Jump to content
SAU Community

Recommended Posts

The ZF 8HP is getting lots of praise for it's fast shifts, cost, robustness etc. 

A stand alone control unit for one is around 1.5k AUD - http://htg-tuning.com/

8HP-70 through that supplier is 2.4k, and I'd think you could source one cheaper locally (the 70 and 75 variants are used in 3 Series and 5 Series BMW respectively) The models relate to torque ratings but are apparently under rated (fine for my SR, maybe not for your big boy RB setups).

The supplier states the box will fit the s chassis tunnel "needs a little hammerwork to fit into the tunnel, although not extensive, easily doable". 

Given what a Z32 or CD009 conversion will cost, I wonder if this would be a better choice? 

Faster shifts, no mishifts, flappy paddles, ultimately smoother and faster power delivery, it can skip shift, etc.

I would love to one day do WTAC clubsprint and I'm not sure if an auto swap like that is allowed, the rules are unclear (I've emailed them for clarification).

That aside though, I wonder what that would be like - Looks ok in action here? 



 

Edited by ActionDan
Link to comment
https://www.sau.com.au/forums/topic/479630-zf-8hp-conversion/
Share on other sites

That would be pretty cool in my opinion. Certainly it appears to be very well rated in road car formats. 


One interesting note, is the A90 Supra only uses the 8HP51 (rated to 500nm). I would have expected these to be a higher spec especially given the target market of tuners. 

Anything is possible if you throw the required time & money at it, particularly for race car, not road car.

The only big questions will be;

  • Adaption to the engine. Bellhousing will be the least of it. Getting from the crank/fly to the gearbox will likely require 100% custom shit.
  • How much data exchange the TCU will want with the ECU. Will it demand torque management/reduction for shifts, etc? Will you need to fit sensors somewhere that you don't have now? Is your existing ECU even able to talk to the TCU?

As I understand it, the GCU from HGT does all of that though as mentioned I would expect it would want input from the ECU. 

ECU for my car has not been selected yet, but almost certainly Halaltech as that's my tuners preference. 

They had a Video of one in a Mazda3 so they're already being put in non optioned cars. 

As for mating to the engine, yes bellhousing/adapter plate, no different than me using Z32 or CD009 (but I get there's off the shelf solutions for those options and tailshaft etc).

 

Edited by ActionDan
4 minutes ago, ActionDan said:

yes bellhousing/adapter plate, no different than me using Z32 or CD009

Well.....not quite. Torque converter, right? So, flex plate of some sort, choose a torque converter that will do the job and that is suited to the box's input shaft and pump drive, etc. So, quite a lot of fiddling there that is very different to using Nissan manual boxes.

14 minutes ago, ActionDan said:

Would you not stick with the torque convertor the box comes with? I guess that depends on what flex plate options exist. 

I'd suggest that that would be your first choice. There may or may not be more than 1 TC available for the box, as there is more than one engine application. Choosing among these might come down to best match with torque characteristic of the engine, or it might come down to physical size limitations on the max flex plate diameter that you'll have to work with (which might not be an issue at all - just floating possibilities).

3 minutes ago, ActionDan said:

am I stupid in thinking that an Auto could be faster/smoother than the manual options I was looking at?

Not stupid, no. A fast shifting paddle controlled auto is very likely to be substantially faster around a track, even with the same number of gears and same ratios. With 8 closer spaced gears you're likely to have a better choice of gear coming out of every corner than you would in the 5 or 6 speeders. Maybe only slightly better, but still better. How good it all ends up being will come down to how user friendly it is, how snappy the shifts are, etc, which will likely be 100% specific to your implementation. You don't want to be waiting for a full second after flipping an up or down shift for it to happen.

1 hour ago, ActionDan said:

Good thinking. 

I know there are drive  by wire setups for SR so that shouldn't be "crazy".

DBW piss easy to do, just find a TB(bosch 60-84mm, New mustang is 83mm or LS), get a flange made and welded to manifold, Use a z33/v35 accel pedal as it bolts up and wire to ecu (12v, Gnd, 5v, sensor gnd and 2 Position outputs). I have found it heaps better to tune idle too and allows traction/launch control :27_sunglasses:

Even without DBW (which is easy enough and very sexual) you still could use ignition/fuel cut strategies and transient timing decay controls on up/down shifts.

Of course nothing beats proper torque management through timing, throttle position.

ZF box conversion makes my balls tickle, when shift times of 200ms are possible.. why not?

21 minutes ago, Dose Pipe Sutututu said:

Even without DBW (which is easy enough and very sexual) you still could use ignition/fuel cut strategies and transient timing decay controls on up/down shifts.

Of course nothing beats proper torque management through timing, throttle position.

ZF box conversion makes my balls tickle, when shift times of 200ms are possible.. why not?

gearbox upgrade time for the r33???

42 minutes ago, robbo_rb180 said:

DBW piss easy to do

 

31 minutes ago, Dose Pipe Sutututu said:

you still could use ignition/fuel cut strategies and transient timing decay controls on up/down shifts

 

Yes.....my point was around the throttle blipping on downshift. Can only achieve that wit DBW and it's not just a case of checking a box that says "blip the throttle on downshifts". There's some tuning needs to be done to get it right across the different downshifts (singles and doubles from all gears down except first) and across different vehicle speeds (because it's not always the same size rev blip even for the same gear if you're looking to be able to do it at all possible speeds for that gear.

Wasn't saying it's impossible or hard. Just work.

  • Like 1
16 minutes ago, robbo_rb180 said:

gearbox upgrade time for the r33???

Yeah, I've looked into it already, involved the following:

  • Sell R33 to some crazy person who wants to build a R33 but realises it's just better value to buy mine
  • Buy a BMW F30 340i w/ Factory LSD (has B58 motor)
  • Haha 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...