Jump to content
SAU Community

Recommended Posts

im hoping @Chris Rogers Can possibly help me but will make the post because i cant DM him.

 

My car was imported in 2017 with 1 key. Found a place who can sell me an OEM programed pretty cheap. Just wondering if anyone in Brisbane can do it?
Nissan (Costly i know but worth a shot) Rejected me because its an import and they cant program to the certain frequency..?

Any help would be awesome.

Link to comment
https://www.sau.com.au/forums/topic/479527-v36-key-fob-programming/
Share on other sites

Agreed. Nissan are so full of shit. If you take a look at the Nissan Consult software (I have it here with my Consult III+ scan tool), our vehicles are definitely listed in there.

Maybe the dealership you spoke to doesn't have the Immobiliser auxiliary module for their scan tool but I highly doubt that. Maybe I should look to buying that module for my scan tool as a future consideration, even though I have two keys and the PIN code.

They told me they didnt have some specific pin thing for the frequency needed as its not the same as 350/370z.
Which i remember reading a while back that its not as easy to program a key here as people think.

 

But if i can find a local guy who can do it for a bit of $$.. i'd rather give them the money over nissan,

2 hours ago, DashyyPC said:

They told me they didnt have some specific pin thing for the frequency needed as its not the same as 350/370z.

That doesn't make any sense to me. My understanding with these vehicles is when you're adding a key to your vehicle, you are programming the BCM to accept its unique signature, not the other way around. So this thing about frequencies smells of horseshit to me.

2 hours ago, DashyyPC said:

Which i remember reading a while back that its not as easy to program a key here as people think.

It's a ballache to say the least, no doubt about it. One thing I can give Ford credit for is that they will allow you to program your own keyfob in their crappy Falcons as long as you already have two working keys on hand. Nissan seem to have made it more difficult but not impossible with the right tools.

I'll go through my Nissan Consult software when I get home and see what this screen is all about because I'm willing to bet that with the appropriate peripheral plugged into the Consult III+ scan tool, that ought to allow the user to plug the key into the slot under the steering wheel and add it to the BCM.
image.png.d2dc421d7efae0f171d25e43a090e907.png

If only I were that well-versed at it! I take it you don't have the little metal tag that would've been supplied by the dealer in Japan to the original owner?

I would need to buy the immobiliser peripheral for my scan tool to have a poke around and see how it works because it turns out that I can't access that menu option without it. However, according to the procedure manual, there are two PIN codes involved. One of them is the PIN code I referred to, which can be obtained by the scan tool or otherwise is physically on the BCM's label. The second code apparently has to be obtained from Nissan's website after entering the other PIN code on their site (I suspect this is the same as the four digit code I have punched into a tiny metal tag that came with my keys when I imported my car). I might buy the immobiliser peripheral for the hell of it. I've spent more money on less useful stuff in my lifetime. :P

More information about procedure can be found here: https://nissan-techinfo.locksmithsdrm.com/sdrm/ni_02_4218/Overview of the SDRM process.pdf

In short, the dealerships have the scan tool and as long as they have the immobiliser peripheral (aka Security module), then they most definitely can do it and if they bullshit you about frequencies, you can tell them that this process is done via their scan tool connected to the OBD port, not over the airwaves.

Otherwise, hopefully there is a very well-equipped locksmith (not talking about his wedding tackle) who is more willing.

Good luck!

Edited by The Max

I have a mobile key cutter who has all the gear. He can interrogate the system and make keys to suit...both the transponder and the central locking.  Its a half hour job and he has a number of specialised electronic gizmos. I am sure there is such a person in your city.

OK. I did a bit more homework and I think I have the missing piece in the puzzle.

So, the locksmith/dealer in question needs to have:

  • Consult III+ scan tool (or compatible)
  • Security module (what I was previously terming as the immobiliser peripheral)
  • In the event that the secondary PIN code needs to be calculated - access to Nissan's Techinfo site for their PIN code calculator OR a piece of software released by a clever mob in the UK for about $30

Process:

  1. Plug in scan tool, load the Consult III+ software and enter the Immobilizer menu
  2. Follow the directions given in the software, whereby it will either extract the PIN code from the BCM or you take a note of it from the label on the BCM (will be four digits under the barcode)image.png.11d24f9d1467260e8ef979caf4aed977.png
  3. Secondary PIN code:
    1. If you have the metal tag which has the four digit PIN code punched into it, that will be the secondary PIN code and you enter that when requested by the Consult III+ software
    2. If you do not have this metal tag, then you will need to use either the (ahem) acquired software calculator or have someone with access to Nissan's dealer support website to perform that calculation for you. The resulting calculated secondary PIN code is then entered into your Consult III+ software.
  4. Continue following the directions to program your keyfob and away you go.

Still no mention of "frequencies" anywhere. :)

Edited by The Max
  • Like 1

Another thing I forgot to mention is to make sure you have all working keys with you when you do get it done, because they all need to be registered into the BCM. Of course, if you read the Nissan document, you would have already seen that but figured I'd cover that just in case.

Hopefully that's enough ammo, otherwise, as Kiwi suggested, find a decent locksmith who can do it all instead and tell the dealers to eat their own poop they love to shovel.

  • 3 weeks later...

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

  • Like 2
11 hours ago, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

Thanks mate!
Just got to work for the day so once im home ill pull it out and send you a message!

 

Life saver.

23 hours ago, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

PM'd!!

  • 3 months later...
  • 3 years later...
On 27/1/2020 at 8:49 PM, Azzasautoelectrics said:

Hey lads,

Dashy send me a picture of the numbers on your BCM which is jn the lhf kick panel and I will get your pin code for you mate.

I just recently went through this saga replacing the ECU on the missus 2007 350GT and had to code the two keys that came with the car to the second hand ECU. Simples stuff

Wondering if there's anyone in here that can help me with a G37 key. Nissan were hopeless. I've got no idea what I'm doing but have a key that needs programming . Melbourne based 

If you have an AuDM Infiniti G37, my first suggestion would be one of the ex-infiniti dealers, like Brighton.

however, if you have an imported V36 Skyline, then I am not sure, dealers can be a bit finicky about imports.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...