering the other PIN code on their site (I suspect this is the same as the four digit code I have punched into a tiny metal tag that came with my keys when I imported my car). I might buy the immobiliser peripheral for the hell of it. I've spent more money on less useful stuff in my lifetime. :P

More information about procedure can be found here: https://nissan-techinfo.locksmithsdrm.com/sdrm/ni_02_4218/Overview of the SDRM process.pdf

In short, the dealerships have the scan tool and as long as they have the immobiliser peripheral (aka Security module), then they most definitely can do it and if they bullshit you about frequencies, you can tell them that this process is done via their scan tool connected to the OBD port, not over the airwaves.

Otherwise, hopefully there is a very well-equipped locksmith (not talking about his wedding tackle) who is more willing.

Good luck!

Edited by The Max
KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I have a mobile key cutter who has all the gear. He can interrogate the system and make keys to suit...both the transponder and the central locking.  Its a half hour job and he has a number of specialised electronic gizmos. I am sure there is such a person in your city.

The Max Mentor

The Max

Posted
Posted (edited)

OK. I did a bit more homework and I think I have the missing piece in the puzzle.

So, the locksmith/dealer in question needs to have:

  • Consult III+ scan tool (or compatible)
  • Security module (what I was previously terming as the immobiliser peripheral)
  • In the event that the secondary PIN code needs to be calculated - access to Nissan's Techinfo site for their PIN code calculator OR a piece of software released by a clever mob in the UK for about $30

Process:

  1. Plug in scan tool, load the Consult III+ software and enter the Immobilizer menu
  2. Follow the directions given in the software, whereby it will either extract the PIN code from the BCM or you take a note of it from the label on the BCM (will be four digits under the barcode)image.png.11d24f9d1467260e8ef979caf4aed977.png
  3. Secondary PIN code:
    1. If you have the metal tag which has the four digit PIN code punched into it, that will be the secondary PIN code and you enter that when requested by the Consult III+ software
    2. If you do not have this metal tag, then you will need to use either the (ahem) acquired software calculator or have someone with access to Nissan's dealer support website to perform that calculation for you. The resulting calculated secondary PIN code is then entered into your Consult III+ software.
  4. Continue following the directions to program your keyfob and away you go.

Still no mention of "frequencies" anywhere. :)

Edited by The Max
  • Like 1
The Max Mentor

The Max

Posted
Posted

Another thing I forgot to mention is to make sure you have all working keys with you when you do get it done, because they all need to be registered into the BCM. Of course, if you read the Nissan document, you would have already seen that but figured I'd cover that just in case.

Hopefully that's enough ammo, otherwise, as Kiwi suggested, find a decent locksmith who can do it all instead and tell the dealers to eat their own poop they love to shovel.

  • 3 weeks later...
Azzasautoelectrics Newbie

Azzasautoelectrics

Posted
Posted

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

  • Like 2
DashyyPC Collaborator

DashyyPC

Posted
  • Author
Posted
11 hours ago, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

Thanks mate!
Just got to work for the day so once im home ill pull it out and send you a message!

 

Life saver.

DashyyPC Collaborator

DashyyPC

Posted
  • Author
Posted
23 hours ago, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

PM'd!!

  • 3 months later...
  • 3 years later...
Dennis G37 Newbie

Dennis G37

Posted
Posted
On 27/1/2020 at 8:49 PM, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

Wondering if there's anyone in here that can help me with a G37 key. Nissan were hopeless. I've got no idea what I'm doing but have a key that needs programming . Melbourne based 

sonicii Veteran

sonicii

Posted
Posted

If you have an AuDM Infiniti G37, my first suggestion would be one of the ex-infiniti dealers, like Brighton.

however, if you have an imported V36 Skyline, then I am not sure, dealers can be a bit finicky about imports.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...