Jump to content
SAU Community

Recommended Posts

28 minutes ago, PLYNX said:

Been there, done that !

A bit of tetra ethyl lead, av gas with a flick of nitro methane swizzled around with a drop of pure methanol with put hairs on your chest.

And what did you put in your car?

  • Like 1

Lol.

Guys, 1000hp engines may last a season on track. 50 laps is 150km. A year of track days at once a month (more than most) is 1800km.

Sorry but if your 1000hp engine lasts 1800 hard km.. it's still an unreliable piece of crap. And I think someone getting 12 full track days out of a 1000 hp setup, with 50 hot laps per session is beyond what it would reasonably last.

If you're measuring your engine life in hours, then.. yeah.

  • Like 1
On 21/02/2020 at 6:11 AM, GTRAAH said:

WIth the GEN 2 GTX2867R  Twin setup (below link) rated at 1000hp Is it difficult to get this kind of HP?  And around 550KW - 600KW+

Far as turbos go, with a .64 rear and .60 front that is very possible, you can even up size them to GTX3071R. I found factory exhaust setup is very restrictive, so if you can run two short 3 inches pipes hanging out side of the car along with all other supporting mods you should be able to get there.  

13 hours ago, Kinkstaah said:

Lol.

Guys, 1000hp engines may last a season on track. 50 laps is 150km. A year of track days at once a month (more than most) is 1800km.

Sorry but if your 1000hp engine lasts 1800 hard km.. it's still an unreliable piece of crap. And I think someone getting 12 full track days out of a 1000 hp setup, with 50 hot laps per session is beyond what it would reasonably last.

If you're measuring your engine life in hours, then.. yeah.

There are a lot of things I could say to this glorious demo of building a strawman argument, but the most obvious would be - what exactly are you doing in this thread if the sheer mention of 1000hp clearly triggers your fear response?

I don't think it's a straw man argument at all..

The OP clearly posted it with a view to keep it stock looking as they intend to use it as a road car, so "Stock looking" is "Stock looking, Mr Policeman observing my road car"

As many have said, there are 0 instances of this actually being done.
As many have also said, 1000hp RB26's at all, have a limited lifespan on a racetrack, measured in hours in terms of reliability, and they don't look stock.

So to answer the original question, how difficult is it to have a 1000hp, reliable, stock looking setup on the street? I'd say extremely.

You and I both know that a 1000hp setup, cruising around town is only using 50kw or something like that at 100km, cruising around. So it could last 400,000km in such a scenario.

But that isn't what people really care about when they talk about reliability. They care about how many seconds or hours of full throttle time. While 1000hp in 2020 is different to 1000hp in 1995, I still would say it's limited to drags or highway pulls and even then have limited reliability.

WTAC GTR's don't have 1000hp. They certainly don't have 1000hp, and 300,000km of daily driving, and do a track day once a month for multiple years. If you asked the owners to do that, they would definitely insinuate that something would break before then.

Motive DVD ran there stock RB 26 to what 800hp for years of thrashing.  I know not full race pace everyday.

Now will find out how there new engine lasts at 1000hp with all the fruit (still stock crank tho).

Obviously not "stock" looking.

I got told when my engine was built that 10 years (100,000km) has been seen on these engines with normal/drag and some circuit mixed in.  Seems reasonable for 600+hp.

Edited by Stixbnr32

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is [email protected]   
    • So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...