Jump to content
SAU Community

Recommended Posts

Bought a R32 shell as a project 3 days ago! 20de manual, will +t later down the track as the motor is already set up for it apparently.

Started with an R33 sedan 20e auto which got crashed into an armco out drifting (not me) getting turned into a drift pig now!

Link to comment
https://www.sau.com.au/forums/topic/480034-32-build-from-nz/
Share on other sites

On 27/03/2020 at 12:39 AM, MoMnDadGTR said:

Welcome to site m8, let’s see some pics see what the project looks like!

Just now, JordanRochelle said:

 

received_244610773371720.jpeg

This is right when I was picking it up .... 

received_519928722295824.jpeg

 

8 hours ago, Looney_Head said:

welcome from another NZer. looks like a lot of work coming up for you. are you going to put the RB20e out of the R33 into the R32 shell?

Nah, picked up a 20de to drop in. Just need to find a decent manual set up cause there's literally nothing in the car ?

  • Like 1
On 01/04/2020 at 12:15 AM, Looney_Head said:

Manual setups to suit RBs are getting hard to and expensive to find :( good luck.

Throw a TD05-16g on the 20de and it will be a blast.

Ooh yes they are! I've got a 30e box for it but it's still sitting at the opposite end of the country.. 

 

Side note, will an auto rear half of a driveshaft work with a manual front? 

9 hours ago, JordanRochelle said:

Side note, will an auto rear half of a driveshaft work with a manual front? 

i believe so, the chassis mounts for the driveshaft are the same for both auto and manual from what i have seen

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...