Jump to content
SAU Community

Recommended Posts

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

Link to comment
https://www.sau.com.au/forums/topic/479555-ecu-problems-on-my-r34-rb25/
Share on other sites

1 hour ago, robin schembri said:

Hi everyone need any info on the adaptronic modular ECU, just before the end of the year my engine builder installed this ECU in my r34 it was faulty, we sent it back and they replaced it with another one, the second ECU was installed and that to was faulty to, has anyone experienced problems with this product or herd of anyone that has.

 

racepace in Bayswater has installed both ECU's and tested both units to be faulty my entire set up is all brand new, I'm at the point where I don't think I want another one and was wondering if anyone had herd of there ECU's being faulty or giving people trouble.

1 hour ago, robin schembri said:

has installed both ECU's and tested both units to be faulty

Yes.....but did they test the 2nd unit BEFORE installing it? If you do Install, then test, and find it broken, you do not know if it was broken on arrival, or f**ked during/after installation. A "brand new" setup is even more likely to break something than an existing wiring setup that was known to work on another ECU.

both ecu's had different issues racepace motorsport know there stuff, they install these units all the time, but since haltech has now bought out adaptronic there seems to be issues poping up.The first ECU was running fine for five days then it had a hissy fit causing all sorts of gremlins, the second ECU had misfire issues when idling and at a certain rev range but everything else seemed to be fine, they even tried it on another car and it did the same thing.i hope someone else can enlighten me on anything they have herd on the grape vine.

Apart from the hassle I presume this is not costing you money? What has Adaptronic got to say?

A Link fan myself but Tao from Hypergear in Campbellfield has been fitting Adaptronics including to R34s with great success. Maybe give him a ring.

there has been a lot of dyno time spent solving the problems which ive been told wont cost me,but the customer service with them is a joke,there is no phone number to contact them and everything has taken way to long, they are now haltech they bought adaptronic out. racepace motorsport contacted them all last week and they didn't even have the decency to return there emails. I was going to go for a link ECU too but was convinced otherwise. Apparently the third ECU is on its way. 

I have heard of someone over at performance forums having issues with a modular ecu when they first came out. The ecu was damaged when it did an auto firmware update. Was sent back to adaptech who proceeded to charge $ to repair it. Customer was not happy to say the least. 

 

Adaptronic support used to be awesome, all my experiences with the previous gen ecu where positive, seems since the takeover things have changed unfortunately.

I asked if they would replace it with one of there haltech units they said yes, but they wouldn't refund the cost of the dyno. So it looks like number 3 ECU is on its way, what are the odds that three ECUS are faulty. 

The odds are so ridiculously high that 2 adaptronics and a Haltech spontaneously explode that it is way more likely Racepace fked it up bigtime (and caused all 3 to die).


This is also obviously pretty damn unlikely, but it's more likely than 3 ECU's randomly failing instantly. ECU's breaking at all is extremely rare, and almost always due to install error.

Make sure they point to point check every wire on the ECU loom plug before they plug it in and power it up. Check all earths are earths, all powers are powers and no signal/sensor wires have 12V or some other shitty error. Just in case.

I have had dumb arse instro-eleccies kill multiple expensive controllers and flame detectors and other stuff by plugging them in, killing them, then going to the commissioning spares and grabbing another. They eventually fix the wiring problem when they run out of spares.

thanks for that, I don't think my nerves could handle it if this ecu fails,,adaptronic has double checked the unit and passed it to be fault free, it is in transit and should be here by the end of the week.i hope everything goes to plan and I can get my car back after 4 weeks, time will tell, thanks everyone for your input makes me feel a lot better.  

3 hours ago, Dose Pipe Sutututu said:

Use a multimeter and check your voltage.

Old Nissans, could have a bad alternator /regulator and voltages could be through the roof and cooking electronics 

 

That could be difficult though.....need to get the engine running first.

19 minutes ago, GTSBoy said:

That could be difficult though.....need to get the engine running first.

Sounds like the car "was" running, then after five days these unlisted issues appeared.

Gut internet mechanic feelzzzz say electrical issue.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...